Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM7805CT

HGSEMI · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-220

LM7805CT from HGSEMI, in a TO-220. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INPUT power_in Unregulated positive input supply. For the 5 V (LM7805C) variant the recommended input range is 7 V to 25 V, absolute maximum 35 V. A 0.33 uF bypass capacitor to GND is recommended close to the pin.
2 OUTPUT power_out Regulated +5 V positive output. Delivers up to 1.5 A with adequate heat sinking; internally current-limited and thermally protected. A 0.1 uF output capacitor to GND is recommended for stability.
3 GND power_in Common ground reference for input and output. On the TO-220-3 package the ground pin is also thermally/electrically connected to the metal tab.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package TO-220
Category PMIC
Pins 3

Ordering variants

Same part, different packaging or reel option.

  • LM7805CT
  • LM7805CTCS/TR

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage VO 4.8 5 5.2 V TJ = 25°C 5
Output Voltage VO 4.75 5 5.25 V IO = 5 mA to 1 A, PO ≤ 15W, VI = 7 to 20 V 5
Line Regulation ΔVO(*) 3 100 mV VI = 7 to 25 V, TJ = 25°C 5
Line Regulation ΔVO(*) 1 50 mV VI = 8 to 12 V, TJ = 25°C 5
Load Regulation ΔVO(*) 100 mV IO = 5 mA to 1.5 A, TJ = 25°C 5
Load Regulation ΔVO(*) 50 mV IO = 250 to 750 mA, TJ = 25°C 5
Quiescent Current Id 8 mA TJ = 25°C 5
Quiescent Current Change ΔId 0.5 mA IO = 5 mA to 1 A 5
Quiescent Current Change ΔId 0.8 mA VI = 7 to 25 V 5
Output Voltage Drift ΔVO/ΔT -1.1 mV/°C IO = 5 mA 5
Output Noise Voltage eN 40 μV/VO B = 10Hz to 100KHz, TJ = 25°C 5
Supply Voltage Rejection SVR 62 dB VI = 8 to 18 V, f = 120Hz 5
Dropout Voltage Vd 2 V IO = 1 A, TJ = 25°C 5
Output Resistance RO 17 mΩ f = 1 KHz 5
Short Circuit Current Isc 0.75 A VI = 35 V, TJ = 25°C 5
Short Circuit Peak Current Iscp 2.2 A TJ = 25°C 5
DC Input Voltage VI 35 V 3
Storage Temperature Range Tstg -65 150 °C 3
Lead Temperature (Soldering) TLEAD 245 °C 10 seconds 3
Top Operating Junction Temperature Range Top 0 125 °C 3
Junction-to-ambient thermal resistance RθJA 23.9 °C/W TO-220 3
Junction-to-case (top) thermal resistance RθJC(top) 16.7 °C/W TO-220 3
Junction-to-board thermal resistance RθJB 5.3 °C/W TO-220 3
Junction-to-case (bottom) thermal resistance RθJC(bot) 1.7 °C/W TO-220 3
Junction-to-top characterization parameter ΨJT 3.2 °C/W TO-220 3
Junction-to-board characterization parameter ΨJB 5.3 °C/W TO-220 3

CAD (KiCad official)

  • Symbol: LM7805CT
  • Footprint: Package_TO_SOT_THT:TO-220-3_Vertical
  • 3D model: TO-220 (KiCad packages3D, STEP)
  • 3D model files: lm7805ct-etched.step / lm7805ct-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm7805ct.step / lm7805ct.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
lm7805ct.step 83 KB You want the bare part, or you mark your own boards.
lm7805ct-etched.step 740 KB You want the part with LM7805CT already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 196 faces against 48 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (16 pp, sha256 f70b2e22c7f5c571, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF