component

SST25VF010A-33-4I-SAE

Public Made by Adom

by adom

Microchip Tech NOR FLASH, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentmemorysst25vf010a-33-4i-saefactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SST25VF010A-33-4I-SAE

Microchip Tech · NOR FLASH · SOIC-8

SST25VF010A-33-4I-SAE from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CE# input Chip Enable: the device is enabled by a high-to-low transition on CE#, and CE# must remain low for the duration of any command sequence.
2 SO output Serial Data Output: transfers data serially out of the device, shifted out on the falling edge of the serial clock.
3 WP# input Write Protect: used to enable/disable the BPL bit in the status register.
4 VSS power_in Ground reference for the device.
5 SI input Serial Data Input: transfers commands, addresses, or data serially into the device, latched on the rising edge of the serial clock.
6 SCK input Serial Clock: provides the timing of the serial interface, with commands, addresses, or input data latched on the rising edge and output data shifted out on the falling edge.
7 HOLD# input Hold: temporarily stops serial communication with the SPI flash memory without resetting the device.
8 VDD power_in Power supply: provides 2.7-3.6V supply voltage to the device.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient Temperature (Industrial) -40 85 °C Industrial range 19
Supply Voltage VDD VDD 2.7 3.6 V Industrial range 19
Temperature Under Bias -55 125 °C 19
Storage Temperature -65 150 °C 19
D.C. Voltage on Any Pin to Ground Potential -0.5 V 19
Transient Voltage on Any Pin to Ground Potential -2 V <20 ns 19
Package Power Dissipation Capability 1 W TA = 25°C 19
Surface Mount Solder Reflow Temperature 260 °C for 10 seconds 19
Output Short Circuit Current 50 mA Output shorted for no more than one second 19
Read Current IDDR 10 mA CE#=0.1 VDD/0.9 VDD@20 MHz, SO=open 19
Program and Erase Current IDDW 30 mA CE#=VDD 19
Standby Current ISB 15 µA CE#=VDD,VIN=VDD or VSS 19
Input Leakage Current ILI 1 µA VIN=GND to VDD,VDD=VDD Max 19
Output Leakage Current ILO 1 µA VOUT=GND to VDD,VDD=VDD Max 19
Input Low Voltage VIL 0.8 V VDD=VDD Min 19
Output Low Voltage VOL 0.2 V IOL=100 µA, VDD=VDD Min 19
VDD Min to Read Operation TPU-READ 10 µs 20
VDD Min to Write Operation TPU-WRITE 10 µs 20
Output Pin Capacitance COUT 12 pF VOUT = 0V 20
Input Capacitance CIN 6 pF VIN = 0V 20
Endurance NEND 10000 Cycles 20
Data Retention TDR 100 Years 20
Serial Clock Frequency FCLK 33 MHz 21
Serial Clock High Time TSCKH 13 ns 21
Serial Clock Low Time TSCKL 13 ns 21
Serial Clock Rise Time (slew rate) TSCKR 0.1 V/ns 21
Serial Clock Fall Time (slew rate) TSCKF 0.1 V/ns 21
CE# Active Setup Time TCES 12 ns Relative to SCK 21
CE# Active Hold Time TCEH 12 ns Relative to SCK 21
CE# Not Active Setup Time TCHS 10 ns 21
CE# Not Active Hold Time TCHH 10 ns 21
CE# High Time TCPH 100 ns 21
CE# High to High-Z Output TCHZ 14 ns 21
SCK Low to Low-Z Output TCLZ 0 ns 21
Data In Setup Time TDS 3 ns 21
Data In Hold Time TDH 3 ns 21
HOLD# Low Setup Time THLS 10 ns 21
HOLD# High Setup Time THHS 10 ns 21
HOLD# Low Hold Time THLH 10 ns 21
HOLD# High Hold Time THHH 10 ns 21
HOLD# Low to High-Z Output THZ 14 ns 21
HOLD# High to Low-Z Output TLZ 14 ns 21
Output Hold from SCK Change TOH 0 ns 21
Output Valid from SCK TV 12 ns 21
Sector-Erase TSE 25 ms 21
Block-Erase TBE 25 ms 21
Chip-Erase TSCE 100 ms 21
Byte-Program TBP 20 µs 21

CAD (KiCad official)

  • Symbol: SST25VF010A-33-4I-SAE
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: sst25vf010a-33-4i-sae-etched.step / sst25vf010a-33-4i-sae-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sst25vf010a-33-4i-sae.step / sst25vf010a-33-4i-sae.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (28 pp, sha256 0e1ad418f5f4748c, retrieved 2026-10-21, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF