3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA134PA
Texas Instruments · Audio Amplifiers · PDIP-8
OPA134PA from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Do not connect this pin; the datasheet states existing layouts before revision B do not need redesign. |
| 2 | -IN | input | Inverting input; input pins are diode-clamped to the power-supply rails and input signals more than 0.5V beyond the rails must be current limited to 10mA or less. |
| 3 | +IN | input | Noninverting input; input pins are diode-clamped to the power-supply rails and input signals more than 0.5V beyond the rails must be current limited to 10mA or less. |
| 4 | V- | power_in | Negative (lowest) power supply; the device operates from ±2.5V to ±18V dual supply or 5V to 36V single supply. |
| 5 | NC | unconnected | Do not connect this pin; the datasheet states existing layouts before revision B do not need redesign. |
| 6 | OUT | output | Amplifier output; output current is limited internally to approximately sourcing 36mA and sinking -30mA at 25°C, and short-circuit to ground is continuous. |
| 7 | V+ | power_in | Positive (highest) power supply; absolute maximum supply voltage (V+) - (V-) is 36V. |
| 8 | NC | unconnected | No internal connection; float this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, (V+), (V-) Single supply | VS | 36 | V | Single supply | 5 | ||
| Input current | -10 | 10 | mA | 5 | |||
| Operating temperature | TA | -40 | 125 | °C | 5 | ||
| Junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature | Tstg | -55 | 125 | °C | 5 | ||
| Supply voltage, (V+), (V-) Dual supply | VS | 2.5 | 15 | 18 | V | Dual supply | 5 |
| Supply voltage, (V+), (V-) Single supply | VS | 5 | 30 | 36 | V | Single supply | 5 |
| Ambient temperature | TA | -40 | 85 | °C | 5 | ||
| Input offset voltage | VOS | -3.5 | 3.5 | mV | 7 | ||
| Input bias current | IB | -100 | 5 | 100 | pA | 7 | |
| Input offset current | IOS | -50 | 2 | 50 | pA | 7 | |
| Power-supply rejection ratio | PSRR | 90 | 106 | dB | 5V ≤ VS ≤ 36V | 7 | |
| Common-mode rejection ratio | CMRR | 86 | 100 | dB | -12.5V ≤ VCM ≤ 11.5V | 7 | |
| Common-mode rejection ratio | CMRR | 90 | dB | TA = -40°C to +85°C | 7 | ||
| Open-loop voltage gain | AOL | 104 | 120 | dB | RL = 10kΩ, -14.5V ≤ VO ≤ 13.8V | 7 | |
| Quiescent current (per amplifier) | IQ | 4 | 5 | mA | IO = 0mA | 8 | |
| Junction-to-ambient thermal resistance (PDIP, P) | RθJA | 73 | °C/W | 6 | |||
| Junction-to-case (top) thermal resistance (PDIP, P) | RθJC(top) | 50 | °C/W | 6 | |||
| Junction-to-board thermal resistance (PDIP, P) | RθJB | 36 | °C/W | 6 | |||
| Junction-to-top characterization parameter (PDIP, P) | ΨJT | 17 | °C/W | 6 | |||
| Junction-to-board characterization parameter (PDIP, P) | ΨJB | 35 | °C/W | 6 |
CAD (KiCad official)
- Symbol:
OPA134PA - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
opa134pa-etched.step/opa134pa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa134pa.step/opa134pa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
ede0a2dfc224c765, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).