Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLC2652I-8DR

Texas Instruments · Precision Op Amps · SOIC-8

TLC2652I-8DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CXA passive Connection for external nulling capacitor CXA (0.1 µF to 1 µF), returned to VDD− or C RETURN.
2 IN− input Inverting input of the chopper-stabilized amplifier; inputs withstand ±100-mA surge currents without latch-up.
3 IN+ input Noninverting input; common-mode range includes the negative rail up to VDD+ −1.9 V.
4 VDD− power_in Negative supply; total supply range is ±1.9 V to ±8 V, and external capacitors may be returned here without noise degradation.
5 CLAMP passive Output clamp pin that reduces overload recovery time when connected to the inverting input, activating when the output is about 1 V from either rail.
6 OUT output Amplifier output; absolute maximum output current is ±50 mA and short-circuit to either supply is allowed if dissipation limits are kept.
7 VDD+ power_in Positive supply; absolute maximum is 8 V and the recommended supply range is ±1.9 V to ±8 V.
8 CXB passive Connection for external nulling capacitor CXB (0.1 µF to 1 µF), returned to VDD− or C RETURN.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VIO 0.6 3 µV TA = 25°C 7
Input offset voltage VIO 4.95 µV Full range (−40°C to 85°C) 7
Temperature coefficient of input offset voltage αVIO 0.003 0.03 µV/°C Full range (−40°C to 85°C) 7
Input offset voltage long-term drift 0.003 0.06 µV/mo VIC = 0, RS = 50 Ω; TA = 25°C 7
Input offset current IIO 2 60 pA TA = 25°C 7
Input offset current IIO 150 pA Full range (−40°C to 85°C) 7
Input bias current IIB 4 60 pA TA = 25°C 7
Input bias current IIB 150 pA Full range (−40°C to 85°C) 7
Common-mode input voltage range VICR -5 3.1 V RS = 50 Ω; Full range (−40°C to 85°C) 7
Maximum positive peak output voltage swing VOM+ 4.7 4.8 V RL = 10 kΩ; see Note 5 (output clamp not connected); TA = 25°C 7
Maximum positive peak output voltage swing VOM+ 4.7 V RL = 10 kΩ; see Note 5; Full range (−40°C to 85°C) 7
Maximum negative peak output voltage swing VOM− -4.9 -4.7 V RL = 10 kΩ; see Note 5; TA = 25°C 7
Maximum negative peak output voltage swing VOM− -4.7 V RL = 10 kΩ; see Note 5; Full range (−40°C to 85°C) 7
Large-signal differential voltage amplification AVD 120 150 dB VO = ±4 V, RL = 10 kΩ; TA = 25°C 7
Large-signal differential voltage amplification AVD 120 dB VO = ±4 V, RL = 10 kΩ; Full range (−40°C to 85°C) 7
Common-mode rejection ratio CMRR 120 140 dB VO = 0, VIC = VICRmin; TA = 25°C 7
Common-mode rejection ratio CMRR 120 dB VO = 0, VIC = VICRmin, RS = 50 Ω; Full range (−40°C to 85°C) 7
Supply-voltage rejection ratio kSVR 110 135 dB VDD± = ±1.9 V to ±8 V; TA = 25°C 7
Supply-voltage rejection ratio kSVR 110 dB VDD± = ±1.9 V to ±8 V, VO = 0, RS = 50 Ω; Full range (−40°C to 85°C) 7
Supply current IDD 1.5 2.4 mA VO = 0, No load; TA = 25°C 7
Supply current IDD 2.5 mA VO = 0, No load; Full range (−40°C to 85°C) 7
Positive slew rate at unity gain SR+ 2 2.8 V/µs VO = ±2.3 V, RL = 10 kΩ; TA = 25°C 8
Positive slew rate at unity gain SR+ 1.4 V/µs VO = ±2.3 V, RL = 10 kΩ; Full range (−40°C to 85°C) 8
Negative slew rate at unity gain SR− 2.3 3.1 V/µs RL = 10 kΩ, CL = 100 pF; TA = 25°C 8
Negative slew rate at unity gain SR− 1.7 V/µs RL = 10 kΩ, CL = 100 pF; Full range (−40°C to 85°C) 8
Supply voltage VDD± 1.9 8 V I suffix 4
Operating free-air temperature TA -40 85 °C I suffix 4
Supply voltage VDD+ VDD+ 8 V see Note 1 (voltages referenced to midpoint of VDD+ and VDD−) 4
Supply voltage VDD− VDD− -8 V see Note 1 (voltages referenced to midpoint of VDD+ and VDD−) 4
Differential input voltage VID -16 16 V see Note 2 (IN+ with respect to IN−) 4
Input voltage VI -8 8 V any input, see Note 1 4
Voltage range on CLK IN and INT/EXT 5.2 V VDD− to VDD− + 5.2 V (referenced to VDD−) 4
Input current (each input) II -5 5 mA each input 4
Output current IO -50 50 mA 4
Current into CLK IN and INT/EXT -5 5 mA 4
Operating free-air temperature range TA -40 85 °C I suffix 4
Storage temperature range -65 150 °C 4
Lead temperature 260 °C 1.6 mm from case for 10 s; D, N or P package 4
Power rating PD 725 mW D008 (SOIC-8) package; TA ≤ 25°C 4
Derating factor 5.8 mW/°C D008 (SOIC-8) package; above TA = 25°C 4
Power rating PD 464 mW D008 (SOIC-8) package; TA = 70°C 4
Power rating PD 377 mW D008 (SOIC-8) package; TA = 85°C 4
Power rating PD 145 mW D008 (SOIC-8) package; TA = 125°C 4

CAD (KiCad official)

  • Symbol: TLC2652I-8DR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tlc2652i-8dr-etched.step / tlc2652i-8dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlc2652i-8dr.step / tlc2652i-8dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (45 pp, sha256 5ae9c4459b4f1528, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF