component
XC6366B103MR-G
Public Made by Adomby adom
Torex Semicon DC-DC Converters, SOT-25. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXC6366B103MR-G
Torex Semicon · DC-DC Converters · SOT-25
XC6366B103MR-G from Torex Semicon, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EXT/ | output | External transistor connection that drives the gate of the external switching transistor, with EXT/ pin voltage limited to -0.3 to VIN+0.3 V and EXT/ pin current limited to ±100 mA. |
| 2 | VDD | power_in | Power supply input, operating from 2.2 V to 10 V for the VOUT type, with an absolute maximum rating of -0.3 to +12 V. |
| 3 | GND | power_in | Ground reference for the controller; the datasheet notes that switching ground current can destabilize operation, so the GND pin surroundings should be strengthened. |
| 4 | CE | input | Chip enable input, with CE High at 0.65 V minimum and CE Low at 0.20 V maximum, where standby current is below 0.5 μA when CE is Low; the soft-start capacitor connection on this pin applies only to the C and D types. |
| 5 | VOUT (FB) | input | Feedback input for the externally set-up FB type (B and D), where the output is set by RFB1/RFB2 with the pin rated at -0.3 to VIN+0.3 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-25 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 2.925 | 3 | 3.075 | V | Ta=25℃ (table header) | 7 |
| Maximum Input Voltage | VIN | 10 | V | Ta=25℃ (table header) | 7 | ||
| UVLO Voltage (Minimum Operating Voltage) | VUVLO | 0.9 | 2.2 | V | Same as IDD1; voltage which EXT/ pin voltage holding H level | 7 | |
| Supply Current 1 | IDD1 | 55 | 100 | μA | No external components, CE=VIN, VOUT=0V | 7 | |
| Supply Current 2 (XC6366) | IDD2 | 15 | 27 | μA | CE=VDD, FB=1.2V (XC6366) | 7 | |
| Stand-by Current | ISTB | 0.5 | μA | No external components, CE=FB=0V | 7 | ||
| Oscillation Frequency | fOSC | 255 | 300 | 345 | kHz | Measuring of EXT/ waveform, VIN=output voltage + 0.1V | 7 |
| Maximum Duty Ratio | MAXDTY | 100 | % | Ta=25℃ (table header) | 7 | ||
| PFM Duty Ratio | PFMDTY | 15 | 25 | 35 | % | No load (XC6366 only) | 7 |
| CE High Voltage | VCEH | 0.65 | V | No external components, FB=0V; voltage which EXT/ pin holding L level | 7 | ||
| CE Low Voltage | VCEL | 0.2 | V | No external components, VOUT=0V; voltage which EXT/ pin holding H level | 7 | ||
| EXT High ON Resistance | REXTBH | 17 | 24 | μA | Same as IDD2, VEXT/=VIN-0.4V | 7 | |
| EXT Low ON Resistance | REXTBL | 15 | 20 | μA | Same as IDD1, VEXT/=0.4V | 7 | |
| Soft-Start Time | tSS | 5 | 10 | 20 | ms | Connect RSS, CSS, CE, 0V→3.0V (When VIN≦3.0V, VIN=3.0V) | 7 |
| VIN Pin Voltage | VDD | -0.3 | 12 | V | Voltage all ground standardized | 5 | |
| VOUT Pin Voltage | VOUT | -0.3 | V | Upper limit printed as VIN +0.3 | 5 | ||
| FB Pin Voltage | VFB | -0.3 | V | Upper limit printed as VIN +0.3 | 5 | ||
| CE Pin Voltage | VCE | -0.3 | V | Upper limit printed as VIN +0.3 | 5 | ||
| EXT/ Pin Voltage | VEXT/ | -0.3 | V | Upper limit printed as VIN +0.3 | 5 | ||
| EXT/ Pin Current | IEXT/ | -100 | 100 | mA | Printed as ±100 | 5 | |
| Power Dissipation SOT-25 | Pd | 150 | mW | SOT-25 package | 5 | ||
| Operating Temperature Range | Topr | -30 | 80 | ℃ | 5 | ||
| Storage Temperature Range | Tstg | -40 | 125 | ℃ | 5 | ||
| Input Voltage Range (VOUT type) | 2.2 | 10 | V | VOUT type, per Features section; not stated separately for FB type | 1 |
CAD (KiCad official)
- Symbol:
XC6366B103MR-G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files:
xc6366b103mr-g-etched.step/xc6366b103mr-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc6366b103mr-g.step/xc6366b103mr-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Torex Semicon datasheet (24 pp, sha256
f4d9169e1d5af8d2, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).