3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM32F429VET6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)
STM32F429VET6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V-tolerant (FT) I/O port E pin 2 with alternate functions TRACECLK, SPI4_SCK, SAI1_MCLK_A, ETH_MII_TXD3, FMC_A23 and EVENTOUT. |
| 2 | PE3 | bidirectional | 5 V-tolerant (FT) I/O port E pin 3 with alternate functions TRACED0, SAI1_SD_B, FMC_A19 and EVENTOUT. |
| 3 | PE4 | bidirectional | 5 V-tolerant (FT) I/O port E pin 4 with alternate functions TRACED1, SPI4_NSS, SAI1_FS_A, FMC_A20, DCMI_D4, LCD_B0 and EVENTOUT. |
| 4 | PE5 | bidirectional | 5 V-tolerant (FT) I/O port E pin 5 with alternate functions TRACED2, TIM9_CH1, SPI4_MISO, SAI1_SCK_A, FMC_A21, DCMI_D6, LCD_G0 and EVENTOUT. |
| 5 | PE6 | bidirectional | 5 V-tolerant (FT) I/O port E pin 6 with alternate functions TRACED3, TIM9_CH2, SPI4_MOSI, SAI1_SD_A, FMC_A22, DCMI_D7, LCD_G1 and EVENTOUT. |
| 6 | VBAT | power_in | Backup supply (1.65 to 3.6 V) for the RTC, 32 kHz oscillator, backup registers and backup SRAM when VDD is absent. |
| 7 | PC13 | bidirectional | FT I/O powered through the backup power switch (output limited to 3 mA, max 2 MHz with 30 pF load, cannot source LEDs); function EVENTOUT, other function TAMP_1. |
| 8 | PC14-OSC32_IN | bidirectional | FT I/O (PC14) or 32 kHz LSE oscillator input (OSC32_IN), powered by the backup switch with a 3 mA, 2 MHz, 30 pF output limit. |
| 9 | PC15-OSC32_OUT | bidirectional | FT I/O (PC15) or 32 kHz LSE oscillator output (OSC32_OUT), powered by the backup switch with a 3 mA, 2 MHz, 30 pF output limit. |
| 10 | VSS | power_in | Digital ground supply pin; all VSS pins must be connected to external ground. |
| 11 | VDD | power_in | Digital supply pin, 1.7 to 3.6 V, for I/O and the internal regulator. |
| 12 | PH0-OSC_IN | bidirectional | FT I/O (PH0) or HSE 4-26 MHz oscillator input (OSC_IN) with EVENTOUT alternate function. |
| 13 | PH1-OSC_OUT | bidirectional | FT I/O (PH1) or HSE 4-26 MHz oscillator output (OSC_OUT) with EVENTOUT alternate function. |
| 14 | NRST | bidirectional | Bidirectional reset pin with weak pull-up (30 to 50 kΩ), input filters pulses up to 100 ns, and generates a reset pulse of at least 20 µs from internal sources. |
| 15 | PC0 | bidirectional | FT I/O port C pin 0 with OTG_HS_ULPI_STP, FMC_SDNWE, EVENTOUT and analog input ADC123_IN10. |
| 16 | PC1 | bidirectional | FT I/O port C pin 1 with ETH_MDC, EVENTOUT and analog input ADC123_IN11. |
| 17 | PC2 | bidirectional | FT I/O port C pin 2 with SPI2_MISO, I2S2ext_SD, OTG_HS_ULPI_DIR, ETH_MII_TXD2, FMC_SDNE0, EVENTOUT and analog input ADC123_IN12. |
| 18 | PC3 | bidirectional | FT I/O port C pin 3 with SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, FMC_SDCKE0, EVENTOUT and analog input ADC123_IN13. |
| 19 | VDD | power_in | Digital supply pin, 1.7 to 3.6 V. |
| 20 | VSSA | power_in | Analog ground for ADC, DAC, reset block, RC and PLL; must be connected to VSS. |
| 21 | VREF+ | power_in | ADC/DAC positive reference voltage, 1.7 to 3.6 V, with VDDA - VREF+ < 1.2 V. |
| 22 | VDDA | power_in | Analog supply for ADC, DAC, reset block, RC and PLL, 1.7 to 3.6 V (2.4 to 3.6 V for 2.4 Msps ADC), must equal VDD. |
| 23 | PA0-WKUP | bidirectional | FT I/O port A pin 0 with TIM2_CH1/ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, ETH_MII_CRS, ADC123_IN0 and WKUP wake-up from Standby. |
| 24 | PA1 | bidirectional | FT I/O port A pin 1 with TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, ETH_MII_RX_CLK/RMII_REF_CLK and analog input ADC123_IN1. |
| 25 | PA2 | bidirectional | FT I/O port A pin 2 with TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, ETH_MDIO and analog input ADC123_IN2. |
| 26 | PA3 | bidirectional | FT I/O port A pin 3 with TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, OTG_HS_ULPI_D0, ETH_MII_COL, LCD_B5 and analog input ADC123_IN3. |
| 27 | VSS | power_in | Digital ground supply pin. |
| 28 | VDD | power_in | Digital supply pin, 1.7 to 3.6 V. |
| 29 | PA4 | bidirectional | 3.3 V-tolerant TTa I/O connected to ADC with SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, OTG_HS_SOF, DCMI_HSYNC, LCD_VSYNC, ADC12_IN4 and DAC_OUT1. |
| 30 | PA5 | bidirectional | 3.3 V-tolerant TTa I/O connected to ADC with TIM2_CH1/ETR, TIM8_CH1N, SPI1_SCK, OTG_HS_ULPI_CK, ADC12_IN5 and DAC_OUT2. |
| 31 | PA6 | bidirectional | FT I/O port A pin 6 with TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM13_CH1, DCMI_PIXCLK, LCD_G2 and analog input ADC12_IN6. |
| 32 | PA7 | bidirectional | FT I/O port A pin 7 with TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, TIM14_CH1, ETH_MII_RX_DV/RMII_CRS_DV and analog input ADC12_IN7. |
| 33 | PC4 | bidirectional | FT I/O port C pin 4 with ETH_MII_RXD0/RMII_RXD0, EVENTOUT and analog input ADC12_IN14. |
| 34 | PC5 | bidirectional | FT I/O port C pin 5 with ETH_MII_RXD1/RMII_RXD1, EVENTOUT and analog input ADC12_IN15. |
| 35 | PB0 | bidirectional | FT I/O port B pin 0 with TIM1_CH2N, TIM3_CH3, TIM8_CH2N, LCD_R3, OTG_HS_ULPI_D1, ETH_MII_RXD2 and analog input ADC12_IN8. |
| 36 | PB1 | bidirectional | FT I/O port B pin 1 with TIM1_CH3N, TIM3_CH4, TIM8_CH3N, LCD_R6, OTG_HS_ULPI_D2, ETH_MII_RXD3 and analog input ADC12_IN9. |
| 37 | PB2-BOOT1 | bidirectional | FT I/O port B pin 2 that serves as BOOT1 boot mode selection, with EVENTOUT alternate function. |
| 38 | PE7 | bidirectional | FT I/O port E pin 7 with TIM1_ETR, UART7_Rx, FMC_D4 and EVENTOUT. |
| 39 | PE8 | bidirectional | FT I/O port E pin 8 with TIM1_CH1N, UART7_Tx, FMC_D5 and EVENTOUT. |
| 40 | PE9 | bidirectional | FT I/O port E pin 9 with TIM1_CH1, FMC_D6 and EVENTOUT. |
| 41 | PE10 | bidirectional | FT I/O port E pin 10 with TIM1_CH2N, FMC_D7 and EVENTOUT. |
| 42 | PE11 | bidirectional | FT I/O port E pin 11 with TIM1_CH2, SPI4_NSS, FMC_D8, LCD_G3 and EVENTOUT. |
| 43 | PE12 | bidirectional | FT I/O port E pin 12 with TIM1_CH3N, SPI4_SCK, FMC_D9, LCD_B4 and EVENTOUT. |
| 44 | PE13 | bidirectional | FT I/O port E pin 13 with TIM1_CH3, SPI4_MISO, FMC_D10, LCD_DE and EVENTOUT. |
| 45 | PE14 | bidirectional | FT I/O port E pin 14 with TIM1_CH4, SPI4_MOSI, FMC_D11, LCD_CLK and EVENTOUT. |
| 46 | PE15 | bidirectional | FT I/O port E pin 15 with TIM1_BKIN, FMC_D12, LCD_R7 and EVENTOUT. |
| 47 | PB10 | bidirectional | FT I/O port B pin 10 with TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, LCD_G4 and EVENTOUT. |
| 48 | PB11 | bidirectional | FT I/O port B pin 11 with TIM2_CH4, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN/RMII_TX_EN, LCD_G5 and EVENTOUT. |
| 49 | VCAP_1 | passive | Internal 1.2 V regulator output connection requiring a 2.2 µF ceramic capacitor with ESR below 2 Ω to ground. |
| 50 | VDD | power_in | Digital supply pin, 1.7 to 3.6 V. |
| 51 | PB12 | bidirectional | FT I/O port B pin 12 with TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, CAN2_RX, OTG_HS_ULPI_D5, ETH_MII_TXD0/RMII_TXD0, OTG_HS_ID and EVENTOUT. |
| 52 | PB13 | bidirectional | FT I/O port B pin 13 with TIM1_CH1N, SPI2_SCK/I2S2_CK, USART3_CTS, CAN2_TX, OTG_HS_ULPI_D6, ETH_MII_TXD1/RMII_TXD1 and OTG_HS_VBUS. |
| 53 | PB14 | bidirectional | FT I/O port B pin 14 with TIM1_CH2N, TIM8_CH2N, SPI2_MISO, I2S2ext_SD, USART3_RTS, TIM12_CH1 and OTG_HS_DM. |
| 54 | PB15 | bidirectional | FT I/O port B pin 15 with RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI/I2S2_SD, TIM12_CH2 and OTG_HS_DP. |
| 55 | PD8 | bidirectional | FT I/O port D pin 8 with USART3_TX, FMC_D13 and EVENTOUT. |
| 56 | PD9 | bidirectional | FT I/O port D pin 9 with USART3_RX, FMC_D14 and EVENTOUT. |
| 57 | PD10 | bidirectional | FT I/O port D pin 10 with USART3_CK, FMC_D15, LCD_B3 and EVENTOUT. |
| 58 | PD11 | bidirectional | FT I/O port D pin 11 with USART3_CTS, FMC_A16 and EVENTOUT. |
| 59 | PD12 | bidirectional | FT I/O port D pin 12 with TIM4_CH1, USART3_RTS, FMC_A17 and EVENTOUT. |
| 60 | PD13 | bidirectional | FT I/O port D pin 13 with TIM4_CH2, FMC_A18 and EVENTOUT. |
| 61 | PD14 | bidirectional | FT I/O port D pin 14 with TIM4_CH3, FMC_D0 and EVENTOUT. |
| 62 | PD15 | bidirectional | FT I/O port D pin 15 with TIM4_CH4, FMC_D1 and EVENTOUT. |
| 63 | PC6 | bidirectional | FT I/O port C pin 6 with TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, SDIO_D6, DCMI_D0, LCD_HSYNC and EVENTOUT. |
| 64 | PC7 | bidirectional | FT I/O port C pin 7 with TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, SDIO_D7, DCMI_D1, LCD_G6 and EVENTOUT. |
| 65 | PC8 | bidirectional | FT I/O port C pin 8 with TIM3_CH3, TIM8_CH3, USART6_CK, SDIO_D0, DCMI_D2 and EVENTOUT. |
| 66 | PC9 | bidirectional | FT I/O port C pin 9 with MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, SDIO_D1, DCMI_D3 and EVENTOUT. |
| 67 | PA8 | bidirectional | FT I/O port A pin 8 with MCO1, TIM1_CH1, I2C3_SCL, USART1_CK, OTG_FS_SOF, LCD_R6 and EVENTOUT. |
| 68 | PA9 | bidirectional | FT I/O port A pin 9 with TIM1_CH2, I2C3_SMBA, USART1_TX, DCMI_D0, EVENTOUT and OTG_FS_VBUS. |
| 69 | PA10 | bidirectional | FT I/O port A pin 10 with TIM1_CH3, USART1_RX, OTG_FS_ID, DCMI_D1 and EVENTOUT. |
| 70 | PA11 | bidirectional | FT I/O port A pin 11 with TIM1_CH4, USART1_CTS, CAN1_RX, LCD_R4, OTG_FS_DM and EVENTOUT. |
| 71 | PA12 | bidirectional | FT I/O port A pin 12 with TIM1_ETR, USART1_RTS, CAN1_TX, LCD_R5, OTG_FS_DP and EVENTOUT. |
| 72 | PA13 (JTMS-SWDIO) | bidirectional | FT I/O that is JTMS-SWDIO debug pin after reset, with EVENTOUT alternate function. |
| 73 | VCAP_2 | passive | Internal 1.2 V regulator output connection requiring a 2.2 µF ceramic capacitor with ESR below 2 Ω to ground. |
| 74 | VSS | power_in | Digital ground supply pin. |
| 75 | VDD | power_in | Digital supply pin, 1.7 to 3.6 V. |
| 76 | PA14 (JTCK-SWCLK) | bidirectional | FT I/O that is JTCK-SWCLK debug pin after reset, with EVENTOUT alternate function. |
| 77 | PA15 (JTDI) | bidirectional | FT I/O that is JTDI after reset, with TIM2_CH1/ETR, SPI1_NSS, SPI3_NSS/I2S3_WS and EVENTOUT. |
| 78 | PC10 | bidirectional | FT I/O port C pin 10 with SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, SDIO_D2, DCMI_D8, LCD_R2 and EVENTOUT. |
| 79 | PC11 | bidirectional | FT I/O port C pin 11 with I2S3ext_SD, SPI3_MISO, USART3_RX, UART4_RX, SDIO_D3, DCMI_D4 and EVENTOUT. |
| 80 | PC12 | bidirectional | FT I/O port C pin 12 with SPI3_MOSI/I2S3_SD, USART3_CK, UART5_TX, SDIO_CK, DCMI_D9 and EVENTOUT. |
| 81 | PD0 | bidirectional | FT I/O port D pin 0 with CAN1_RX, FMC_D2 and EVENTOUT. |
| 82 | PD1 | bidirectional | FT I/O port D pin 1 with CAN1_TX, FMC_D3 and EVENTOUT. |
| 83 | PD2 | bidirectional | FT I/O port D pin 2 with TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11 and EVENTOUT. |
| 84 | PD3 | bidirectional | FT I/O port D pin 3 with SPI2_SCK/I2S2_CK, USART2_CTS, FMC_CLK, DCMI_D5, LCD_G7 and EVENTOUT. |
| 85 | PD4 | bidirectional | FT I/O port D pin 4 with USART2_RTS, FMC_NOE and EVENTOUT. |
| 86 | PD5 | bidirectional | FT I/O port D pin 5 with USART2_TX, FMC_NWE and EVENTOUT. |
| 87 | PD6 | bidirectional | FT I/O port D pin 6 with SPI3_MOSI/I2S3_SD, SAI1_SD_A, USART2_RX, FMC_NWAIT, DCMI_D10, LCD_B2 and EVENTOUT. |
| 88 | PD7 | bidirectional | FT I/O port D pin 7 with USART2_CK, FMC_NE1/FMC_NCE2 and EVENTOUT. |
| 89 | PB3 (JTDO/TRACESWO) | bidirectional | FT I/O that is JTDO/TRACESWO after reset, with TIM2_CH2, SPI1_SCK, SPI3_SCK/I2S3_CK and EVENTOUT. |
| 90 | PB4 (NJTRST) | bidirectional | FT I/O that is NJTRST after reset, with TIM3_CH1, SPI1_MISO, SPI3_MISO, I2S3ext_SD and EVENTOUT. |
| 91 | PB5 | bidirectional | FT I/O port B pin 5 with TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI/I2S3_SD, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, FMC_SDCKE1, DCMI_D10 and EVENTOUT. |
| 92 | PB6 | bidirectional | FT I/O port B pin 6 with TIM4_CH1, I2C1_SCL, USART1_TX, CAN2_TX, FMC_SDNE1, DCMI_D5 and EVENTOUT. |
| 93 | PB7 | bidirectional | FT I/O port B pin 7 with TIM4_CH2, I2C1_SDA, USART1_RX, FMC_NL, DCMI_VSYNC and EVENTOUT. |
| 94 | BOOT0 | input | Dedicated boot mode selection pin that tolerates up to 9 V input; also VPP for Flash programming (7 to 9 V). |
| 95 | PB8 | bidirectional | FT I/O port B pin 8 with TIM4_CH3, TIM10_CH1, I2C1_SCL, CAN1_RX, ETH_MII_TXD3, SDIO_D4, DCMI_D6, LCD_B6 and EVENTOUT. |
| 96 | PB9 | bidirectional | FT I/O port B pin 9 with TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, CAN1_TX, SDIO_D5, DCMI_D7, LCD_B7 and EVENTOUT. |
| 97 | PE0 | bidirectional | FT I/O port E pin 0 with TIM4_ETR, UART8_RX, FMC_NBL0, DCMI_D2 and EVENTOUT. |
| 98 | PE1 | bidirectional | FT I/O port E pin 1 with UART8_Tx, FMC_NBL1, DCMI_D3 and EVENTOUT. |
| 99 | VSS | power_in | Digital ground supply pin. |
| 100 | VDD | power_in | Digital supply pin, 1.7 to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Standard operating voltage | VDD | 1.7 | 3.6 | V | Standard operating voltage | 94 | |
| Analog operating voltage, ADC limited to 1.2 Msps | VDDA | 1.7 | 2.4 | V | ADC limited to 1.2 Msps; must be equipotential with VDD | 94 | |
| Analog operating voltage, ADC limited to 2.4 Msps | VDDA | 2.4 | 3.6 | V | ADC limited to 2.4 Msps | 94 | |
| Backup operating voltage | VBAT | 1.65 | 3.6 | V | Backup operating voltage | 94 | |
| Input voltage on FT and RST pins | VIN | -0.3 | 5.5 | V | 2 V ≤ VDD ≤ 3.6 V | 94 | |
| Input voltage on BOOT0 pin | VIN | 0 | 9 | V | BOOT0 pin | 94 | |
| Ambient temperature, suffix 6, maximum power dissipation | TA | -40 | 85 | °C | Suffix 6 version, maximum power dissipation | 94 | |
| Ambient temperature, suffix 6, low power dissipation | TA | -40 | 105 | °C | Suffix 6 version, low power dissipation | 94 | |
| Junction temperature range, suffix 6 | TJ | -40 | 105 | °C | Suffix 6 version | 95 | |
| Supply voltage VDD-VSS (external) | VDD-VSS | -0.3 | 4 | V | External main supply voltage including VDDA, VDD and VBAT | 91 | |
| Input voltage on BOOT0 pin (absolute) | VIN | 0 | 9 | V | BOOT0 pin | 91 | |
| Voltage variation between different VDD pins | ΔVDDx | 50 | mV | Between different VDD power pins | 91 | ||
| Total current into all VDD_x supply lines | ΣIVDD | 270 | mA | Source current, all VDD_x lines | 92 | ||
| Current into each VDD_x supply line | IVDD | 100 | mA | Source current, each VDD_x line | 92 | ||
| Output sink/source current, any I/O and control pin | IIO | -25 | 25 | mA | Any I/O and control pin, sink (+) and source (-) | 92 | |
| Total output current, all I/O and control pins | ΣIIO | -120 | 120 | mA | All I/O and control pins, sink and source | 92 | |
| Storage temperature range | TSTG | -65 | 150 | °C | Storage temperature range | 92 | |
| Maximum junction temperature | TJ | 125 | °C | Maximum junction temperature | 92 | ||
| Internal regulator output voltage, regulator ON, scale 3 | V12 | 1.08 | 1.14 | 1.2 | V | Regulator ON, power scale 3 (VOS=0x01), 120 MHz HCLK max | 94 |
| HSE oscillator frequency | fOSC_IN | 4 | 26 | MHz | Crystal/ceramic resonator oscillator | 118 | |
| HSI factory calibration accuracy, TA -40 to 105 °C | ACCHSI | -8 | 4.5 | % | Factory calibrated, TA = -40 to 105 °C | 120 | |
| HSI factory calibration accuracy, TA 25 °C | ACCHSI | -1 | 1 | % | Factory calibrated, TA = 25 °C | 120 | |
| HSI frequency | fHSI | 16 | MHz | 120 | |||
| LSI frequency | fLSI | 17 | 32 | 47 | kHz | Characterized, not production tested | 120 |
| POR/PDR reset threshold, falling edge | VPOR/PDR | 1.6 | 1.68 | 1.76 | V | Falling edge | 97 |
| Internal reference voltage | VREFINT | 1.18 | 1.21 | 1.24 | V | -40 °C < TA < +105 °C | 159 |
| Temperature sensor linearity | TL | -2 | 2 | °C | VSENSE linearity versus temperature (±1 typ) | 159 | |
| Temperature sensor average slope | Avg_Slope | 2.5 | mV/°C | 159 | |||
| NRST weak pull-up equivalent resistor | RPU | 30 | 40 | 50 | kΩ | VIN = VSS | 136 |
| Output low level, CMOS port | VOL | 0.4 | V | IIO = +8 mA, 2.7 V ≤ VDD ≤ 3.6 V | 134 | ||
| Flash endurance | NEND | 10 | kcycles | TA = -40 to +85 °C (suffix 6) | 128 | ||
| Flash data retention at 85 °C | tRET | 30 | years | TA = 85 °C after 1000 erase/write cycles | 128 |
CAD (KiCad official)
- Symbol:
STM32F429VET6 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
stm32f429vet6-etched.step/stm32f429vet6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f429vet6.step/stm32f429vet6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (226 pp, sha256
9eccb942b0df757c, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).