component
WL9100P3-30B
Public Made by Adomby adom
WPMtek(Wei Pan Microelectronics) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-89-3L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownWL9100P3-30B
WPMtek(Wei Pan Microelectronics) · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89-3L
WL9100P3-30B from WPMtek(Wei Pan Microelectronics), in a SOT-89-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground; in PCB layout use a large copper area for thermal dissipation and route wide, short ground traces back from the input and output capacitors. |
| 2 | VIN | power_in | Power input accepting 3.0V to 36V (recommended 3.0V to 24V; absolute maximum -0.3V to 40V), decoupled with a ≥1µF ceramic capacitor to GND placed close to the device. |
| 3 | VOUT | power_out | Regulated 3.0V output (±2%) delivering up to 150mA, requiring a ≥10µF ceramic output capacitor (X7R/X5R) to GND for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | WPMtek(Wei Pan Microelectronics) |
| Package | SOT-89-3L |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 3 | 36 | V | 5 | ||
| Quiescent Current | IQ | 1.5 | 3 | µA | VIN = 12V, No Load | 5 | |
| Output Voltage tolerance | VOUT | -2 | 2 | % | VIN = 12V, IOUT = 10mA (VOUT x 0.98 to VOUT x 1.02) | 5 | |
| Output Current | IOUT | 150 | mA | 5 | |||
| Dropout Voltage at 100mA | VDROP | 450 | 550 | mV | IOUT = 100mA, VOUT = VOUTNOM, 0.1V | 5 | |
| Dropout Voltage at 150mA | VDROP | 700 | 800 | mV | VOUT=3.3V, IOUT = 150mA, VOUT = VOUTNOM, 0.1V | 5 | |
| Load Regulation | ΔVLOAD | 0.03 | 0.05 | %/mA | VIN = VOUTNOM + 1V, 1mA ≤ IOUT ≤ 100mA | 5 | |
| Line Regulation | ΔVLINE | 0.01 | 0.02 | %/V | VOUTNOM + 1V ≤ VIN ≤ 24V, IOUT = 1mA | 5 | |
| Current Limit | ILIMIT | 200 | mA | 5 | |||
| Short Current | ISHORT | 90 | mA | 5 | |||
| Thermal Shutdown Temperature | TOTSD | 150 | °C | 5 | |||
| Thermal Shutdown Hysteresis | THYOTSD | 20 | °C | 5 | |||
| Output Noise Voltage | Von | 100 | µVrms | COUT =10uF, IOUT =30mA, BW = 10Hz~100kHz | 5 | ||
| Supply Input Voltage | VIN | -0.3 | 40 | V | 4 | ||
| VOUT to VIN | VOUT_VIN | -35 | -0.3 | V | 4 | ||
| Regulated Output Voltage | VOUT | -0.3 | 6 | V | 4 | ||
| Power Dissipation SOT89-3 | PD | 750 | mW | TA=+25℃, SOT89-3 | 4 | ||
| Thermal Resistance Junction to air SOT89-3 | θJA | 165 | °C/W | SOT89-3 | 4 | ||
| HBM ESD | -4000 | 4000 | V | Human Body Model | 4 | ||
| CDM ESD | -2000 | 2000 | V | Charged Device Mode | 4 | ||
| Machine Mode ESD | 200 | V | Machine Mode | 4 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 4 | ||
| Operating Junction Temperature | TJ | 150 | °C | 4 | |||
| Lead Temperature | TLEAD | 260 | °C | Soldering 10s | 4 | ||
| Operating Ambient Temperature | -40 | 85 | °C | 4 | |||
| Input Voltage | VIN | 3 | 24 | V | 4 | ||
| Output Voltage | VOUT | 1.8 | 5 | V | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | and output capacitors must be back to the WL9100 ground pin using as wide and as short of a copper trace as is practical.Connections using long trace lengths, narrow trace widths, and/or | 8 |
CAD (KiCad official)
- Symbol:
WL9100P3-30B - Footprint:
Package_TO_SOT_SMD:SOT-89-3 - 3D model: SOT-89-3L (KiCad packages3D, STEP)
- 3D model files:
wl9100p3-30b-etched.step/wl9100p3-30b-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);wl9100p3-30b.step/wl9100p3-30b.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: WPMtek(Wei Pan Microelectronics) datasheet (8 pp, sha256
6437b9fd93db9e0e, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).