Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

F280021PTQR

Texas Instruments · Digital Signal Processors / Controllers (DSPs/DSCs) · LQFP-48(7x7)

F280021PTQR from Texas Instruments, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GPIO29 bidirectional General-purpose I/O 29 with mux options including SCIA_TX, EPWM7_B, ERRORSTS (needs external pull-down when used) and HIC_NCS.
2 GPIO28 bidirectional General-purpose I/O 28 with mux options including SCIA_RX, EPWM7_A, ERRORSTS (needs external pull-down when used) and HIC_NOE.
3 XRSn bidirectional Open-drain device reset input and watchdog reset output with internal pull-up; place 2.2kΩ to 10kΩ to VDDIO and at most 100nF to VSS.
4 A6,C6 input Analog input shared by A6 and C6 (also CMP1_HP2/LP2, CMP3_HP0/LP0, AIO228/AIO226, HIC_A0/HIC_A1).
5 A3,C5,VDAC input ADC-A input 3 / ADC-C input 5 / optional external CMPSS DAC reference with a non-removable internal capacitor to VSSA; place at least 1µF when used as VDAC.
6 A2,C9 input ADC-A input 2 / ADC-C input 9, also CMP1_HP0/LP0 and AIO224.
7 A15,C7 input ADC-A input 15 / ADC-C input 7, also CMP1_HP3/HN0/LP3/LN0 and AIO233.
8 A11,C0 input ADC-A input 11 / ADC-C input 0, also CMP1_HP1/HN1/LP1/LN1 and AIO237.
9 A5,C2 input ADC-A input 5 / ADC-C input 2, also CMP3_HP1/HN1/LP1/LN1 and AIO244.
10 A1 input Analog input 1, also CMP1_HP4/LP4 and AIO232.
11 A0,C15 input ADC-A input 0 / ADC-C input 15, also CMP3_HP2/LP2 and AIO231.
12 VREFHI input ADC high reference voltage, driven externally or by the device in internal-reference mode; place at least 2.2µF between VREFHI and VREFLO close to the device.
13 VREFLO input ADC low reference voltage.
14 A12,C1 input ADC-A input 12 / ADC-C input 1, also CMP2/CMP4 inputs and AIO238.
15 A7,C3 input ADC-A input 7 / ADC-C input 3, also CMP4_HP1/HN1/LP1/LN1 and AIO245.
16 A8,C11 input ADC-A input 8 / ADC-C input 11, also CMP2_HP4/CMP4_HP4 and AIO241.
17 VSSA power_in Analog ground.
18 VDDA power_in 3.3V analog supply; place a decoupling capacitor of at least 2.2µF on each pin.
19 A4,C14 input ADC-A input 4 / ADC-C input 14, also CMP2/CMP4 inputs and AIO225.
20 A9,C8 input ADC-A input 9 / ADC-C input 8, also CMP2_HP2/CMP4_HP0 and AIO227.
21 A10,C10 input ADC-A input 10 / ADC-C input 10, also CMP2_HP3/HN0/LP3/LN0 and AIO230.
22 VSS power_in Digital ground; must be connected to board ground.
23 GPIO13 bidirectional General-purpose I/O 13 with mux options including EPWM7_B, EQEP1_INDEX, PMBUSA_ALERT and LINB_RX.
24 GPIO12 bidirectional General-purpose I/O 12 with mux options including EPWM7_A, EQEP1_STROBE, PMBUSA_CTL and LINB_TX.
25 GPIO33 bidirectional General-purpose I/O 33 with mux options including I2CA_SCL, SPIB_STE, LINA_RX and CANA_RX.
26 GPIO16 bidirectional General-purpose I/O 16 with mux options including SPIA_SIMO, EPWM5_A, SCIA_TX and XCLKOUT.
27 GPIO24 bidirectional General-purpose I/O 24 with mux options including OUTPUTXBAR1, EQEP2_A, SPIB_SIMO and ERRORSTS (needs external pull-down when used).
28 TCK input JTAG test clock with internal pull-up.
29 GPIO37/TDO bidirectional GPIO37 with default mux JTAG TDO; tri-stated without JTAG activity, so enable internal pull-up or add an external pull-up.
30 TMS bidirectional JTAG test mode select with internal pull-up; add an external pull-up (2.2kΩ recommended) to VDDIO to hold JTAG in reset during normal operation.
31 GPIO35/TDI bidirectional GPIO35 with default mux JTAG TDI; enable internal pull-up or add an external pull-up to avoid a floating input.
32 GPIO32 bidirectional General-purpose I/O 32 with mux options including I2CA_SDA, SPIB_CLK, LINA_TX and CANA_TX; default boot-mode select pin 0.
33 GPIO18_X2 bidirectional General-purpose I/O 18 or crystal oscillator output X2 (ALT); mux includes SPIA_CLK, CANA_RX and XCLKOUT.
34 GPIO19_X1 bidirectional General-purpose I/O 19 or crystal/single-ended 3.3V clock input X1 (ALT); mux includes SPIA_STE, CANA_TX and LINB_RX.
35 VDDIO power_in 3.3V digital I/O supply.
36 VDD power_in 1.2V digital logic supply pin, powered by the internal VREG, requiring decoupling.
37 VSS power_in Digital ground; must be connected to board ground.
38 GPIO4 bidirectional General-purpose I/O 4 with mux options including EPWM3_A, OUTPUTXBAR3, CANA_TX and SPIB_CLK.
39 GPIO3 bidirectional General-purpose I/O 3 with mux options including EPWM2_B, PMBUSA_SCL, SPIA_CLK, SCIA_RX and CANA_RX.
40 GPIO2 bidirectional General-purpose I/O 2 with mux options including EPWM2_A, PMBUSA_SDA, SPIA_SIMO, SCIA_TX and CANA_TX.
41 GPIO1 bidirectional General-purpose I/O 1 with mux options including EPWM1_B, I2CA_SCL, SPIA_SOMI and CLB_OUTPUTXBAR7.
42 GPIO0 bidirectional General-purpose I/O 0 with mux options including EPWM1_A, I2CA_SDA, SPIA_STE and FSIRXA_CLK.
43 GPIO7 bidirectional General-purpose I/O 7 with mux options including EPWM4_B, OUTPUTXBAR5, EQEP1_B and SPIB_SIMO.
44 VSS power_in Digital ground; must be connected to board ground.
45 VDD power_in 1.2V digital logic supply pin, powered by the internal VREG, requiring decoupling.
46 VDDIO power_in 3.3V digital I/O supply.
47 GPIO5 bidirectional General-purpose I/O 5 with mux options including EPWM3_B, OUTPUTXBAR3, CANA_RX and SPIA_STE.
48 GPIO6 bidirectional General-purpose I/O 6 with mux options including EPWM4_A, OUTPUTXBAR4, SYNCOUT and EQEP1_A.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package LQFP-48(7x7)
Category Single Chip Microcomputer/Microcontroller
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
电源电压 VDDIO,以 VSS 为基准 VDDIO -0.3 4.6 V 以 VSS 为基准 51
电源电压 VDDA,以 VSSA 为基准 VDDA -0.3 4.6 V 以 VSSA 为基准 51
输入电压 (3.3V) VIN -0.3 4.6 V 51
输出电压 VO -0.3 4.6 V 51
输入钳位电流 - 每个引脚 IIK -20 20 mA VIN < VSS/VSSA 或 VIN > VDDIO/VDDA 51
输入钳位电流 - 所有输入总计 IIKTOTAL -20 20 mA VIN < VSS/VSSA 或 VIN > VDDIO/VDDA 51
输出电流 数字输出(每引脚) IOUT -20 20 mA 51
自然通风温度 TA -40 125 °C 51
工作结温 TJ -40 150 °C 51
贮存温度 Tstg -65 150 °C 51
静电放电 人体放电模型 (HBM) V(ESD) -2000 2000 V ANSI/ESDA/JEDEC JS-001,所有引脚,48 引脚 PT 封装,商用 51
静电放电 充电器件模型 (CDM) V(ESD) -500 500 V ANSI/ESDA/JEDEC JS-002,所有引脚,48 引脚 PT 封装,商用 51
器件电源电压 VDDIO 和 VDDA(启用内部 BOR) VDDIO, VDDA 3.3 3.63 V 启用内部 BOR;最小值为 VBOR-VDDIO(MAX)+VBOR-GB 表达式 52
器件电源电压 VDDIO 和 VDDA(禁用内部 BOR) VDDIO, VDDA 2.8 3.3 3.63 V 禁用内部 BOR 52
VDDIO BOR 保护频带 VBOR-GB 0.1 V 52
结温 TJ -40 145 °C 52
自然通风温度 TA -40 125 °C 52
输出低电平电压 VOL 0.4 V IOL=IOL 最大值 58
输出低电平电压 VOL 0.2 V IOL = 100µA 58
所有输出引脚的高电平输出阻抗 ROH 45 65 100 Ω 58
所有输出引脚的低电平输出阻抗 ROL 45 60 90 Ω 58
高电平输入电压 VIH 2 V 58
低电平输入电压 VIL 0.8 V 58
引脚漏电流 数字输入 ILEAK 0.1 µA 上拉和输出被禁用,0V ≤ VIN ≤ VDDIO 58
VDDIO 欠压复位电压 VBOR-VDDIO 2.81 3 V 58
内部稳压器输出 VVREG 1.14 1.2 1.32 V 58
ADCCLK(源自 PERx.SYSCLK) ADCCLK 5 50 MHz 111
增益误差 外部基准 -5 3 5 LSB 外部基准 112
增益误差 内部基准电压 -45 45 LSB 内部基准电压 112
偏移量误差 -5 2 5 LSB 112
DNL 误差 -1 0.5 1 LSB 112
INL 误差 -2 1 2 LSB 112
以输入为基准的失调电压误差 -20 20 mV 低共模,反相输入设置为 50mV 119
迟滞 1x 4 12 20 LSB 1x 119
迟滞 2x 17 24 33 LSB 2x 119
迟滞 3x 25 36 50 LSB 3x 119
迟滞 4x 30 48 67 LSB 4x 119
静态失调电压误差 -25 25 mV CMPSS DAC 静态 120
静态增益误差 -2 2 FSR 百分比 CMPSS DAC 静态 120
静态 DNL 更正了终点 -1 4 LSB CMPSS DAC 静态 120
静态 INL 更正了终点 -16 16 LSB CMPSS DAC 静态 120
VDAC 负载 6 8 10 kΩ 当 VDAC 为基准时 120
有效低电平输入电压 (PMBus) VIL 0.8 V PMBus 145
有效高电平输入电压 (PMBus) VIH 2.1 V PMBus 145
低电平输出电压 (PMBus) VOL 0.4 V 在 Ipullup = 4mA 时 145
每个引脚上的输入漏电流 (PMBus) Ii -10 10 µA 0.1Vbus < Vi < 0.9Vbus 145
SCL 时钟频率 快速模式 fSCL 10 400 kHz PMBus 快速模式 145
SCL 时钟频率 标准模式 fSCL 10 100 kHz PMBus 标准模式 146

CAD (KiCad official)

  • Symbol: F280021PTQR
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: f280021ptqr-etched.step / f280021ptqr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); f280021ptqr.step / f280021ptqr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (245 pp, sha256 0723d8e3e09e1f8b, retrieved 2026-11-09, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF