Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP3304-BI

Microchip Tech · Analog To Digital Converters (ADCs) · SOIC-16

MCP3304-BI from Microchip Tech, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CH0 input Analog input channel 0 with absolute voltage range of VSS - 0.3V to VDD + 0.3V.
2 CH1 input Analog input channel 1 with absolute voltage range of VSS - 0.3V to VDD + 0.3V.
3 CH2 input Analog input channel 2 with absolute voltage range of VSS - 0.3V to VDD + 0.3V.
4 CH3 input Analog input channel 3 with absolute voltage range of VSS - 0.3V to VDD + 0.3V.
5 CH4 input Analog input channel 4 with absolute voltage range of VSS - 0.3V to VDD + 0.3V.
6 CH5 input Analog input channel 5 with absolute voltage range of VSS - 0.3V to VDD + 0.3V.
7 CH6 input Analog input channel 6 with absolute voltage range of VSS - 0.3V to VDD + 0.3V.
8 CH7 input Analog input channel 7 with absolute voltage range of VSS - 0.3V to VDD + 0.3V.
9 DGND power_in Digital ground for internal digital circuitry; must be connected to the same ground as AGND.
10 CS/SHDN input Chip select/shutdown: low initiates communication, high ends a conversion and enters low-power standby; must be pulled high between conversions.
11 DIN input SPI serial data input for channel configuration data, latched on the rising edge of the clock.
12 DOUT output SPI serial data output that shifts out conversion results, changing on the falling edge of each clock.
13 CLK input SPI clock that initiates a conversion and clocks out each bit of the result.
14 AGND power_in Analog ground for internal analog circuitry; must be connected to the same ground as DGND.
15 VREF power_in Reference voltage input (400 mV to 5V) that sets the analog input range and LSB size (2 x VREF / 8192).
16 VDD power_in +4.5V to 5.5V power supply; place a 0.1 µF ceramic bypass capacitor as close as possible to the pin.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-16
Category Data Converters
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Integral Nonlinearity (B grade) INL 0.5 1 LSB MCP3302/04-B 3
Differential Nonlinearity DNL 0.5 1 LSB Monotonic over temperature 3
Positive Gain Error -3 -0.75 2 LSB 3
Negative Gain Error -3 -0.5 2 LSB 3
Offset Error -3 3 6 LSB 3
Maximum Sampling Frequency FSAMPLE 100 ksps See FCLK specification. Note 8 3
Reference Voltage Range 0.4 5.5 V Note 2 (max printed as VDD) 3
Reference Current Drain 100 150 µA 3
Reference Current Drain (CS high) 0.001 3 µA CS = VDD = 5V 3
Analog Input Leakage Current -1 0.001 1 µA 4
High Level Output Voltage VOH 4.1 V IOH = -1 mA, VDD = 4.5V 4
Low Level Output Voltage VOL 0.4 V IOL = 1 mA, VDD = 4.5V 4
Input Leakage Current ILI -10 10 µA VIN = VSS or VDD 4
Output Leakage Current ILO -10 10 µA VOUT = VSS or VDD 4
Pin Capacitance CIN, COUT 10 pF TA = +25°C, F = 1 MHz, Note 1 4
Clock Frequency FCLK 0.105 2.1 MHz VDD = 5V, FSAMPLE = 100 ksps 4
Clock High Time THI 210 ns Note 5 4
Clock Low Time TLO 210 ns Note 5 4
CS Fall To First Rising CLK Edge TSUCS 100 ns 4
Data In Setup time TSU 50 ns 4
Data In Hold Time THD 50 ns 4
CLK Fall To Output Data Valid TDO 125 ns VDD = 5V, see Figure 1-2 4
CLK Fall To Output Data Valid TDO 200 ns VDD = 2.7V, see Figure 1-2 4
CLK Fall To Output Enable TEN 125 ns VDD = 5V, see Figure 1-2 4
CLK Fall To Output Enable TEN 200 ns VDD = 2.7V, see Figure 1-2 4
CS Rise To Output Disable TDIS 100 ns See test circuits, Figure 1-2 Note 1 4
CS Disable Time TCSH 475 ns 4
DOUT Rise Time TR 100 ns See test circuits, Figure 1-2 Note 1 4
DOUT Fall Time TF 100 ns See test circuits, Figure 1-2 Note 1 4
Operating Voltage VDD 4.5 5.5 V Note 9 5
Operating Current IDD 300 450 µA VDD, VREF = 5V, DOUT unloaded 5
Operating Current IDD 200 µA VDD, VREF = 2.7V, DOUT unloaded 5
Standby Current IDDS 0.05 1 µA CS = VDD = 5.0V 5
Supply Voltage VDD 7 V 3
Storage temperature -65 150 °C 3
Ambient temp. with power applied -65 125 °C 3
Maximum Junction Temperature 150 °C 3
ESD protection on all pins (HBM) 4 kV 3
Specified Temperature Range TA -40 125 °C VDD = +2.7V to +5.5V, VSS = GND 5
Operating Temperature Range TA -40 125 °C VDD = +2.7V to +5.5V, VSS = GND 5
Storage Temperature Range TA -65 150 °C 5
Thermal Resistance, 16L-SOIC θJA 86.1 °C/W 5
Total Harmonic Distortion THD -91 dB Note 3 3
Signal-to-Noise and Distortion SINAD 78 dB Note 3 3
Spurious Free Dynamic Range SFDR 92 dB Note 3 3
Common Mode Rejection CMRR 79 dB Note 6 3
Power Supply Rejection PSR 74 dB Note 4 3
Switch Resistance RS 1 kΩ See Figure 5-3 4
Sample Capacitor CSAMPLE 25 pF See Figure 5-3 4

CAD (KiCad official)

  • Symbol: MCP3304-BI
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: mcp3304-bi-etched.step / mcp3304-bi-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp3304-bi.step / mcp3304-bi.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (48 pp, sha256 bd5671e61167c4eb, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF