3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXC6901D251MR-G
Torex Semicon · Linear Voltage Regulators (LDO) · SOT-25
XC6901D251MR-G from Torex Semicon, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the regulator, connected to GND (0V) for the negative output stage. |
| 2 | -VIN | power_in | Negative supply input; the datasheet specifies an input voltage range of -2.4V to -12.4V (VCE=3.6V). |
| 3 | CE | input | ON/OFF control, active high: the CE High Level Voltage is +1.2V to +3.6V and the CE Low Level Voltage is GND to 0.4V, with the regulator in stand-by when low or open. |
| 4 | NC | unconnected | No connection. |
| 5 | -VOUT | power_out | Negative regulated output with an output voltage range of -0.9V to -12.0V and a maximum output current of 200mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-25 |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage accuracy (VOUT(E) multiplier, VOUT(T)<-2.0V) | VOUT(E) | 0.985 | 1.015 | ×VOUT(T) | VOUT(T)<-2.0V, IOUT=20mA | 6 | |
| Maximum Output Current | IOUTMAX | 200 | mA | VIN=VOUT(T)-2.0V, VOUT(T)≤-2.4V | 6 | ||
| Load Regulation | ΔVOUT | 20 | 60 | mV | VIN=-4.0V, VOUT(T)>-3.0V, 1mA≤IOUT≤100mA | 6 | |
| Dropout Voltage (E-1 chart at -2.50V) | Vdif | 129 | 174 | mV | IOUT=20mA | 6 | |
| Supply Current | IBIAS | 100 | 200 | μA | VIN=-14.5V, VCE=1.5V, IOUT=0mA | 6 | |
| Stand-by Current | ISTB | 0.01 | 0.1 | μA | VIN=-14.5V, VCE=0V, IOUT=0mA | 6 | |
| Input Line Regulation | ΔVOUT/(ΔVIN・VOUT) | 0.01 | 0.2 | %/V | -14.5V~VOUT(T)-1V, VOUT(T)≤-1.4V, IOUT=20mA | 6 | |
| Input Voltage | VIN | -2.4 | V | 6 | |||
| Output Voltage Temperature Characteristics | ΔVOUT/(ΔTopr・VOUT) | -50 | 50 | ppm/℃ | IOUT=20mA, -40℃≦Topr≦85℃ | 6 | |
| Power Supply Rejection Ratio | PSRR | 45 | dB | VIN={VOUT(T)-1.0}+0.5Vp-pAC, IOUT=20mA, f=1kHz | 6 | ||
| Limit Current | ILIM | 210 | 300 | mA | VIN=VOUT(T)-2.0V, VOUT(T)≤-2.4V | 6 | |
| Short-Circuit Current | ISHORT | 80 | mA | VIN=VOUT(T)-2.0V, Short -VOUT to GND level | 6 | ||
| Detect Thermal Shutdown Temperature | TTSD | 150 | ℃ | IC Junction temperature | 6 | ||
| Release Thermal Shutdown Temperature | TTSR | 125 | ℃ | IC Junction temperature | 6 | ||
| Hysteresis Width | THYS | 25 | ℃ | TTSD-TTSR | 6 | ||
| CE High Level Voltage | VCEH | 1.2 | 3.6 | V | 6 | ||
| CE Low Level Voltage | VCEL | 0.4 | V | 6 | |||
| CE High Level Current | ICEH | 1.8 | 4 | 7 | μA | VIN=-12.4V, VCE=3.6V | 6 |
| CE Low Level Current | ICEL | -0.1 | 0.1 | μA | VCE=GND | 6 | |
| CL Discharge Resistor | RDCHG | 0.7 | 1.2 | 1.8 | kΩ | VIN=-8V, VOUT=-2V, VCE=GND | 6 |
| Soft Start Time | tSS | 0.15 | 0.4 | 1.2 | ms | VOUT(T)>-4.0V, RL=3kΩ, rise time CE=H to 95% of VOUT(E) | 6 |
| Output Current (absolute maximum) | IOUT | 500 | mA | GND=0V, Ta=25℃ | 4 | ||
| Power Dissipation SOT-25 | Pd | 250 | mW | GND=0V, Ta=25℃, SOT-25 | 4 | ||
| Operating Ambient Temperature | Topr | -40 | 85 | ℃ | 4 | ||
| Storage Temperature | Tstg | -55 | 125 | ℃ | 4 | ||
| Thermal Resistance SOT-25 | 166.67 | ℃/W | Board mount, Tj max=125℃ | 24 |
CAD (KiCad official)
- Symbol:
XC6901D251MR-G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files:
xc6901d251mr-g-etched.step/xc6901d251mr-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc6901d251mr-g.step/xc6901d251mr-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Torex Semicon datasheet (28 pp, sha256
66e95ece943c7233, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).