3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSN74HCS240DGSR
Texas Instruments · Buffers, Drivers, Receivers, Transceivers · VSSOP-20
SN74HCS240DGSR from Texas Instruments, in a VSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OE | input | Bank 1 output enable, active low; a high level puts the Bank 1 outputs in hi-Z. |
| 2 | 1A1 | input | Bank 1, channel 1 Schmitt-trigger input. |
| 3 | 2Y4 | output | Bank 2, channel 4 inverting 3-state output. |
| 4 | 1A2 | input | Bank 1, channel 2 Schmitt-trigger input. |
| 5 | 2Y3 | output | Bank 2, channel 3 inverting 3-state output. |
| 6 | 1A3 | input | Bank 1, channel 3 Schmitt-trigger input. |
| 7 | 2Y2 | output | Bank 2, channel 2 inverting 3-state output. |
| 8 | 1A4 | input | Bank 1, channel 4 Schmitt-trigger input. |
| 9 | 2Y1 | output | Bank 2, channel 1 inverting 3-state output. |
| 10 | GND | power_in | Ground. |
| 11 | 2A1 | input | Bank 2, channel 1 Schmitt-trigger input. |
| 12 | 1Y4 | output | Bank 1, channel 4 inverting 3-state output. |
| 13 | 2A2 | input | Bank 2, channel 2 Schmitt-trigger input. |
| 14 | 1Y3 | output | Bank 1, channel 3 inverting 3-state output. |
| 15 | 2A3 | input | Bank 2, channel 3 Schmitt-trigger input. |
| 16 | 1Y2 | output | Bank 1, channel 2 inverting 3-state output. |
| 17 | 2A4 | input | Bank 2, channel 4 Schmitt-trigger input. |
| 18 | 1Y1 | output | Bank 1, channel 1 inverting 3-state output. |
| 19 | 2OE | input | Bank 2 output enable, active low; a high level puts the Bank 2 outputs in hi-Z. |
| 20 | VCC | power_in | Positive supply, recommended 2V to 6V (absolute maximum 7V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-20 |
| Category | Logic |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Positive switching threshold | VT+ | 1.13 | 1.26 | 1.37 | V | VCC = 2V | 5 |
| Positive switching threshold | VT+ | 2.31 | 2.47 | 2.66 | V | VCC = 4.5V | 5 |
| Positive switching threshold | VT+ | 2.99 | 3.18 | 3.44 | V | VCC = 6V | 5 |
| Negative switching threshold | VT- | 0.55 | 0.62 | 0.71 | V | VCC = 2V | 5 |
| Negative switching threshold | VT- | 1.21 | 1.36 | 1.5 | V | VCC = 4.5V | 5 |
| Negative switching threshold | VT- | 1.56 | 1.79 | 1.99 | V | VCC = 6V | 5 |
| Hysteresis VT+ - VT- | ΔVT | 0.54 | 0.64 | 0.71 | V | VCC = 2V | 5 |
| Hysteresis VT+ - VT- | ΔVT | 0.94 | 1.11 | 1.27 | V | VCC = 4.5V | 5 |
| Hysteresis VT+ - VT- | ΔVT | 1.2 | 1.38 | 1.57 | V | VCC = 6V | 5 |
| High-level output voltage | VOH | 4 | 4.3 | V | VI = VIH or VIL, IOH = -6mA, VCC = 4.5V | 5 | |
| High-level output voltage | VOH | 5.4 | 5.75 | V | VI = VIH or VIL, IOH = -7.8mA, VCC = 6V | 5 | |
| Low-level output voltage | VOL | 0.002 | 0.1 | V | VI = VIH or VIL, IOL = 20µA, VCC = 2V to 6V | 5 | |
| Low-level output voltage | VOL | 0.18 | 0.3 | V | VI = VIH or VIL, IOL = 4mA, VCC = 4.5V | 5 | |
| Low-level output voltage | VOL | 0.22 | 0.33 | V | VI = VIH or VIL, IOL = 7.8mA, VCC = 6V | 5 | |
| Input leakage current | II | -1000 | 100 | 1000 | nA | VI = VCC or 0, VCC = 6V | 5 |
| Output leakage current (3-state only) | IOZ | 0.01 | 2 | µA | VO = VCC or 0, VCC = 6V | 5 | |
| Supply current | ICC | 0.1 | 2 | µA | VI = VCC or 0, IO = 0, VCC = 6V | 5 | |
| Input capacitance | Ci | 5 | pF | VCC = 2V to 6V | 5 | ||
| Propagation delay A to Y | tpd | 13 | 45 | ns | VCC = 2V, CL = 50pF | 5 | |
| Propagation delay A to Y | tpd | 7 | 18 | ns | VCC = 4.5V, CL = 50pF | 5 | |
| Propagation delay A to Y | tpd | 6 | 16 | ns | VCC = 6V, CL = 50pF | 5 | |
| Enable time OE to Y | ten | 15 | 44 | ns | VCC = 2V, CL = 50pF | 5 | |
| Enable time OE to Y | ten | 7 | 22 | ns | VCC = 4.5V, CL = 50pF | 5 | |
| Enable time OE to Y | ten | 6 | 18 | ns | VCC = 6V, CL = 50pF | 5 | |
| Disable time OE to Y | tdis | 12 | 30 | ns | VCC = 2V, CL = 50pF | 5 | |
| Disable time OE to Y | tdis | 9 | 20 | ns | VCC = 4.5V, CL = 50pF | 5 | |
| Disable time OE to Y | tdis | 8 | 19 | ns | VCC = 6V, CL = 50pF | 5 | |
| Transition time | tt | 9 | 16 | ns | VCC = 2V, CL = 50pF | 5 | |
| Transition time | tt | 5 | 9 | ns | VCC = 4.5V, CL = 50pF | 5 | |
| Transition time | tt | 4 | 8 | ns | VCC = 6V, CL = 50pF | 5 | |
| Power dissipation capacitance per gate | Cpd | 20 | pF | No load | 5 | ||
| Supply voltage | VCC | -0.5 | 7 | V | 4 | ||
| Input clamp current | IIK | -20 | 20 | mA | VI < -0.5V or VI > VCC + 0.5V | 4 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < -0.5V or VO > VCC + 0.5V | 4 | |
| Continuous output current | IO | -35 | 35 | mA | VO = 0 to VCC | 4 | |
| Continuous current through VCC or GND | ICC | -70 | 70 | mA | 4 | ||
| Junction temperature | TJ | 150 | °C | Verified by design | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD human-body model | V(ESD) | -4000 | 4000 | V | HBM, ANSI/ESDA/JEDEC JS-001 | 4 | |
| ESD charged-device model | V(ESD) | -1500 | 1500 | V | CDM, ANSI/ESDA/JEDEC JS-002 | 4 | |
| Supply voltage | VCC | 2 | 5 | 6 | V | 4 | |
| Input voltage | VI | 0 | V | Max = VCC | 4 | ||
| Output voltage | VO | 0 | V | Max = VCC | 4 | ||
| Ambient temperature | TA | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 130.6 | °C/W | DGS (VSSOP) 20 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 68.7 | °C/W | DGS (VSSOP) 20 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 85.4 | °C/W | DGS (VSSOP) 20 pins | 4 | ||
| Junction-to-top characterization parameter | ΨJT | 10.5 | °C/W | DGS (VSSOP) 20 pins | 4 | ||
| Junction-to-board characterization parameter | ΨJB | 85 | °C/W | DGS (VSSOP) 20 pins | 4 |
CAD (Adom-generated)
- Symbol:
SN74HCS240DGSR - Footprint:
Adom_Gen:Texas_Instruments_SN74_f06a75 - 3D model: generated to fit the land (STEP)
- 3D model files:
sn74hcs240dgsr-etched.step/sn74hcs240dgsr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74hcs240dgsr.step/sn74hcs240dgsr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
d51b3feb59dc3f0b, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.