3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX6225ACSA+T
Maxim Integrated · Voltage References · SOIC-8
MAX6225ACSA+T from Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | I.C. | unconnected | Internally connected pin; the datasheet states do not use it. |
| 2 | IN | power_in | Positive power-supply input; the electrical characteristics specify VIN of 8V to 36V. |
| 3 | NR | passive | Noise-reduction pin for an optional 1µF capacitor to GND for wideband noise reduction; leave open if not used, with an absolute maximum rating of -0.3V to +6V. |
| 4 | GND | power_in | Ground reference for all voltages in the datasheet. |
| 5 | TRIM | input | External trim input allowing ±1% output adjustment via a 10kΩ potentiometer between OUT and GND; leave open if not used, with an absolute maximum rating of -0.3V to +12V. |
| 6 | OUT | power_out | Voltage reference output, with an absolute maximum rating of -0.3V to +12V and continuous short-circuit tolerance to GND for VIN ≤ 12V. |
| 7 | I.C. | unconnected | Internally connected pin; the datasheet states do not use it. |
| 8 | I.C. | unconnected | Internally connected pin; the datasheet states do not use it. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VIN | 8 | 36 | V | C, E, M | 2 | |
| Output Voltage (MAX6225A) | VOUT | 2.499 | 2.5 | 2.501 | V | +25°C | 2 |
| Output Voltage Temperature Coefficient (MAX6225AC_A) | TCVOUT | 1 | 2 | ppm/°C | C | 2 | |
| Line Regulation 8V≤VIN≤10V | ΔVOUT/ΔVIN | 10 | 18 | ppm/V | +25°C | 2 | |
| Line Regulation 8V≤VIN≤10V | ΔVOUT/ΔVIN | 30 | ppm/V | C | 2 | ||
| Line Regulation 10V≤VIN≤36V | ΔVOUT/ΔVIN | 2 | 5 | ppm/V | +25°C | 2 | |
| Line Regulation 10V≤VIN≤36V | ΔVOUT/ΔVIN | 7 | ppm/V | C | 2 | ||
| Load Regulation Sourcing | ΔVOUT/ΔIOUT | 1 | 6 | ppm/mA | Sourcing: 0mA ≤ IOUT ≤ 15mA, C | 3 | |
| Load Regulation Sinking | ΔVOUT/ΔIOUT | 1 | 6 | ppm/mA | Sinking: -15mA ≤ IOUT ≤ 0mA, C | 3 | |
| Supply Current | IIN | 1.8 | 2.7 | mA | +25µC | 3 | |
| Supply Current | IIN | 3 | mA | C, E, M | 3 | ||
| Trim-Adjustment Range | ΔVOUT | -25 | 15 | 25 | mV | Figure 1, C, E, M | 3 |
| Turn-On Settling Time | tON | 5 | µs | To ±0.01% of final value, +25°C | 3 | ||
| Output Noise Voltage 0.1Hz to 10Hz | en | 1.5 | µVp-p | 0.1Hz ≤ f ≤ 10Hz, +25°C | 3 | ||
| Output Noise Voltage 10Hz to 1kHz | en | 1.3 | 2.8 | µVRMS | 10Hz ≤ f ≤ 1kHz, +25°C | 3 | |
| Temperature Hysteresis | 20 | ppm | +25°C | 3 | |||
| Long-Term Stability | ΔVOUT/Δt | 20 | ppm/1000h | +25°C | 3 | ||
| IN Pin Voltage | VIN | -0.3 | 40 | V | Voltages referenced to GND | 2 | |
| OUT and TRIM Pin Voltage | VOUT | -0.3 | 12 | V | Voltages referenced to GND | 2 | |
| NR Pin Voltage | -0.3 | 6 | V | Voltages referenced to GND | 2 | ||
| Operating Temperature Range (MAX62__C_A) | TA | 0 | 70 | °C | C grade | 2 | |
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 |
CAD (KiCad official)
- Symbol:
MAX6225ACSA+T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
max6225acsa-t-etched.step/max6225acsa-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max6225acsa-t.step/max6225acsa-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Maxim Integrated datasheet (11 pp, sha256
e48e2becce84ff51, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).