Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC16LF722-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil

PIC16LF722-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RE3/MCLR/VPP input Input-only RE3 digital input, or master clear (MCLR) reset input with internal pull-up, or high-voltage programming voltage (VPP) input.
2 RA0/AN0/SS bidirectional General purpose I/O, A/D channel 0 input, or SSP slave select input (SS can be moved to RA0 via APFCON; VCAP function is not present on LF devices).
3 RA1/AN1 bidirectional General purpose I/O or A/D channel 1 input.
4 RA2/AN2 bidirectional General purpose I/O or A/D channel 2 input.
5 RA3/AN3/VREF bidirectional General purpose I/O, A/D channel 3 input, or A/D voltage reference input.
6 RA4/CPS6/T0CKI bidirectional General purpose I/O, capacitive sensing input 6, or Timer0 clock input.
7 RA5/AN4/CPS7/SS bidirectional General purpose I/O, A/D channel 4 input, capacitive sensing input 7, or SSP slave select input (VCAP function is not present on LF devices).
8 VSS power_in Ground reference.
9 RA7/OSC1/CLKIN bidirectional General purpose I/O, crystal/resonator connection (LP, XT, HS modes), external clock input (EC mode) or RC oscillator connection (RC mode).
10 RA6/OSC2/CLKOUT bidirectional General purpose I/O, crystal/resonator connection (LP, XT, HS modes), or FOSC/4 clock output (VCAP function is not present on LF devices).
11 RC0/T1OSO/T1CKI bidirectional General purpose I/O, Timer1 oscillator connection, or Timer1 clock input.
12 RC1/T1OSI/CCP2 bidirectional General purpose I/O, Timer1 oscillator connection, or Capture/Compare/PWM2 (CCP2 can alternatively be placed on RB3).
13 RC2/CCP1 bidirectional General purpose I/O or Capture/Compare/PWM1.
14 RC3/SCK/SCL bidirectional General purpose I/O, SPI clock, or I2C clock.
15 RC4/SDI/SDA bidirectional General purpose I/O, SPI data input, or I2C data input/output.
16 RC5/SDO bidirectional General purpose I/O or SPI data output.
17 RC6/TX/CK bidirectional General purpose I/O, USART asynchronous transmit, or USART synchronous clock.
18 RC7/RX/DT bidirectional General purpose I/O, USART asynchronous receive input, or USART synchronous data.
19 VSS power_in Ground reference.
20 VDD power_in Positive supply; 1.8V-3.6V operation for PIC16LF722.
21 RB0/AN12/CPS0/INT bidirectional General purpose I/O with interrupt-on-change and individually enabled pull-up, A/D channel 12 input, capacitive sensing input 0, or external interrupt.
22 RB1/AN10/CPS1 bidirectional General purpose I/O with interrupt-on-change and individually enabled pull-up, A/D channel 10 input, or capacitive sensing input 1.
23 RB2/AN8/CPS2 bidirectional General purpose I/O with interrupt-on-change and individually enabled pull-up, A/D channel 8 input, or capacitive sensing input 2.
24 RB3/AN9/CPS3/CCP2 bidirectional General purpose I/O with interrupt-on-change and individually enabled pull-up, A/D channel 9 input, capacitive sensing input 3, or Capture/Compare/PWM2 (alternate CCP2 location).
25 RB4/AN11/CPS4 bidirectional General purpose I/O with interrupt-on-change and individually enabled pull-up, A/D channel 11 input, or capacitive sensing input 4.
26 RB5/AN13/CPS5/T1G bidirectional General purpose I/O with interrupt-on-change and individually enabled pull-up, A/D channel 13 input, capacitive sensing input 5, or Timer1 gate input.
27 RB6/ICSPCLK bidirectional General purpose I/O with interrupt-on-change and individually enabled pull-up, serial programming clock (ICSPCLK) or in-circuit debug clock.
28 RB7/ICSPDAT bidirectional General purpose I/O with interrupt-on-change and individually enabled pull-up, ICSP data I/O or in-circuit debug data I/O.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SSOP-28-208mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage on VDD with respect to VSS, PIC16LF72X -0.3 4 V 200
Voltage on MCLR with respect to Vss -0.3 9 V 200
Maximum current out of VSS pin 95 mA 200
Maximum current into VDD pin 70 mA 200
Clamp current IK 20 mA VPIN < 0 or VPIN > VDD 200
Maximum output current sunk by any I/O pin 25 mA 200
Maximum output current sourced by any I/O pin 25 mA 200
Maximum current sunk by all ports 200 mA -40°C TA +85°C for industrial 200
Maximum current sourced by all ports 140 mA -40°C TA +85°C for industrial 200
Maximum current sourced by all ports 65 mA -40°C TA +125°C for extended 200
Ambient temperature under bias -40 125 °C 200
Storage temperature -65 150 °C 200
Supply Voltage PIC16LF722/3/4/6/7 VDD 1.8 3.6 V FOSC <= 16 MHz: HFINTOSC, EC 201
Supply Voltage PIC16LF722/3/4/6/7 VDD 2.3 3.6 V FOSC <= 20 MHz, EC 201
Supply Voltage PIC16LF722/3/4/6/7 VDD 2.5 3.6 V FOSC <= 20 MHz, HS 201
RAM Data Retention Voltage VDR 1.5 V Device in Sleep mode 201
Fixed Voltage Reference initial accuracy VFVR -8 6 % VFVR = 1.024V, VDD 2.5V 201
VDD Rise Rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms See Section 3.2 Power-on Reset (POR) for details. 201
LDO Regulator IDD 110 150 µA FOSC = 1 MHz (1.8V) 203
XT Oscillator mode IDD 150 215 µA FOSC = 1 MHz, XT Oscillator mode, 3.0V 203
XT Oscillator mode IDD 230 300 µA FOSC = 4 MHz (1.8V) 203
MFINTOSC mode IDD 100 130 µA FOSC = 500 kHz (1.8V) 204
MFINTOSC mode IDD 120 150 µA FOSC = 500 kHz, MFINTOSC mode, 3.0V 204
HFINTOSC mode IDD 650 800 µA FOSC = 8 MHz (1.8V) 204
HFINTOSC mode IDD 1000 1200 µA FOSC = 8 MHz, HFINTOSC mode, 3.0V 204
HFINTOSC mode IDD 1 1.2 mA FOSC = 16 MHz (1.8V) 204
HFINTOSC mode IDD 1.5 1.85 mA FOSC = 16 MHz, HFINTOSC mode, 3.0V 204
EXTRC mode IDD 210 240 µA FOSC = 4 MHz (1.8V), Note 3, Note 5 204
EXTRC mode IDD 340 380 µA FOSC = 4 MHz, EXTRC mode, 3.0V 204
HS Oscillator mode IDD 1.6 1.9 mA FOSC = 20 MHz, 3.0V 204
HS Oscillator mode IDD 2 2.8 mA FOSC = 20 MHz, HS Oscillator mode, 3.6V 204
Power-down Base Current IPD 0.02 0.7 µA WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive, 1.8V, Max. +85°C column 205
Power-down Base Current IPD 0.02 3.9 µA WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive, 1.8V, Max. +125°C column 205
Power-down Base Current IPD 0.08 1 µA WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive, 3.0V, Max. +85°C column 205
Power-down Base Current IPD 0.08 4.3 µA WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive, 3.0V, Max. +125°C column 205
Input Leakage Current I/O ports IIL -5 5 nA VSS VPIN VDD, Pin at high-impedance, 85°C 207
Input Leakage Current I/O ports IIL -125 125 nA VSS VPIN VDD, Pin at high-impedance, 125°C 207
PORTB Weak Pull-up Current IPUR 25 100 200 µA VDD = 3.3V, VPIN = VSS 207
Output Low Voltage I/O ports VOL 0.6 V IOL = 6mA, VDD = 3.3V 207
Capacitive Loading OSC2 pin COSC2 15 pF In XT, HS and LP modes when external clock is used to drive OSC1 207
Capacitive Loading All I/O pins CIO 50 pF 207
Characteristic Retention TRETD 40 Year Provided no other specifications are violated 208
VDD for Write or Row Erase VPEW 2.7 V VMIN = Minimum operating voltage, VMAX = Maximum operating voltage 208
External CLKIN Frequency LP Oscillator mode FOSC 37 kHz LP Oscillator mode 213
External CLKIN Frequency XT Oscillator mode FOSC 4 MHz XT Oscillator mode 213
External CLKIN Frequency HS Oscillator mode FOSC 20 MHz HS Oscillator mode 213
External CLKIN Frequency EC Oscillator mode FOSC 20 MHz EC Oscillator mode 213
Internal Calibrated HFINTOSC Frequency tolerance HFOSC -2 2 % 0°C TA +85°C, VDD 214
Internal Calibrated HFINTOSC Frequency tolerance HFOSC -5 5 % -40°C TA +125°C 214
HFINTOSC Wake-up from Sleep Start-up Time TIOSC ST 5 8 µs 214
MCLR Pulse Width (low) TMCL 2 µs VDD = 3.3-5V, -40°C to +85°C 217
Low Power Watchdog Timer Time-out Period (No Prescaler) TWDTLP 10 18 27 ms VDD = 3.3V-5V 217
Power-up Timer Period, PWRTE = 0 TPWRT 40 65 140 ms PWRTE = 0 217
I/O high-impedance from MCLR Low or Watchdog Timer Reset TIOZ 2 µs 217
Brown-out Reset Voltage VBOR 2.38 2.5 2.73 V BORV=2.5V 217
Brown-out Reset Voltage VBOR 1.8 1.9 2.11 V BORV=1.9V 217
Brown-out Reset Hysteresis VHYST 0 25 50 mV -40°C to +85°C 217
Integral Error EIL -1.7 1.7 LSb VREF = 3.0V 219
Differential Error EDL -1 1 LSb No missing codes, VREF = 3.0V 219
Offset Error EOFF -2.2 2.2 LSb VREF = 3.0V 219
Gain Error EGN -1.5 1.5 LSb VREF = 3.0V 219
Reference Voltage VREF 1.8 V 219
Recommended Impedance of Analog Voltage Source ZAIN 50 k Can go higher if external 0.01F capacitor is present on input pin. 219
A/D Clock Period TAD 1 9 µs TOSC-based 219
A/D Internal RC Oscillator Period TAD 1 2 6 µs ADCS<1:0> = 11 (ADRC mode) 219
SYNC XMIT Clock high to data-out valid TCKH2DTV 100 ns 1.8-5.5V 221
SYNC RCV Data-hold before CK (DT hold time) TDTV2CKL 10 ns 221
SYNC RCV Data-hold after CK (DT hold time) TCKL2DTL 15 ns 221
Thermal Resistance Junction to Ambient 28-pin SSOP package JA 90 C/W 28-pin SSOP package 209
Thermal Resistance Junction to Case 28-pin SSOP package JC 24 C/W 28-pin SSOP package 209

CAD (KiCad official)

  • Symbol: PIC16LF722-I
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
  • 3D model files: pic16lf722-i-etched.step / pic16lf722-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16lf722-i.step / pic16lf722-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (282 pp, sha256 00bf4f739ca402f9, retrieved 2026-11-09, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF