Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

GZP6847A010KPP50K

Sencoch Semiconductor · Pressure Sensors · DIP-6

GZP6847A010KPP50K from Sencoch Semiconductor, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected Listed as 无定义 (no definition) in the electrical connection table, so the datasheet assigns no function to this pin.
2 VDD power_in Supply input for the 5 V variant at (5±0.25) V DC per the performance table, with 3.0-5.5 V supply stated in the features; only one of pins 2 and 4 needs to be connected, a 0.1 µF capacitor is recommended between VDD and GND, and an overvoltage of 6.5 Vdc may destroy the circuit.
3 GND power_in Ground reference; only one of pins 3 and 6 needs to be connected, and the module has no reverse-polarity protection so supply polarity must be observed.
4 VDD power_in Supply input paralleled with pin 2; only one of pins 2 and 4 needs to be connected, with the same 3.0-5.5 V supply range and 6.5 Vdc overvoltage limit.
5 OUT output Analog output signal, 0.5-4.5 V (customizable) referenced to the supply voltage, with a stated output load current of 5 mA.
6 GND power_in Ground reference; only one of pins 3 and 6 needs to be connected.

Key specifications

Parameter Value
Manufacturer Sencoch Semiconductor
Package DIP-6
Category Sensors
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
输入共模信号抑制比 (Common-mode rejection ratio) 80 110 dB 5
短路电流限制 (Short-circuit current limit) 15 20 25 mA 5
精度 (Accuracy) -1 1 %Span 0~70℃ output error (incl. linearity, repeatability, hysteresis) 5
零点温度漂移 (Zero-point temperature drift) -0.03 0.03 %FS/℃ 5
满量程温度漂移 (Full-scale temperature drift) -0.03 0.03 %FS/℃ 5
补偿温度 (Compensation temperature) 0 60 ℃ 可定制 (customizable) 5
工作温度 (Operating temperature) -20 100 ℃ 5
贮存温度 (Storage temperature) -30 150 ℃ 5
输出信号 (Output signal) 0.5 4.5 V 可定制 (customizable) 5
过载压力 Rated (Rated overload pressure) 4 × 量程≤60kPa 5
破坏压力 (Burst pressure) 5 × 量程≤60kPa 5
供电电压 (Supply voltage, table 2) 5.5 V 5
供电电压 (Supply voltage, product features) 3 5.5 V 4
供电电源 (Supply, performance indicators) 5 V (5±0.25)V DC; reference temperature 25℃ 4
工作电流 (Operating current) 1700 uA @25℃ 5
PSRR 60 dB 5
输出电流负载 (Output current load) 5 mA 5
滤波电容 (Filter capacitor) 100 nF 5
上限钳位电压 (Upper clamp voltage) 1 VDD 5
下限钳位电压 (Lower clamp voltage) 0 VDD 5
过载电压 (Overload voltage) 6.5 Vdc 6

CAD (KiCad official)

  • Symbol: GZP6847A010KPP50K
  • Footprint: Package_DIP:DIP-6_W7.62mm
  • 3D model: DIP-6 (KiCad packages3D, STEP)
  • 3D model files: gzp6847a010kpp50k-etched.step / gzp6847a010kpp50k-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gzp6847a010kpp50k.step / gzp6847a010kpp50k.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Sencoch Semiconductor datasheet (13 pp, sha256 6faba1d2ed07c8c4, retrieved 2026-10-28, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF