Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TSV612AIST

STMicroelectronics · Operational Amplifier · MSOP-8

TSV612AIST from STMicroelectronics, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Out1 output Channel 1 output is rail-to-rail, staying less than 35 mV from GND and from VCC when loaded with 10 kΩ to VCC/2.
2 In1- input Channel 1 inverting input; the common-mode input range extends from (VCC-) - 0.1 V to (VCC+) + 0.1 V.
3 In1+ input Channel 1 non-inverting input; the common-mode input range extends from (VCC-) - 0.1 V to (VCC+) + 0.1 V.
4 VCC- power_in Negative supply rail, 0 V in the characterization conditions; the device operates from a 1.5 to 5.5 V total supply.
5 In2+ input Channel 2 non-inverting input; the common-mode input range extends from (VCC-) - 0.1 V to (VCC+) + 0.1 V.
6 In2- input Channel 2 inverting input; the common-mode input range extends from (VCC-) - 0.1 V to (VCC+) + 0.1 V.
7 Out2 output Channel 2 output is rail-to-rail, staying less than 35 mV from GND and from VCC when loaded with 10 kΩ to VCC/2.
8 VCC+ power_in Positive supply rail, 1.5 to 5.5 V; a 10 nF decoupling capacitor should be placed as close as possible to this pin.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package MSOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage (TSV61xA) Vio 0.8 mV VCC+ = 5 V, Tamb = 25 °C 7
Input offset voltage (TSV61xA), over temperature Vio 2 mV VCC+ = 5 V; Tmin < Top < Tmax 7
Input offset current Iio 1 10 pA VCC+ = 5 V, Vout = Vcc/2 7
Input offset current, over temperature Iio 1 100 pA VCC+ = 5 V; Tmin < Top < Tmax 7
Input bias current Iib 1 10 pA VCC+ = 5 V, Vout = Vcc/2 7
Input bias current, over temperature Iib 1 100 pA VCC+ = 5 V; Tmin < Top < Tmax 7
Common mode rejection ratio CMR 64 80 dB VCC+ = 5 V; 0 V to 5 V, Vout = 2.5 V 7
Common mode rejection ratio, over temperature CMR 63 dB VCC+ = 5 V; Tmin < Top < Tmax 7
Supply voltage rejection ratio SVR 76 93 dB VCC+ = 5 V; Vcc = 1.8 to 5 V 7
Supply voltage rejection ratio, over temperature SVR 74 dB VCC+ = 5 V; Tmin < Top < Tmax 7
Large signal voltage gain Avd 88 93 dB VCC+ = 5 V; RL = 10 kΩ, Vout = 0.5 V to 4.5 V 7
Large signal voltage gain, over temperature Avd 85 dB VCC+ = 5 V; Tmin < Top < Tmax 7
High level output voltage (VCC - Vout) VOH 7 35 mV VCC+ = 5 V; RL = 10 kΩ 7
High level output voltage (VCC - Vout), over temperature VOH 50 mV VCC+ = 5 V; RL = 10 kΩ, Tmin < Top < Tmax 7
Low level output voltage VOL 16 35 mV VCC+ = 5 V; RL = 10 kΩ 7
Low level output voltage, over temperature VOL 50 mV VCC+ = 5 V; RL = 10 kΩ, Tmin < Top < Tmax 7
Output sink current Isink 52 57 mA VCC+ = 5 V; Vo = VCC 7
Output sink current, over temperature Isink 42 mA VCC+ = 5 V; Vo = VCC, Tmin < Top < Tmax 7
Output source current Isource 58 63 mA VCC+ = 5 V; Vo = 0 V 7
Output source current, over temperature Isource 49 mA VCC+ = 5 V; Vo = 0 V, Tmin < Top < Tmax 7
Supply current (per operator) ICC 7.5 10.5 µA VCC+ = 5 V; No load, Vout = VCC/2 7
Supply current (per operator), over temperature ICC 7 15 µA VCC+ = 5 V; Tmin < Top < Tmax 7
Input offset voltage (TSV61xA) Vio 0.8 mV VCC+ = 1.8 V, Tamb = 25 °C 4
Input offset voltage (TSV61xA), over temperature Vio 2 mV VCC+ = 1.8 V; Tmin < Top < Tmax 4
Input offset current Iio 1 10 pA VCC+ = 1.8 V; Vout = Vcc/2 4
Input offset current, over temperature Iio 1 100 pA VCC+ = 1.8 V; Tmin < Top < Tmax 4
Input bias current Iib 1 10 pA VCC+ = 1.8 V; Vout = Vcc/2 4
Input bias current, over temperature Iib 1 100 pA VCC+ = 1.8 V; Tmin < Top < Tmax 4
Common mode rejection ratio CMR 55 71 dB VCC+ = 1.8 V; 0 V to 1.8 V, Vout = 0.9 V 4
Common mode rejection ratio, over temperature CMR 53 dB VCC+ = 1.8 V; Tmin < Top < Tmax 4
Large signal voltage gain Avd 78 83 dB VCC+ = 1.8 V; RL = 10 kΩ, Vout = 0.5 V to 1.3 V 4
Large signal voltage gain, over temperature Avd 74 dB VCC+ = 1.8 V; Tmin < Top < Tmax 4
High level output voltage (VCC - Vout) VOH 4 35 mV VCC+ = 1.8 V; RL = 10 kΩ 4
High level output voltage (VCC - Vout), over temperature VOH 50 mV VCC+ = 1.8 V; RL = 10 kΩ, Tmin < Top < Tmax 4
Low level output voltage VOL 7 35 mV VCC+ = 1.8 V; RL = 10 kΩ 4
Low level output voltage, over temperature VOL 50 mV VCC+ = 1.8 V; RL = 10 kΩ, Tmin < Top < Tmax 4
Output sink current Isink 9 13 mA VCC+ = 1.8 V; Vo = 1.8 V 4
Output sink current, over temperature Isink 9 mA VCC+ = 1.8 V; Vo = 1.8 V, Tmin < Top < Tmax 4
Output source current Isource 8 10 mA VCC+ = 1.8 V; Vo = 0 V 4
Output source current, over temperature Isource 8 mA VCC+ = 1.8 V; Vo = 0 V, Tmin < Top < Tmax 4
Supply current (per operator) ICC 6.5 9 µA VCC+ = 1.8 V; No load, Vout = Vcc/2 4
Supply current (per operator), over temperature ICC 6 12.5 µA VCC+ = 1.8 V; Tmin < Top < Tmax 4
Supply voltage VCC 6 V 3
Storage temperature Tstg -65 150 °C 3
Maximum junction temperature Tj 150 °C 3
ESD HBM: human body model ESD 4 kV Human body model, 100 pF through 1.5 kΩ 3
ESD MM: machine model ESD 200 V Machine model, 200 pF 3
ESD CDM: charged device model ESD 1.5 kV Charged device model 3
Latch-up immunity 200 mA 3
Thermal resistance junction to ambient, MiniSO8 Rthja 190 °C/W Typical value, MiniSO8 package 3
Supply voltage VCC 1.5 5.5 V 3
Operating free air temperature range Toper -40 85 °C 3

CAD (KiCad official)

  • Symbol: TSV612AIST
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: tsv612aist-etched.step / tsv612aist-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tsv612aist.step / tsv612aist.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (21 pp, sha256 cba404efd89d0113, retrieved 2026-11-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF