3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA2734AIDGSR
Texas Instruments · Precision Op Amps · VSSOP-10-0.5mm
OPA2734AIDGSR from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Amplifier A output, rail-to-rail swing within 50mV of the rails and high-impedance when Enable A is low. |
| 2 | -IN A | input | Amplifier A inverting input, common-mode range (V−) − 0.1V to (V+) − 1.5V, current limit to 10mA if beyond the rails by 0.5V or more. |
| 3 | +IN A | input | Amplifier A non-inverting input, common-mode range (V−) − 0.1V to (V+) − 1.5V, current limit to 10mA if beyond the rails by 0.5V or more. |
| 4 | V- | power_in | Negative supply (ground in single-supply use); supply range is 2.7V to 12V total, and the Enable inputs are referenced to this pin. |
| 5 | Enable A | input | Amplifier A enable/shutdown, CMOS input referenced to V−: logic high above (V−)+2V enables, logic low below (V−)+0.8V shuts down, and an open pin enables the amplifier via internal pull-up. |
| 6 | Enable B | input | Amplifier B enable/shutdown, CMOS input referenced to V−: logic high above (V−)+2V enables, logic low below (V−)+0.8V shuts down, and an open pin enables the amplifier via internal pull-up. |
| 7 | +IN B | input | Amplifier B non-inverting input, common-mode range (V−) − 0.1V to (V+) − 1.5V, current limit to 10mA if beyond the rails by 0.5V or more. |
| 8 | -IN B | input | Amplifier B inverting input, common-mode range (V−) − 0.1V to (V+) − 1.5V, current limit to 10mA if beyond the rails by 0.5V or more. |
| 9 | OUT B | output | Amplifier B output, rail-to-rail swing within 50mV of the rails and high-impedance when Enable B is low. |
| 10 | V+ | power_in | Positive supply, 2.7V to 12V operating range (absolute maximum 13.2V), with a 0.1µF capacitor placed closely across the supply pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Amplifiers/Comparators |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | 1 | 5 | µV | 3 | ||
| Offset Voltage vs Temperature | dVOS/dT | 0.01 | 0.05 | µV/°C | 3 | ||
| Offset Voltage vs Power Supply (PSRR) | PSRR | 0.2 | 1.8 | µV/V | VS = 2.7V to 12V, VCM = 0V | 3 | |
| Input Bias Current | IB | -200 | 100 | 200 | pA | VCM = VS/2 | 3 |
| Input Offset Current | IOS | -300 | 200 | 300 | pA | VCM = VS/2 | 3 |
| Common-Mode Rejection Ratio | CMRR | 115 | 130 | dB | (V−) − 0.1V < VCM < (V+) − 1.5V | 3 | |
| Open-Loop Voltage Gain | AOL | 115 | 130 | dB | (V−) + 100mV < VO < (V+) − 100mV | 3 | |
| Voltage Output Swing from Rail | 20 | 50 | mV | RL = 10kΩ | 3 | ||
| Quiescent Current in Shutdown (per amplifier) | IQSD | 4 | 9 | µA | 3 | ||
| Operating Voltage Range | VS | 2.7 | 12 | V | 3 | ||
| Quiescent Current (per amplifier) | IQ | 0.6 | 0.75 | mA | IO = 0 | 3 | |
| Specified Temperature Range | -40 | 85 | °C | 3 | |||
| Operating Temperature Range | -40 | 150 | °C | 3 | |||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Supply Voltage | 13.2 | V | 2 | ||||
| Signal Input Terminals Current | -10 | 10 | mA | 2 | |||
| Operating Temperature | -40 | 150 | °C | 2 | |||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Lead Temperature (soldering) | 300 | °C | soldering, 10s | 2 | |||
| ESD Rating (Human Body Model), OPA735, OPA2734, OPA2735 | 2000 | V | Human Body Model | 2 | |||
| Thermal Resistance, junction-to-ambient (MSOP-8, MSOP-10, SO-8) | JA | 150 | °C/W | MSOP-8, MSOP-10, SO-8 package | 3 |
CAD (KiCad official)
- Symbol:
OPA2734AIDGSR - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
opa2734aidgsr-etched.step/opa2734aidgsr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa2734aidgsr.step/opa2734aidgsr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
4f28e5b78b0e04db, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).