3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM2903ATH-13
Diodes Incorporated · Comparators · TSSOP-8
LM2903ATH-13 from Diodes Incorporated, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Channel 1 output, the uncommitted collector of a grounded-emitter NPN output transistor that needs an external pull-up resistor; the output sink current is limited to about 16mA maximum (absolute maximum output current 20mA). |
| 2 | 1IN- | input | Channel 1 inverting input; the input common-mode voltage must not go below -0.3V (at +25°C) and the input can go to +36V without damage. |
| 3 | 1IN+ | input | Channel 1 non-inverting input; the common-mode input voltage range is 0 to VCC - 1.5V at +25°C, and the input can go to +36V without damage. |
| 4 | GND | power_in | Ground, the 0V reference for the supply and inputs; the common-mode input range includes ground. |
| 5 | 2IN+ | input | Channel 2 non-inverting input; the common-mode input voltage range is 0 to VCC - 1.5V at +25°C, and the input can go to +36V without damage. |
| 6 | 2IN- | input | Channel 2 inverting input; the input common-mode voltage must not go below -0.3V (at +25°C) and the input can go to +36V without damage. |
| 7 | 2OUT | output | Channel 2 output, the uncommitted collector of a grounded-emitter NPN output transistor that needs an external pull-up resistor; the output sink current is limited to about 16mA maximum (absolute maximum output current 20mA). |
| 8 | VCC | power_in | Chip supply voltage; single supply 2V to 36V or dual supplies ±1.0V to ±18V, with an absolute maximum supply voltage of 36V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (A-suffix device, TA = +25°C) | VIO | 1 | 2 | mV | VIC = VCMR Min, VO = 1.4V, VCC = 5V to 30V (Note 10); TA = +25°C | 5 | |
| Input Offset Voltage (A-suffix device, Full Range) | VIO | 4 | mV | VIC = VCMR Min, VO = 1.4V, VCC = 5V to 30V (Note 10); Full Range | 5 | ||
| Input Bias Current | IB | 25 | 250 | nA | IIN+ or IIN− with OUT in Linear Range, VCM = 0V (Note 11); TA = +25°C | 5 | |
| Input Bias Current (Full Range) | IB | 500 | nA | IIN+ or IIN− with OUT in Linear Range, VCM = 0V (Note 11); Full Range | 5 | ||
| Input Offset Current | IIO | 5 | 50 | nA | IIN+ - IIN−, VCM = 0V; TA = +25°C | 5 | |
| Input Offset Current (Full Range) | IIO | 200 | nA | IIN+ - IIN−, VCM = 0V; Full Range | 5 | ||
| Input Common-Mode Voltage Range (lower limit) | VCMR | 0 | V | VCC = 30V (Note 12); TA = +25°C; upper limit printed as VCC -1.5 V | 5 | ||
| Input Common-Mode Voltage Range (lower limit, Full Range) | VCMR | 0 | V | VCC = 30V (Note 12); Full Range; upper limit printed as VCC -2 V | 5 | ||
| Supply Current (both channels, RL = ∞) | ICC | 0.7 | 1.7 | mA | RL = ∞ on Both Channels, VCC = 30V; TA = +25°C | 5 | |
| Supply Current (both channels, RL = ∞, Full Range) | ICC | 3 | mA | RL = ∞ on Both Channels, VCC = 30V; Full Range | 5 | ||
| Supply Current (both channels, RL = ∞) | ICC | 0.6 | 1 | mA | RL = ∞ on Both Channels, VCC = 5V; TA = +25°C | 5 | |
| Supply Current (both channels, RL = ∞, Full Range) | ICC | 2 | mA | RL = ∞ on Both Channels, VCC = 5V; Full Range | 5 | ||
| Voltage Gain | AV | 50 | 200 | V/mV | VCC = 15V, VOUT = 1V to 11V, RL ≥ 15kΩ, TA = +25°C | 5 | |
| Output Sink Current | IO(SINK) | 6 | 16 | mA | VIN− = 1V, VIN+ = 0, VO ≤ 1.5V; TA = +25°C | 5 | |
| Saturation Voltage (A-suffix device) | VSAT | 200 | 400 | mV | VIN− = 1V, VIN+ = 0, ISINK ≤ 4mA; TA = +25°C | 5 | |
| Saturation Voltage (Full Range) | VSAT | 700 | mV | VIN− = 1V, VIN+ = 0, ISINK ≤ 4mA; Full Range | 5 | ||
| Output Leakage Current (Full Range) | IO(LEAK) | 1 | µA | VIN− = 0V, VIN+ = 1, VO = 30V; Full Range | 5 | ||
| Differential Input Voltage | VID | 36 | V | All VIN ≥0V (or V- if used) (Note 14); Full Range | 5 | ||
| Supply Voltage | VCC | 36 | V | 3 | |||
| Differential Input Voltage | VID | 36 | V | 3 | |||
| Input Voltage | VIN | -0.3 | 36 | V | 3 | ||
| Input Current | IIN | 50 | mA | VIN < -0.3V | 3 | ||
| Output Voltage | VO | 36 | V | 3 | |||
| Output Current | IO | 20 | mA | 3 | |||
| Operating Junction Temperature | TJ | 150 | °C | 3 | |||
| Storage Temperature Range | TST | -65 | 150 | °C | 3 | ||
| Lead Temperature (Soldering, 10 seconds) | TLEAD | 260 | °C | 10 seconds | 3 | ||
| ESD Human Body Model | ESD HBM | 500 | V | Human body model, 1.5kΩ in series with 100pF (Note 7) | 3 | ||
| ESD Machine Model | ESD MM | 100 | V | Machine model | 3 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | Listed as TA Operating Temperature Range | 3 | |
| Single Supply Voltage Range | VCC | 2 | 36 | V | Single supply (Features list); dual supplies ±1.0V to ±18V also stated | 1 | |
| Package Thermal Impedance, junction to ambient (TSSOP-8) | θJA | 185 | °C/W | TSSOP-8 (Note 6) | 3 | ||
| Package Thermal Impedance, junction to case (TSSOP-8) | θJC | 17 | °C/W | TSSOP-8 (Note 6) | 3 |
CAD (KiCad official)
- Symbol:
LM2903ATH-13 - Footprint:
Package_SO:TSSOP-8_4.4x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm2903ath-13-etched.step/lm2903ath-13-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2903ath-13.step/lm2903ath-13.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (18 pp, sha256
f35cbe124936ddf3, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).