Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MIC5201-3.3YM

Microchip Tech · Linear Voltage Regulators (LDO) · SOIC-8

MIC5201-3.3YM from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Regulated output; a 1 µF capacitor from output to ground is recommended to prevent oscillations, with larger values improving transient response.
2 NC unconnected Not internally connected; connect to the ground plane for the lowest thermal resistance.
3 GND power_in Ground.
4 NC unconnected Not internally connected; connect to the ground plane for the lowest thermal resistance.
5 EN input Enable input: high (at least 2.0 V) enables the regulator, while low (at most 0.5 V) or open disables it; it may be tied to VIN if unused.
6 NC unconnected Not internally connected; connect to the ground plane for the lowest thermal resistance.
7 NC unconnected Not internally connected; connect to the ground plane for the lowest thermal resistance.
8 VIN power_in Unregulated supply input; the fixed-version operating range is +2.5 V to +26 V.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy VO -2 2 % Variation from specified VOUT 4
Output Voltage Temperature Coefficient ΔVO/ΔT 40 150 ppm/°C Note 2 4
Line Regulation, Fixed ΔVO/VO 0.004 0.2 % VIN = VOUT + 1V to 26V 4
Line Regulation, Fixed (second line) ΔVO/VO 0.4 % VIN = VOUT + 1V to 26V 4
Load Regulation ΔVO/VO 0.04 0.3 % IL = 0.1 mA to 150 mA, Note 3 4
Load Regulation (second line) ΔVO/VO 0.4 % IL = 0.1 mA to 150 mA, Note 3 4
Dropout Voltage VIN, VO 270 400 mV IL = 150 mA 4
Ground Pin Current IGND 270 400 µA IL = 20 mA 4
Ground Pin Current IGND 1000 2000 µA IL = 100 mA 4
Ground Pin Current at Dropout IGDNDO 270 330 µA VIN = 0.5V less than specified VOUT, IL = 100 µA, Note 5 4
Current Limit ILIMIT 280 500 mA VOUT = 0V 4
Input Voltage Level (logic low, off) VIL 0.5 V Logic low (off) 4
Input Voltage Level (logic high, on) VIH 2 V Logic high (on) 4
Enable Input Current (low) IIL 0.01 1 µA VIL ≤ 0.5V 4
Enable Input Current (high) IIH 15 70 µA VIH ≥ 2.0V 4
Junction Temperature Range TJ -40 85 °C 6
Lead Temperature 260 °C Soldering, 5 sec. 6
Supply Input Voltage (VIN) Fixed VIN -20 60 V 3
Enable Input Voltage (VEN) Fixed VEN -20 60 V 3
Supply Input Voltage (VIN) Fixed VIN 2.5 26 V 3
Enable Input Voltage (VEN) VEN 0 V Upper limit printed as VIN 3
Thermal Resistance 8-Lead SOIC θJA 160 °C/W See Thermal Considerations Layout for more information. 6
Thermal Resistance, FR4 PCB θJA 160 ºC/W PCB dielectric FR4 13
Thermal Resistance, Ceramic PCB θJA 120 ºC/W PCB dielectric Ceramic 13

CAD (KiCad official)

  • Symbol: MIC5201-3.3YM
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mic5201-3-3ym-etched.step / mic5201-3-3ym-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic5201-3-3ym.step / mic5201-3-3ym.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (24 pp, sha256 fe433b0f04e61ce2, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF