Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

INA114AP

Texas Instruments · Instrumentation Amplifiers · DIP-8

INA114AP from Texas Instruments, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RG passive Gain-setting resistor terminal; external RG between pins 1 and 8 sets gain G = 1 + 50kΩ/RG (range 1 to 10000).
2 V-IN power_in Inverting input, protected to ±40V, and needs a bias current return path.
3 V+IN power_in Non-inverting input, protected to ±40V, and needs a bias current return path.
4 V- power_in Negative supply; dual supply range is ±2.25V to ±18V.
5 Ref input Output reference pin, normally grounded, and must be low impedance to maintain good common-mode rejection.
6 VO output Amplifier output, short-circuit current +20/-15mA, with the output sense connected internally in the DIP version.
7 V+ power_in Positive supply; dual supply range is ±2.25V to ±18V (single supply 4.5V to 36V).
8 RG passive Gain-setting resistor terminal; external RG between pins 1 and 8 sets gain G = 1 + 50kΩ/RG (range 1 to 10000).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package DIP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage RTI (AP) VOS -125 25 125 µV TA = 25°C, RTI; typ ±(25 + 30/G), max ±(125 + 500/G); G-dependent term not included 5
Input offset voltage drift (AP) -1 0.25 1 µV/℃ TA = -40℃ to +85℃, RTI; typ ±(0.25 + 5/G), max ±(1 + 10/G); G-dependent term not included 5
Long-term stability -0.2 0.2 0.2 µV/mo ±(0.2 + 0.5/G); G-dependent term not included 5
Input bias current (AP) IB -5 0.5 5 nA VCM = VS/2 5
Input bias current drift (AP) -8 8 8 pA/℃ TA = -40℃ to +85℃ 5
Input offset current (AP) IOS -5 0.5 5 nA VCM = VS/2 5
Input offset current drift (AP) -8 8 8 pA/℃ TA = -40℃ to +85℃ 5
Gain error (AP) GE -0.05 0.01 0.05 % VO = ±10V, G = 1 6
Gain error (AP) GE -0.5 0.02 0.5 % VO = ±10V, G = 10 6
Gain error (AP) GE -0.7 0.05 0.7 % VO = ±10V, G = 100 6
Gain error (AP) GE -2 0.5 2 % VO = ±10V, G = 1000 6
Gain drift -10 2 10 ppm/°C 6
Gain drift with RS = 50kΩ -100 25 100 ppm/°C RS = 50kΩ; temperature coefficient of the 50kΩ term in the gain equation (footnote 1) 6
Gain nonlinearity (AP) -0.002 0.0001 0.002 % VO = -10V to +10V, G = 1; % of FSR 6
Gain nonlinearity (AP) -0.004 0.0005 0.004 % VO = -10V to +10V, G = 10, 100; % of FSR 6
Gain nonlinearity (AP) -0.02 0.002 0.02 % VO = -10V to +10V, G = 1000; % of FSR 6
Common-mode rejection ratio (AP) CMRR 75 90 dB DC to 60Hz, RTI, VCM = ±10V, ΔRS = 1kΩ, G = 1 5
Common-mode rejection ratio (AP) CMRR 90 106 dB DC to 60Hz, RTI, VCM = ±10V, ΔRS = 1kΩ, G = 10 5
Common-mode rejection ratio (AP) CMRR 106 110 dB DC to 60Hz, RTI, VCM = ±10V, ΔRS = 1kΩ, G = 100 5
Power supply rejection ratio PSRR 0.5 3 µV/V RTI, ±2.25V to ±18V; typ 0.5 + 2/G, max 3 + 10/G; G-dependent term not included 5
Gain range G 1 10000 V/V 6
Short-circuit current ISC -15 20 mA Continuous, to VS/2 6
Quiescent current IQ 2.2 3 mA VS = ±2.25V to ±18V, VIN = 0V 6
Supply voltage, single supply (absolute maximum) VS 36 V Single supply, VS = (+VS) 4
Supply voltage, dual supply (absolute maximum) VS -18 18 V Dual supply, VS = (+VS) – (–VS) 4
Signal input pins voltage (absolute maximum) -40 40 V Signal input pins 4
Operating temperature (absolute maximum) TA -40 125 °C 4
Junction temperature (absolute maximum) TJ 150 °C 4
Storage temperature (absolute maximum) Tstg -40 125 °C 4
ESD human body model (HBM) V(ESD) -1500 1500 V HBM per ANSI/ESDA/JEDEC JS-001 4
ESD charged device model (CDM) V(ESD) -1500 1500 V CDM per ANSI/ESDA/JEDEC JS-002 4
Supply voltage, single supply (recommended) VS 4.5 36 V Single supply, VS = (+VS) 4
Supply voltage, dual supply (recommended) VS 2.25 18 V Dual supply, VS = (+VS) – (–VS); datasheet prints ±2.25 and ±18 4
Rated operating temperature TA -40 85 °C 4
Junction-to-ambient thermal resistance (PDIP-8, P package) RθJA 110.2 ℃/W 8-pin PDIP (P) package 4

CAD (KiCad official)

  • Symbol: INA114AP
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: ina114ap-etched.step / ina114ap-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina114ap.step / ina114ap.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (33 pp, sha256 be785d859b483481, retrieved 2026-10-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF