Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

REG710NA-2.5

The maker sells this part only as REG710NA-2.5/250 (TI package option addendum / ordering table: the slash suffix is the reel quantity (tape and reel); the bare code is not orderable (p.19)). The DigiKey and Mouser numbers on this page are for REG710NA-2.5/250.

Texas Instruments · DC-DC Converters · SOT-23-6

REG710NA-2.5 from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Vout power_out Output supply. Connect the output capacitor to this pin.
2 GND power_in Ground
3 Enable input Hardware Enable/Disable pin (high=enable)
4 Cpump- passive Connect to the flying capacitor
5 Vin power_in Input supply pin. Connect the input capacitor to this pin.
6 Cpump+ passive Connect to the flying capacitor

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Power Management (PMIC)
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range (all other models, tested startup) VIN 1.8 5.5 V Tested startup; 'All other models' row (REG710-2.5 is not REG71055 or REG710-5) 4
Operating quiescent current IQ 65 100 μA IOUT = 0 mA, TA = 25°C 4
Shutdown current ISD 0.01 1 μA VIN = 1.8 V to 5.5 V, Enable = 0 V, TA = 25°C 4
Logic high input voltage (ENABLE) 1.3 V VIN = 1.8 V to 5.5 V 4
Logic low input voltage (ENABLE) -0.2 0.4 V VIN = 1.8 V to 5.5 V 4
Output voltage (REG710-2.5), IOUT ≤ 10 mA VOUT 2.35 2.5 2.65 V IOUT ≤ 10 mA, 1.8 V ≤ VIN ≤ 5.5 V 5
Output voltage (REG710-2.5), IOUT ≤ 30 mA VOUT 2.35 2.5 2.65 V IOUT ≤ 30 mA, 2 V ≤ VIN ≤ 5.5 V 5
Recommended operating ambient temperature range TA -40 85 °C 4
Supply voltage (absolute maximum) VIN -0.3 6 V 3
Enable input (absolute maximum) Enable -0.3 V Maximum printed as VIN 3
Operating ambient temperature (absolute maximum) TA -55 125 °C 3
Operating junction temperature (absolute maximum) TJ -55 150 °C 3
Storage temperature (absolute maximum) Tstg -55 150 °C 3
Junction-to-ambient thermal resistance (DBV) RθJA 184.4 °C/W 4
Junction-to-case (top) thermal resistance (DBV) RθJC(top) 124.6 °C/W 4
Junction-to-board thermal resistance (DBV) RθJB 30.6 °C/W 4
Junction-to-top characterization parameter (DBV) ψJT 22.1 °C/W 4
Junction-to-board characterization parameter (DBV) ψJB 30.1 °C/W 4
Logic high input current 100 nA VIN = 1.8 V to 5.5 V, TA = 25°C 4
Logic low input current 100 nA VIN = 1.8 V to 5.5 V, TA = 25°C 4
Nominal output current Iout 30 mA TA = 25°C 5
Short circuit output current Isc 100 mA TA = 25°C 5
Ripple voltage 35 mVPP IOUT = 30 mA, TA = 25°C 5
Oscillator frequency 1 MHz 4
Thermal shutdown temperature 160 °C 5
Thermal shutdown recovery temperature 140 °C 5

CAD (KiCad official)

  • Symbol: REG710NA-2.5
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: reg710na-2-5-etched.step / reg710na-2-5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); reg710na-2-5.step / reg710na-2-5.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (39 pp, sha256 53f7040159d99c87, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF