3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSIT1602BC-11-XXN-38.400000D
SiTime · Pre-programmed Oscillators · SMD2520-4P
SIT1602BC-11-XXN-38.400000D from SiTime, in a SMD2520-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No Connect option (feature code N): the device always outputs the specified frequency regardless of any voltage between 0 and Vdd or open on this pin, which has no function. |
| 2 | GND | power_in | Electrical ground. |
| 3 | OUT | output | Oscillator output, LVCMOS/HCMOS compatible. |
| 4 | VDD | power_in | Power supply voltage, 2.25 V to 3.63 V for the XX option, with a 0.1 µF or higher capacitor required between Vdd and GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SiTime |
| Package | SMD2520-4P |
| Category | Crystals/Oscillators/Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency Stability | F_stab | -20 | 20 | ppm | Inclusive of initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load | 1 | |
| Output Frequency | f | 38.4 | MHz | Ordering code frequency 38.400000 | 13 | ||
| Operating Temperature Range (Extended Commercial) | T_use | -20 | 70 | °C | Extended Commercial | 1 | |
| Supply Voltage Vdd_XX | Vdd_XX | 2.25 | 3.63 | V | 1 | ||
| Current Consumption | Idd | 3.8 | 4.5 | mA | No load condition, f = 20 MHz, Vdd_XX | 1 | |
| Duty Cycle | DC | 45 | 55 | % | All Vdds. See Duty Cycle definition in Figure 3 and Footnote 6 | 2 | |
| Rise/Fall Time | Tr, Tf | 2 | ns | 20% - 80% Vdd_XX | 2 | ||
| Output High Voltage | VOH | 90 | % Vdd | IOH = -4 mA (Vdd_3.0 and Vdd_3.3); IOH = -3 mA (Vdd_2.8 and Vdd_2.5); IOH = -2 mA (Vdd_1.8) | 2 | ||
| Output Low Voltage | VOL | 10 | % Vdd | IOH = -4 mA (Vdd_3.0 and Vdd_3.3); IOH = -3 mA (Vdd_2.8 and Vdd_2.5); IOH = -2 mA (Vdd_1.8) | 2 | ||
| Startup Time | T_start | 5 | ms | Measured from the time Vdd reaches its rated minimum value | 2 | ||
| RMS Period Jitter | T_jitt | 1.8 | 3 | ps | f = 75 MHz, Vdd_XX | 2 | |
| Peak-to-peak Period Jitter | T_pk | 12 | 25 | ps | f = 75 MHz, Vdd_XX | 2 | |
| RMS Phase Jitter (random) | T_phj | 0.5 | 0.9 | ps | f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz, Vdd_XX | 2 | |
| RMS Phase Jitter (random) | T_phj | 1.3 | 2 | ps | f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz, Vdd_XX | 2 | |
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Vdd | Vdd | -0.5 | 4 | V | 3 | ||
| Electrostatic Discharge | 2000 | V | 3 | ||||
| Soldering Temperature | 260 | °C | follow standard Pb free soldering guidelines | 3 | |||
| Junction Temperature | 150 | °C | Exceeding this temperature for extended period of time may damage the device | 3 | |||
| Maximum Operating Junction Temperature | 80 | °C | Max operating ambient temperature 70°C | 3 | |||
| Thermal Resistance JA, 4 Layer Board (2520) | θJA | 117 | °C/W | 2520 package, 4 layer board | 3 | ||
| Thermal Resistance JA, 2 Layer Board (2520) | θJA | 222 | °C/W | 2520 package, 2 layer board | 3 | ||
| Thermal Resistance JC, Bottom (2520) | θJC | 26 | °C/W | 2520 package | 3 |
CAD (KiCad official)
- Symbol:
SIT1602BC-11-XXN-38.400000D - Footprint:
Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm - 3D model: SMD2520-4P (KiCad packages3D, STEP)
- 3D model files:
sit1602bc-11-xxn-38-400000d-etched.step/sit1602bc-11-xxn-38-400000d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sit1602bc-11-xxn-38-400000d.step/sit1602bc-11-xxn-38-400000d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SiTime datasheet (18 pp, sha256
70f0fbf9f24afbd0, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).