Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LTC6906CS6#TRPBF

Analog Devices · Timers / Clock Oscillators · TSOT-23-6

LTC6906CS6#TRPBF from Analog Devices, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Oscillator output that swings from GND to V+ through an output resistance of approximately 150Ω; keep the load resistance as high as possible and the load capacitance as low as possible for micropower operation.
2 GND power_in Ground reference pin for the device.
3 DIV input Three-level divider select input: tie to GND for ÷1, leave floating for ÷3, or tie to V+ for ÷10; when floating it is pulled to mid-supply through 2.5MΩ and should be shielded from OUT coupling.
4 SET passive Frequency-setting resistor input: connect RSET (100kΩ to 1MΩ) from this pin to GND, keep capacitance in parallel with RSET below 10pF, and note the SET voltage is approximately 650mV, decreasing about 2.2mV/°C.
5 GRD output Guard signal held within a few millivolts of the SET pin voltage (VGRD relative to VSET limited to ±10mV) to shunt PC board leakage away from SET; route a bare copper trace with no solder mask around SET.
6 V+ power_in Supply voltage input of 2.25V to 3.6V, internally decoupled by a 20Ω resistor in series with an 800pF capacitor, and it should be kept reasonably free of noise and ripple.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TSOT-23-6
Category Clock and Timing
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Frequency Accuracy (LTC6906C), 100kHz ≤ f ≤ 1MHz Δf -0.65 0.65 % V+ = 2.7V to 3.6V, LTC6906C 2
Frequency Accuracy (LTC6906C), 100kHz ≤ f ≤ 1MHz Δf -0.85 0.85 % V+ = 2.25V, LTC6906C 2
Frequency Accuracy, 100kHz ≤ f ≤ 1MHz Δf -0.5 0.25 0.5 % V+ = 2.7V to 3.6V 2
Frequency Accuracy, 100kHz ≤ f ≤ 1MHz Δf -0.7 0.25 0.7 % V+ = 2.25V 2
Frequency-Setting Resistor Range RSET 100 1000 kΩ 3
Frequency Drift Over Temperature Δf/ΔT -0.005 0.005 %/°C RSET = 316k 3
Frequency Drift Over Supply Δf/ΔV 0.06 %/V V+ = 2.25V to 3.6V, 100k ≤ RSET ≤ 1000k 3
Timing Jitter 0.03 % Pin 3 = V+, 100k ≤ RSET ≤ 1000k 3
Timing Jitter 0.07 % Pin 3 = Open, 100k ≤ RSET ≤ 1000k 3
Timing Jitter 0.15 % Pin 3 = 0V, 100k ≤ RSET ≤ 1000k 3
Long-Term Stability of Output Frequency Sf 300 ppm/√kHr Pin 3 = V+ 3
DC Duty Cycle 45 50 55 % 3
V+ Operating Supply Range V+ 2.25 3.6 V 3
Power Supply Current (DIV=1, fOUT=100kHz) IS 12.5 18 μA RSET = 1000k, Pin 3 = 0V, RL = 10M, V+ = 3.6V 3
Power Supply Current (DIV=1, fOUT=100kHz) IS 10 15 μA RSET = 1000k, Pin 3 = 0V, RL = 10M, V+ = 2.25V 3
Power Supply Current (DIV=1, fOUT=1MHz) IS 78 100 μA RSET = 100k, Pin 3 = 0V, RL = 10M, V+ = 3.6V 3
Power Supply Current (DIV=1, fOUT=1MHz) IS 60 80 μA RSET = 100k, Pin 3 = 0V, RL = 10M, V+ = 2.25V 3
High Level DIV Input Voltage VIH 3.1 V V+ = 3.6V 3
High Level DIV Input Voltage VIH 2.05 V V+ = 2.25V 3
Low Level DIV Input Voltage VIL 0.5 V V+ = 3.6V 3
Low Level DIV Input Voltage VIL 0.2 V V+ = 2.25V 3
DIV Input Current IDIV -2 -1 μA Pin 3 = V+ 3
DIV Input Current IDIV 1 2 μA Pin 3 = 0V 3
High Level Output Voltage VOH 3.4 3.59 V V+ = 3.6V, IOH = -100μA 3
High Level Output Voltage VOH 2.8 3.3 V V+ = 3.6V, IOH = -1mA 3
High Level Output Voltage VOH 2.15 2.2 V V+ = 2.25V, IOH = -100μA 3
High Level Output Voltage VOH 1.75 2 V V+ = 2.25V, IOH = -1mA 3
Low Level Output Voltage VOL 0.02 0.2 V V+ = 3.6V, IOL = 100μA 3
Low Level Output Voltage VOL 0.15 0.8 V V+ = 3.6V, IOL = 1mA 3
Low Level Output Voltage VOL 0.03 0.1 V V+ = 2.25V, IOL = 100μA 3
Low Level Output Voltage VOL 0.3 0.5 V V+ = 2.25V, IOL = 1mA 3
OUT Rise Time tr 10 ns V+ = 3.6V 3
OUT Rise Time tr 25 ns V+ = 2.25V 3
OUT Fall Time tf 10 ns V+ = 3.6V 3
OUT Fall Time tf 25 ns V+ = 2.25V 3
GRD Pin Voltage Relative to SET Pin Voltage VGS -10 10 mV -10μA ≤ IGRD ≤ 0.3μA 3
V+ Absolute Maximum Supply Voltage V+ -0.3 6 V 2
DIV to GND Voltage DIV -0.3 V Max is V+ + 0.3V 2
SET to GND Voltage SET -0.3 V Max is V+ + 0.3V 2
GRD to GND Voltage GRD -0.3 V Max is V+ + 0.3V 2
Operating Temperature Range (LTC6906C) TA -40 85 °C 2
Specified Temperature Range (LTC6906C) TA 0 70 °C Guaranteed performance range 2
Storage Temperature Range TSTG -65 150 °C 2
Lead Temperature (Soldering) 300 °C 10 sec 2
Maximum Junction Temperature TJMAX 150 °C 2
Thermal Resistance, Junction to Ambient θJA 230 °C/W S6 package 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper SET pin and shunts leakage current away from the SET pin. To control leakage, connect a bare copper trace (a trace 5

CAD (KiCad official)

  • Symbol: LTC6906CS6#TRPBF
  • Footprint: Package_TO_SOT_SMD:TSOT-23-6
  • 3D model: TSOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: ltc6906cs6-trpbf-etched.step / ltc6906cs6-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc6906cs6-trpbf.step / ltc6906cs6-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (14 pp, sha256 d1e1306fa93b14c0, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF