component
AD8615AUJZ-REEL
Public Made by Adomby adom
Analog Devices Precision Op Amps, TSOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAD8615AUJZ-REEL
Analog Devices · Precision Op Amps · TSOT-23-5
AD8615AUJZ-REEL from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output, which swings rail-to-rail and is rated for ±150 mA output current at VS = 5 V (±50 mA at VS = 2.7 V). |
| 2 | V- | power_in | Negative supply rail; the part is specified for single-supply operation from 2.7 V to 5 V, with a 6 V absolute maximum supply voltage. |
| 3 | +IN | input | Non-inverting input whose common-mode range extends from 0 V to the supply (VS), with the input voltage absolute maximum limited to GND to VS. |
| 4 | -IN | input | Inverting input whose voltage must stay within GND to VS (absolute maximum rating), and the amplifier is immune to phase reversal. |
| 5 | V+ | power_in | Positive supply rail; the part is specified for 2.7 V to 5.0 V single supplies, with a 6 V absolute maximum supply voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage, AD8615 | VOS | 23 | 100 | µV | 3 | ||
| Input offset voltage, common-mode range (row label blank in source) | 80 | 500 | µV | VCM = 0 V to 5 V | 3 | ||
| Input offset voltage over temperature (row label blank in source) | 800 | µV | −40°C < TA < +125°C | 3 | |||
| Offset voltage drift, AD8615 | ∆VOS/∆T | 3 | 10 | µV/°C | 3 | ||
| Input bias current | IB | 0.2 | 1 | pA | 3 | ||
| Input bias current over temperature | IB | 50 | pA | −40°C < TA < +85°C | 3 | ||
| Input bias current over temperature | IB | 550 | pA | −40°C < TA < +125°C | 3 | ||
| Input offset current | IOS | 0.1 | 0.5 | pA | 3 | ||
| Input offset current over temperature | IOS | 50 | pA | −40°C < TA < +85°C | 3 | ||
| Input offset current over temperature | IOS | 250 | pA | −40°C < TA < +125°C | 3 | ||
| Input voltage range | 0 | 5 | V | 3 | |||
| Common-mode rejection ratio | CMRR | 80 | 100 | dB | VCM = 0 V to 4.5 V | 3 | |
| Large signal voltage gain | AVO | 105 | 1500 | V/mV | RL = 2 kΩ, VO = 0.5 V to 5 V | 3 | |
| Output voltage high | VOH | 4.98 | 4.99 | V | IL = 1 mA | 3 | |
| Output voltage high | VOH | 4.88 | 4.92 | V | IL = 10 mA | 3 | |
| Output voltage high over temperature | VOH | 4.7 | V | −40°C < TA < +125°C | 3 | ||
| Output voltage low | VOL | 7.5 | 15 | mV | IL = 1 mA | 3 | |
| Output voltage low | VOL | 70 | 100 | mV | IL = 10 mA | 3 | |
| Output voltage low over temperature | VOL | 200 | mV | −40°C < TA < +125°C | 3 | ||
| Output current | IOUT | -150 | 150 | mA | 3 | ||
| Power supply rejection ratio | PSRR | 70 | 90 | dB | VS = 2.7 V to 5.5 V | 3 | |
| Supply current per amplifier | ISY | 1.7 | 2 | mA | VO = 0 V | 3 | |
| Supply current per amplifier over temperature | ISY | 2.5 | mA | −40°C < TA < +125°C | 3 | ||
| Settling time | tS | 0.5 | µs | To 0.01% | 3 | ||
| Input capacitance, differential | CDIFF | 2.5 | pF | 3 | |||
| Input capacitance, common-mode | CCM | 6.7 | pF | 3 | |||
| Closed-loop output impedance | ZOUT | 3 | Ω | f = 1 MHz, AV = 1 | 3 | ||
| Slew rate | SR | 12 | V/µs | RL = 2 kΩ | 3 | ||
| Gain bandwidth product | GBP | 24 | MHz | 3 | |||
| Phase margin | Øm | 63 | Degrees | 3 | |||
| Peak-to-peak noise | en p-p | 2.4 | µV | 0.1 Hz to 10 Hz | 3 | ||
| Voltage noise density | en | 10 | nV/√Hz | f = 1 kHz | 3 | ||
| Voltage noise density | en | 7 | nV/√Hz | f = 10 kHz | 3 | ||
| Current noise density | in | 0.05 | pA/√Hz | f = 1 kHz | 3 | ||
| Channel separation | CS | -115 | dB | f = 10 kHz | 3 | ||
| Channel separation | CS | -110 | dB | f = 100 kHz | 3 | ||
| Single-supply operating voltage | 2.7 | 5 | V | Single-supply operation (features list) | 1 | ||
| Operating temperature range | -40 | 125 | °C | 5 | |||
| Supply voltage | 6 | V | 5 | ||||
| Differential input voltage | -6 | 6 | V | 5 | |||
| Storage temperature range | -65 | 150 | °C | 5 | |||
| Lead temperature | 300 | °C | Soldering, 60 sec | 5 | |||
| Junction temperature | 150 | °C | 5 | ||||
| Thermal resistance, junction-to-ambient, 5-lead TSOT-23 | θJA | 207 | °C/W | 5 | |||
| Thermal resistance, junction-to-case, 5-lead TSOT-23 | θJC | 61 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
AD8615AUJZ-REEL - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ad8615aujz-reel-etched.step/ad8615aujz-reel-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad8615aujz-reel.step/ad8615aujz-reel.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
771c551ea91aca40, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).