component
GC26E31S
Public Made by Adomby adom
SX-globalchip LVDS ICs, SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownGC26E31S
SX-globalchip · LVDS ICs · SOP-16
GC26E31S from SX-globalchip, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1A | input | Channel 1 driver input, TTL-compatible (VIH min 1.3 V, VIL max 0.8 V). |
| 2 | 1Y | output | Channel 1 complementary differential driver output Y, tri-state, with ±30 mA drive capability. |
| 3 | 1Z | output | Channel 1 complementary differential driver output Z, tri-state, with ±30 mA drive capability. |
| 4 | G | input | Active-high enable control shared by all four drivers. |
| 5 | 2Z | output | Channel 2 complementary differential driver output Z, tri-state, with ±30 mA drive capability. |
| 6 | 2Y | output | Channel 2 complementary differential driver output Y, tri-state, with ±30 mA drive capability. |
| 7 | 2A | input | Channel 2 driver input, TTL-compatible (VIH min 1.3 V, VIL max 0.8 V). |
| 8 | GND | power_in | Ground reference for the device. |
| 9 | 3A | input | Channel 3 driver input, TTL-compatible (VIH min 1.3 V, VIL max 0.8 V). |
| 10 | 3Y | output | Channel 3 complementary differential driver output Y, tri-state, with ±30 mA drive capability. |
| 11 | 3Z | output | Channel 3 complementary differential driver output Z, tri-state, with ±30 mA drive capability. |
| 12 | GN | input | Active-low enable control shared by all four drivers. |
| 13 | 4Z | output | Channel 4 complementary differential driver output Z, tri-state, with ±30 mA drive capability. |
| 14 | 4Y | output | Channel 4 complementary differential driver output Y, tri-state, with ±30 mA drive capability. |
| 15 | 4A | input | Channel 4 driver input, TTL-compatible (VIH min 1.3 V, VIL max 0.8 V). |
| 16 | VCC | power_in | Supply pin; the electrical table gives an operating range of 2.5 V to 5.5 V (typ 3.3 V), with absolute maximum VCC of -0.3 V to 7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SX-globalchip |
| Package | SOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VCC | -0.3 | 7 | V | 4 | ||
| Input voltage range (absolute maximum) | -0.5 | 7 | V | 4 | |||
| Operating temperature (absolute maximum) | Top | -40 | 130 | ℃ | 4 | ||
| Junction temperature (absolute maximum) | Tjmax | -40 | 150 | ℃ | 4 | ||
| Storage temperature | Tstg | -60 | 150 | ℃ | 4 | ||
| ESD protection, human body model | ESD | -15000 | 15000 | V | 4 | ||
| Supply voltage | VCC | 2.5 | 3.3 | 5.5 | V | 4 | |
| High-level input voltage | VIH | 1.3 | V | 4 | |||
| Low-level input voltage | VIL | 0.8 | V | 4 | |||
| High-level output current | IOH | -30 | mA | 4 | |||
| Low-level output current | IOL | 30 | mA | 4 | |||
| Operating temperature (recommended) | Ta | -40 | 120 | ℃ | 4 | ||
| Input clamp voltage | VIK | 0.5 | 0.85 | 1.5 | V | II=-18mA | 4 |
| High-level output voltage | VOH | 2.5 | 3.1 | V | IOH=-20mA | 4 | |
| Low-level output voltage | VOL | 0.2 | 0.4 | V | IOL=20mA | 4 | |
| Three-state output current | IOZ | 100 | 150 | uA | VO=0.5V | 4 | |
| Three-state output current | IOZ | 100 | 130 | uA | VO=2.5V | 4 | |
| Input current | II | 10 | 20 | uA | VCC = 0 or 3.6 V, VI = 0 or 5.5 V | 4 | |
| High-level input current | IIH | 50 | 80 | uA | VI=2.7V | 4 | |
| Low-level input current | IIL | 50 | 80 | uA | VI=0.4V | 4 | |
| Output short-circuit current | Ios | -30 | 130 | mA | VO = VCC or GND | 4 | |
| Supply current | Icc | 120 | 160 | uA | VI = VCC or GND, No load, enable; 关断输出 | 4 | |
| Low-to-high propagation delay | tPLH | 4 | 10 | 15 | ns | CL=30pF,S1 和 S2 断开 | 4 |
| High-to-low propagation delay | tPHL | 4 | 10 | 15 | ns | CL=30pF,S1 和 S2 断开 | 4 |
| Output enable time to high level | tPZH | 10 | 20 | ns | CL=30pF,RL=75 欧 | 5 | |
| Output enable time to low level | tPZL | 10 | 20 | ns | CL=30pF,RL=180 欧 | 5 | |
| Output disable time from high level | tPHZ | 10 | 20 | ns | CL=10pF,S1 和 S2 闭合 | 5 | |
| Output disable time from low level | tPLZ | 10 | 20 | ns | 5 | ||
| Skew between rising and falling propagation delay | TSKEW | 1 | 3 | ns | CL=30pF,S1 和 S2 断开 | 5 |
CAD (KiCad official)
- Symbol:
GC26E31S - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
gc26e31s-etched.step/gc26e31s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gc26e31s.step/gc26e31s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SX-globalchip datasheet (9 pp, sha256
4d23918822f66407, retrieved 2026-10-29, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).