Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

L6384ED013TR

STMicroelectronics · Gate Drivers · SOP-8

L6384ED013TR from STMicroelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN input Logic input in phase with HVG and opposite phase with LVG, CMOS/TTL compatible with Vil Max = 1.5 V, Vih Min = 3.6 V.
2 VCC power_in Supply input voltage with internal clamp at typ. 15.6 V (absolute maximum -0.3 to 14.6 V, recommended Vclamp to 14.6 V).
3 DT/SD input High impedance deadtime/shutdown input: below typ. 0.5 V shuts down the device, above 0.5 V sets deadtime 0.4-3.1 µs via external resistor (47 k to 270 k).
4 GND power_in Ground.
5 LVG output Low-side driver output sourcing 400 mA and sinking 650 mA (typ.) with max 0.3 V guaranteed at 10 mA sink with VCC > 3 V.
6 VOUT passive High-side driver floating reference node; layout care required to avoid below-ground spikes.
7 HVG output High-side driver output sourcing 400 mA and sinking 650 mA (typ.) with max 0.3 V above VOUT at 10 mA sink with VCC > 3 V.
8 VBOOT power_in Bootstrap supply voltage for high-side driver floating supply with integrated bootstrap diode, minimum operating voltage 17 V (Vboot = Vout + VBS).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOP-8
Category Motor Driver ICs
Pins 8

CAD (KiCad official)

  • Symbol: L6384ED013TR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: l6384ed013tr-etched.step / l6384ed013tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); l6384ed013tr.step / l6384ed013tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (15 pp, sha256 dbca9ce9e120f55f, retrieved 2026-09-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF