Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LP3351SOF

LOWPOWER · LED Drivers · SOP-8-EP

LP3351SOF from LOWPOWER, in a SOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GATE output External NMOS gate drive pin, rated −0.3V to +20V to GND.
2 GND power_in Ground; connect all grounds to one uninterrupted ground plane with at least two vias.
3 CS input Current sense input for the inductor current via R7, with OCP threshold 0.33V (IOCP=0.33/R7) and built-in slope compensation, rated −0.3V to +20V.
4 OVP input Over voltage protection sense input connected to an external resistive divider from V+ to GND, with a 2V typical (1.8V to 2.2V) threshold.
5 FB input Regulator feedback input connected to an external sense resistor to set the LED current (ILED=0.21/RFB, VREF 0.21V ±1.5%).
6 COMP output Regulator error amplifier compensation pin, connected to an external Rcomp and Ccomp network (47kΩ and 33nF in the typical circuit).
7 CTRL input Enable and external PWM dimming control input, accepting 100Hz to 1kHz PWM with 1% to 100% duty, logic high 2.6V min, logic low 1V max, 150kΩ internal pull-down.
8 VIN power_in Input supply pin for 8V to 28V operation (absolute maximum 36V), decoupled with a 10μF ceramic capacitor close to the pin.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer LOWPOWER
Package SOP-8-EP
Category Display Modules / LED Drivers / Display Drivers
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Supply Voltage VVLI 8 28 V 5
Input UVLO Threshold VUVLO(VTH) 6 7 8 V VIN Rising 5
Thermal Shutdown Threshold TSD 140 160 180 °C Temperature Rising 5
Internal Oscillator Frequency FOSC 175 200 225 kHz 5
PWM Threshold Voltage, logic high VIH 2.6 V Logic High. 5
PWM Threshold Voltage, logic low VIL 1 V Logic Low 5
Reference Voltage tolerance VREF -1.5 1.5 % Reference voltage at non-inverting input. 5
Transconductance of EA Gm 80 100 120 uA/V 5
Output Source Current ISource 24 30 36 uA 5
Output Sink Current ISink 48 60 72 uA 5
Over Voltage Protection threshold VOVP 1.8 2 2.2 V Threshold of OVP 5
VIN Supply Current, Sleep Current IQ 310 400 uA Sleep Current 5
VIN Supply Current, Operation Current IQ 2.5 3 mA Operation Current 5
VIN to GND -0.3 36 V 4
GATE, CS, FB, COMP, OVP, CTRL to GND -0.3 20 V 4
Operating Junction Temperature Range TJ -40 150 °C 4
Operation Ambient Temperature Range -20 85 °C 4
Storage Temperature Range -65 150 °C 4
Maximum Soldering Temperature 260 °C at leads, 10sec 4
Maximum Junction Temperature 150 °C 4
UVLO Threshold Hysteresis VUVLO(HYS) 500 mV Falling Hysteresis 5
Thermal Shutdown Hysteresis ΔTSD 20 °C 5
Reference Voltage VREF 0.21 V Reference voltage at non-inverting input. 5
Open Loop Voltage Gain Am 70 dB 5
Pull Down Resistor RPull_Low 150 kΩ 5
Over Current Protection threshold VOCP 330 mV duty=90% 5
Fault Trigger Duration 50 ms 5
Connect detect time Tdet 1 ms 5
SCP Threshold, normal operation VOVP_UV 0.2 V Normal Operation 5
SCP Threshold, system startup VOVP_UV 100 mV System Startup 5
Thermal resistance, junction-to-ambient SOP-8 θJA 112 °C/W 4
Thermal resistance, junction-to-case SOP-8 θJC 39 °C/W 4

CAD (KiCad official)

  • Symbol: LP3351SOF
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: SOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: lp3351sof-etched.step / lp3351sof-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp3351sof.step / lp3351sof.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LOWPOWER datasheet (7 pp, sha256 4bccd9d75f96d0fc, retrieved 2026-11-04, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF