Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

GM7401ARZ-3.3-R7

GONGMOSEMI · Voltage Reference · SO-8

GM7401ARZ-3.3-R7 from GONGMOSEMI, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection; float in the application.
2 VIN power_in Power supply input; electrical characteristics are specified with VIN = MAX((VOUT + 1 V), 3.5 V), and the absolute maximum input voltage is 45 V.
3 TEMP output Temperature monitor pin providing an unbuffered PTAT voltage of 657 mV typical with a 2.2 mV/°C temperature sensitivity.
4 GND power_in Ground reference for the device.
5 TRIM passive Output voltage trim pin; with a 10 kΩ potentiometer the output adjustment range is listed as ±3 ±6 %.
6 VOUT power_out Voltage reference output, rated for +/-10 mA output drive (at low output impedance) with internal short-circuit current protection.
7 NC unconnected No internal connection; float in the application.
8 NC unconnected No internal connection; float in the application.

Key specifications

Parameter Value
Manufacturer GONGMOSEMI
Package SO-8
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage accuracy (Grade A) VO -0.04 0.04 % Grade A 5
Temperature coefficient (Grade A, SOIC) TCVO 1.5 3 ppm/°C Grade A, 8-pin SOIC, −40°C < TA < +125°C, 0°C < TA < +70°C 5
Minimum input-output dropout VDO 0.2 V VOUT = 3.3V, 4.096V 5
Line regulation ∆VO/∆VIN 15 25 ppm/V VIN = 4.0 V to 50 V, −40°C < TA < +125°C 5
Line regulation ∆VO/∆VIN 15 30 ppm/V VIN = 4.0 V to 50 V, −55°C < TA < +125°C 5
Load regulation ∆VO/∆ILOAD 15 45 ppm/mA ILOAD = 0 mA to 10 mA, −40°C < TA < +125°C, VIN = 10.0 V 5
Load regulation ∆VO/∆ILOAD 15 50 ppm/mA ILOAD = 0 mA to 10 mA, −55°C < TA < +125°C, VIN = 10.0 V 5
Quiescent current IIN 1.2 mA No load, −55°C < TA < +125°C 5
Output voltage noise eN p-p 2 ppm p-p 0.1 Hz to 10.0 Hz 5
Output voltage noise density eN 187 nV/√Hz 1 kHz, VOUT = 3.3V 5
Turn-on settling time tR 800 µs 5
Long-term stability ΔVOUT_LTD 60 ppm 1000 hours 5
Output voltage hysteresis ∆VOUT_HYS 50 ppm 5
Power supply rejection ratio PSRR -75 dB fIN = 10 kHz 5
Short-circuit current ISC 30 mA 5
Output adjustment range ∆VTRIM 3 6 % POT = 10 kΩ 5
TEMP pin output voltage VTEMP 657 mV 5
Temperature sensitivity of TEMP pin TCVTEMP 2.2 mV/°C 5
Input voltage (absolute maximum) 45 V 4
Storage temperature range -65 150 °C 4
Operating temperature (SOIC and MSOP) -55 125 °C 4
Junction temperature -65 150 °C 4
Lead temperature, soldering 300 °C 60 s 4
Thermal resistance junction-to-ambient θJA 130 °C/W 8-pin SOIC, worst case, surface-mount soldered to PCB 4
Thermal resistance junction-to-case θJC 43 °C/W 8-pin SOIC 4
Supply voltage range VIN 3.5 40 V 宽电源电压范围 1
Output drive current IOUT -10 10 mA 低输出阻抗条件下 1
Operating temperature range (ARZ) -40 125 °C GM7401ARZ-3.3-R7, 8-pin SO 14

CAD (KiCad official)

  • Symbol: GM7401ARZ-3.3-R7
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: gm7401arz-3-3-r7-etched.step / gm7401arz-3-3-r7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gm7401arz-3-3-r7.step / gm7401arz-3-3-r7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: GONGMOSEMI datasheet (14 pp, sha256 9d56523ce2216a57, retrieved 2026-11-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF