Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NT3H2111W0FTTJ

NXP Semicon · RF Chips · MSOP-8

NT3H2111W0FTTJ from NXP Semicon, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LA passive Antenna connection LA; the NFC coil connects between LA and LB and supplies both energy and data to the tag.
2 VSS power_in Ground (GND) reference pin for the device.
3 SCL input Serial clock input for the I2C interface.
4 FD output Open-drain field detection output that is pulled low on configured NFC events and requires an external pull-up resistor greater than 2 kΩ.
5 SDA bidirectional Serial data line for the I2C interface.
6 VCC power_in VCC supply input from an external power supply, shown as 1.2 V to 3.6 V in the FD example circuit.
7 VOUT power_out Voltage output from energy harvesting, which may also be used as the field detection trigger.
8 LB passive Antenna connection LB, paired with LA to form the NFC coil connection.

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package MSOP-8
Category RF & Radio
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage temperature Tstg -55 125 °C 67
Maximum junction temperature Tj(max) 105 °C 67
Electrostatic discharge voltage (HBM) VESD 2 kV human body model (HBM) 67
Electrostatic discharge voltage (CDM) VESD 1 kV charge device model (CDM) 67
Supply voltage on pin VCC VDD -0.5 4.6 V 67
Input voltage on pin FD, SDA, SCL Vi -0.5 4.6 V 67
Input current on pin LA, LB Ii 40 mA 67
RF input voltage on pin LA, LB Vi(RF) 4.6 Vpeak 67
Supply voltage VCC 1.67 3.6 V supplied via VCC only 68
Operating ambient temperature Tamb -40 25 105 °C 68
Input capacitance LA-LB CIC 44 50 56 pF f=13.56 MHz, VLA-LB=2.4 VRMS 68
Supply current, idle bus, I2C at 400 kHz, VCC=1.8 V IDD 185 μA VCC=1.8 V I2C@400KHz 68
Supply current, I2C at 400 kHz, VCC=2.5 V IDD 210 μA VCC=2.5 V I2C@400KHz 68
Supply current, I2C at 400 kHz, VCC=3.3 V IDD 240 μA VCC=3.3 V I2C@400KHz 68
LOW-level output voltage (I2C pins) VOL 0.4 V IOL= 3 mA; VCC > 2 V 68
LOW-level output voltage (I2C pins) VOL 0.2 V IOL= 2 mA; VCC < 2 V 68
Input capacitance SCL and SDA pin Ci 2.4 pF 68
Leakage current (I2C pins) IL 10 μA 0 V and VCC,max 68
SCL high time thigh 950 ns fast mode 400 kHz 68
LOW-level output voltage (FD pin) VOL 0.4 V IOL= 4 mA; VCC > 2 V 68
LOW-level output voltage (FD pin) VOL 0.2 V IOL= 3 mA; VCC < 2 V 68
Leakage current (FD pin) IL 1.5 10 μA 68
Retention time tret 20 50 year Tamb 69
Write endurance Nendu(W) 200000 cycle Tamb 69
Write endurance Nendu(W) 500000 1e+06 cycle -40 °C to 95 °C 69
Thermal resistance junction-ambient, TSSOP8 package RTH_JA 211 K/W JEDEC 2s2p board and TSSOP8 package 68
Supply current, idle bus, VCC=1.8 V IDD 160 μA I2C; idle bus 68
Supply current, idle bus, VCC=3.3 V IDD 195 μA I2C; idle bus 68
Input frequency fi 13.56 MHz 68

CAD (KiCad official)

  • Symbol: NT3H2111W0FTTJ
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: nt3h2111w0fttj-etched.step / nt3h2111w0fttj-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); nt3h2111w0fttj.step / nt3h2111w0fttj.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (84 pp, sha256 44a7cbee12209991, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF