component
MCP6V11UT-E
Public Made by Adomby adom
Microchip Tech Precision Op Amps, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMCP6V11UT-E
Microchip Tech · Precision Op Amps · SC-70-5
MCP6V11UT-E from Microchip Tech, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN+ | power_in | Non-inverting input is a high-impedance, low-bias-current CMOS input whose common-mode range is VSS - 0.15 V to VDD + 0.2 V at +25°C. |
| 2 | VSS | power_in | Negative power supply, normally tied to ground in single-supply use, with VDD held 1.6 V to 5.5 V above it. |
| 3 | VIN- | power_in | Inverting input is a high-impedance, low-bias-current CMOS input whose common-mode range is VSS - 0.15 V to VDD + 0.2 V at +25°C. |
| 4 | VOUT | output | Analog output is a low-impedance voltage source that drives the external load. |
| 5 | VDD | power_in | Positive power supply, 1.6 V to 5.5 V above VSS, which requires a local bypass capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SC-70-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | -8 | 8 | µV | TA = +25°C | 3 | |
| Input offset voltage drift (linear temperature coefficient) | TC1 | -50 | 50 | nV/°C | TA = -40°C 至 +125°C | 3 | |
| Power supply rejection ratio | PSRR | 118 | 135 | dB | 3 | ||
| Input bias current | IB | 0 | 2.9 | 5 | nA | TA = +125°C | 3 |
| Input offset current | IOS | -1 | 0.4 | 1 | nA | TA = +125°C | 3 |
| Common-mode rejection ratio | CMRR | 108 | 125 | dB | VDD = 1.6V, VCM = -0.15V 至 1.8V | 4 | |
| Common-mode rejection ratio | CMRR | 119 | 135 | dB | VDD = 5.5V, VCM = -0.15V 至 5.7V | 4 | |
| Open-loop DC gain (large signal) | AOL | 100 | 120 | dB | VDD = 1.6V, VOUT = 0.3V 至 1.4V | 4 | |
| Open-loop DC gain (large signal) | AOL | 112 | 135 | dB | VDD = 5.5V, VOUT = 0.3V 至 5.3V | 4 | |
| Supply voltage | VDD | 1.6 | 5.5 | V | 4 | ||
| Quiescent current per amplifier (MCP6V11/1U) | IQ | 4 | 7.5 | 11 | µA | IO = 0 | 4 |
| Power-on-reset trip voltage | VPOR | 0.9 | 1.5 | V | 4 | ||
| Specified temperature range | TA | -40 | 125 | °C | 5 | ||
| Operating temperature range | TA | -40 | 125 | °C | 5 | ||
| Storage temperature range | TA | -65 | 150 | °C | 5 | ||
| Supply voltage VDD -VSS (absolute maximum) | VDD -VSS | 6.5 | V | 3 | |||
| Current at input pins | -2 | 2 | mA | 3 | |||
| Output and supply pin current | -30 | 30 | mA | 3 | |||
| Maximum junction temperature | 150 | °C | 3 | ||||
| ESD protection (human body model) | 2 | kV | HBM | 3 | |||
| ESD protection (charged device model) | 1.5 | kV | CDM | 3 | |||
| ESD protection (machine model) | 400 | V | MM | 3 | |||
| Input bias current | IB | 5 | pA | 3 | |||
| Input bias current | IB | 17 | pA | TA = +85°C | 3 | ||
| Input offset current | IOS | 50 | pA | 3 | |||
| Input offset current | IOS | 80 | pA | TA = +85°C | 3 | ||
| Input offset voltage quadratic temperature coefficient | TC2 | 0.08 | nV/°C2 | TA = -40°C 至 +125°C | 3 | ||
| Short-circuit output current | ISC | 5 | mA | VDD = 1.6V | 4 | ||
| Short-circuit output current | ISC | 17 | mA | VDD = 5.5V | 4 | ||
| Gain bandwidth product | GBWP | 80 | kHz | 5 | |||
| Slew rate | SR | 0.03 | V/µs | 5 | |||
| Phase margin | PM | 70 | ° | G = +1 | 5 | ||
| Input noise voltage (0.01 Hz to 1 Hz) | Eni | 0.67 | µVP-P | f = 0.01 Hz 至 1 Hz | 5 | ||
| Input noise voltage (0.1 Hz to 10 Hz) | Eni | 2.1 | µVP-P | f = 0.1 Hz 至 10 Hz | 5 | ||
| Input noise voltage density | eni | 102 | nV/Hz | f < 500 Hz | 5 | ||
| Input noise current density | ini | 4 | fA/Hz | 5 | |||
| Intermodulation distortion (AC) | IMD | 50 | µVPK | VCM 谱线 = 50 mVPK （100 Hz 处），GN = 1 | 5 | ||
| Startup time | tSTR | 2 | ms | G = +1， 0.1% VOUT 稳定 （注 2） | 5 | ||
| Offset correction settling time | tSTL | 300 | µs | G = +1， VIN 阶跃 2V， VOS 处于距离其最终值 100 µV 的范围内 | 5 | ||
| Output overdrive recovery time | tODR | 450 | µs | G = -10， ±0.5V 输入过驱动至 VDD/2， VIN 50% 点至 VOUT 90% 点 （注 3） | 5 | ||
| Thermal resistance, 5-pin SC-70 (junction to ambient) | JA | 209 | °C/W | 5 引脚 SC-70 | 5 |
CAD (KiCad official)
- Symbol:
MCP6V11UT-E - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
mcp6v11ut-e-etched.step/mcp6v11ut-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp6v11ut-e.step/mcp6v11ut-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (50 pp, sha256
1dc6467b42dc413d, retrieved 2026-10-19, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).