Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM32F303CCT6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)

STM32F303CCT6 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Backup power supply for the RTC, the 32 kHz external oscillator and the backup registers, powered through an internal switch when VDD is not present, operating range 1.65 V to 3.6 V.
2 PC13 bidirectional Standard 3.3 V I/O (TC) shared with TIM1_CH1N alternate function and WKUP2/RTC_TAMP1/RTC_TS/RTC_OUT additional functions; supplied through the backup power switch so in output mode it is limited to 2 MHz with a max 30 pF load and must not be used as a current source (note 2).
3 PC14-OSC32_IN bidirectional Standard 3.3 V I/O (TC) that can be used as OSC32_IN for the 32.768 kHz RTC crystal; supplied through the backup power switch, output mode limited to 2 MHz/30 pF load (note 2).
4 PC15-OSC32_OUT bidirectional Standard 3.3 V I/O (TC) that can be used as OSC32_OUT for the 32.768 kHz RTC crystal; supplied through the backup power switch, output mode limited to 2 MHz/30 pF load (note 2).
5 PF0-OSC_IN bidirectional 5 V-tolerant FM+ capable I/O (FTf) usable as the main 4-32 MHz oscillator OSC_IN, alternate functions TIM1_CH3N and I2C2_SDA.
6 PF1-OSC_OUT bidirectional 5 V-tolerant FM+ capable I/O (FTf) usable as the main 4-32 MHz oscillator OSC_OUT, alternate function I2C2_SCL.
7 NRST bidirectional Bidirectional reset pin with an embedded weak pull-up resistor (typ. 40 kΩ); active-low device reset input and internal reset output.
8 VSSA/VREF- power_in Analog ground and negative voltage reference supply pin for the ADCs and other analog blocks.
9 VDDA/VREF+ power_in Analog power supply/positive reference voltage pin, range 2.0 V to 3.6 V (2.4 V to 3.6 V if DAC/OPAMP used); on the 48-pin package VREF+ is internally tied to VDDA (note 3) and must be ≥ VDD, arriving before or with VDD.
10 PA0 bidirectional 3.3 V ADC-connected I/O (TTa, fast ADC channel note 4) with alternate functions USART2_CTS, TIM2_CH1_ETR, TIM8_BKIN, TIM8_ETR, TSC_G1_IO1, COMP1_OUT and additional functions ADC1_IN1, COMP1_INM, RTC_TAMP2, WKUP1, COMP7_INP.
11 PA1 bidirectional 3.3 V ADC-connected I/O (TTa, fast ADC channel note 4) with alternate functions USART2_RTS_DE, TIM2_CH2, TSC_G1_IO2, TIM15_CH1N, RTC_REFIN and additional functions ADC1_IN2, COMP1_INP, OPAMP1_VINP, OPAMP3_VINP.
12 PA2 bidirectional 3.3 V ADC-connected I/O (TTa, fast ADC channel and reduced touch-sensing sensitivity notes 4,5) with alternate functions USART2_TX, TIM2_CH3, TIM15_CH1, TSC_G1_IO3, COMP2_OUT and additional functions ADC1_IN3, COMP2_INM, OPAMP1_VOUT.
13 PA3 bidirectional 3.3 V ADC-connected I/O (TTa, fast ADC channel note 4) with alternate functions USART2_RX, TIM2_CH4, TIM15_CH2, TSC_G1_IO4 and additional functions ADC1_IN4, OPAMP1_VINP, COMP2_INP, OPAMP1_VINM.
14 PA4 bidirectional 3.3 V ADC-connected I/O (TTa, fast ADC channel and reduced touch-sensing sensitivity notes 4,5) with alternate functions SPI1_NSS/SPI3_NSS/I2S3_WS, USART2_CK, TSC_G2_IO1, TIM3_CH2 and additional functions ADC2_IN1, DAC1_OUT1, OPAMP4_VINP plus COMP1-7_INM inputs.
15 PA5 bidirectional 3.3 V ADC-connected I/O (TTa, fast ADC channel and reduced touch-sensing sensitivity notes 4,5) with alternate functions SPI1_SCK, TIM2_CH1_ETR, TSC_G2_IO2 and additional functions ADC2_IN2, DAC1_OUT2, OPAMP1/2/3_VINP/VINM and COMP1-7_INM.
16 PA6 bidirectional 3.3 V ADC-connected I/O (TTa, fast ADC channel and reduced touch-sensing sensitivity notes 4,5) with alternate functions SPI1_MISO, TIM3_CH1, TIM8_BKIN, TIM1_BKIN, TIM16_CH1, COMP1_OUT, TSC_G2_IO3 and additional functions ADC2_IN3, OPAMP2_VOUT.
17 PA7 bidirectional 3.3 V ADC-connected I/O (TTa, fast ADC channel note 4) with alternate functions SPI1_MOSI, TIM3_CH2, TIM17_CH1, TIM1_CH1N, TIM8_CH1N, TSC_G2_IO4, COMP2_OUT and additional functions ADC2_IN4, COMP2_INP, OPAMP2_VINP, OPAMP1_VINP.
18 PB0 bidirectional 3.3 V ADC-connected I/O (TTa) with alternate functions TIM3_CH3, TIM1_CH2N, TIM8_CH2N, TSC_G3_IO2 and additional functions ADC3_IN12, COMP4_INP, OPAMP3_VINP, OPAMP2_VINP.
19 PB1 bidirectional 3.3 V ADC-connected I/O (TTa, reduced touch-sensing sensitivity notes 4,5) with alternate functions TIM3_CH4, TIM1_CH3N, TIM8_CH3N, COMP4_OUT, TSC_G3_IO3 and additional functions ADC3_IN1, OPAMP3_VOUT.
20 PB2 bidirectional 3.3 V ADC-connected I/O (TTa) with alternate function TSC_G3_IO4 and additional functions ADC2_IN12, COMP4_INM, OPAMP3_VINM.
21 PB10 bidirectional 3.3 V ADC-connected I/O (TTa) with alternate functions USART3_TX, TIM2_CH3, TSC_SYNC and additional functions COMP5_INM, OPAMP4_VINM, OPAMP3_VINM.
22 PB11 bidirectional 3.3 V ADC-connected I/O (TTa) with alternate functions USART3_RX, TIM2_CH4, TSC_G6_IO1 and additional functions COMP6_INP, OPAMP4_VINP.
23 VSS power_in Digital ground supply pin.
24 VDD power_in Digital power supply pin, operating range 2.0 V to 3.6 V.
25 PB12 bidirectional 3.3 V ADC-connected I/O (TTa, reduced touch-sensing sensitivity notes 4,5) with alternate functions SPI2_NSS/I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, TSC_G6_IO2 and additional functions ADC4_IN3, COMP3_INM, OPAMP4_VOUT.
26 PB13 bidirectional 3.3 V ADC-connected I/O (TTa, fast ADC channel note 4) with alternate functions SPI2_SCK/I2S2_CK, USART3_CTS, TIM1_CH1N, TSC_G6_IO3 and additional functions ADC3_IN5, COMP5_INP, OPAMP4_VINP, OPAMP3_VINP.
27 PB14 bidirectional 3.3 V ADC-connected I/O (TTa, fast ADC channel note 4) with alternate functions SPI2_MISO/I2S2ext_SD, USART3_RTS_DE, TIM1_CH2N, TIM15_CH1, TSC_G6_IO4 and additional functions COMP3_INP, ADC4_IN4, OPAMP2_VINP.
28 PB15 bidirectional 3.3 V ADC-connected I/O (TTa, fast ADC channel note 4) with alternate functions SPI2_MOSI/I2S2_SD, TIM1_CH3N, RTC_REFIN, TIM15_CH1N, TIM15_CH2 and additional functions ADC4_IN5, COMP6_INM.
29 PA8 bidirectional 5 V-tolerant I/O (FT) with alternate functions I2C2_SMBA, I2S2_MCK, USART1_CK, TIM1_CH1, TIM4_ETR, MCO (main clock output) and COMP3_OUT.
30 PA9 bidirectional 5 V-tolerant FM+ capable I/O (FTf) with alternate functions I2C2_SCL, I2S3_MCK, USART1_TX, TIM1_CH2, TIM2_CH3, TIM15_BKIN, TSC_G4_IO1 and COMP5_OUT.
31 PA10 bidirectional 5 V-tolerant FM+ capable I/O (FTf) with alternate functions I2C2_SDA, USART1_RX, TIM1_CH3, TIM2_CH4, TIM8_BKIN, TIM17_BKIN, TSC_G4_IO2 and COMP6_OUT.
32 PA11 bidirectional 5 V-tolerant I/O (FT) with alternate functions USART1_CTS, USB_DM, CAN_RX, TIM1_CH1N, TIM1_CH4, TIM1_BKIN2, TIM4_CH1 and COMP1_OUT.
33 PA12 bidirectional 5 V-tolerant I/O (FT) with alternate functions USART1_RTS_DE, USB_DP, CAN_TX, TIM1_CH2N, TIM1_ETR, TIM4_CH2, TIM16_CH1 and COMP2_OUT.
34 PA13 bidirectional 5 V-tolerant I/O (FT), default SWDIO/JTMS debug function, alternate functions TIM4_CH3, TIM16_CH1N, TSC_G4_IO3 and IR_OUT (infrared transmitter output).
35 VSS power_in Digital ground supply pin.
36 VDD power_in Digital power supply pin, operating range 2.0 V to 3.6 V.
37 PA14 bidirectional 5 V-tolerant FM+ capable I/O (FTf), default SWCLK/JTCK debug function, alternate functions I2C1_SDA, USART2_TX, TIM8_CH2, TIM1_BKIN, TSC_G4_IO4.
38 PA15 bidirectional 5 V-tolerant FM+ capable I/O (FTf), default JTDI debug function, alternate functions I2C1_SCL, SPI1_NSS/SPI3_NSS/I2S3_WS, USART2_RX, TIM1_BKIN, TIM2_CH1_ETR, TIM8_CH1.
39 PB3 bidirectional 5 V-tolerant I/O (FT), default JTDO-TRACESWO debug function, alternate functions SPI3_SCK/I2S3_CK, SPI1_SCK, USART2_TX, TIM2_CH2, TIM3_ETR, TIM4_ETR, TIM8_CH1N, TSC_G5_IO1.
40 PB4 bidirectional 5 V-tolerant I/O (FT), default NJTRST debug function, alternate functions SPI3_MISO/I2S3ext_SD, SPI1_MISO, USART2_RX, TIM3_CH1, TIM16_CH1, TIM17_BKIN, TIM8_CH2N, TSC_G5_IO2.
41 PB5 bidirectional 5 V-tolerant I/O (FT) with alternate functions SPI3_MOSI/I2S3_SD, SPI1_MOSI, I2C1_SMBA, USART2_CK, TIM16_BKIN, TIM3_CH2, TIM8_CH3N, TIM17_CH1.
42 PB6 bidirectional 5 V-tolerant FM+ capable I/O (FTf) with alternate functions I2C1_SCL, USART1_TX, TIM16_CH1N, TIM4_CH1, TIM8_CH1, TSC_G5_IO3, TIM8_ETR, TIM8_BKIN2.
43 PB7 bidirectional 5 V-tolerant FM+ capable I/O (FTf) with alternate functions I2C1_SDA, USART1_RX, TIM3_CH4, TIM4_CH2, TIM17_CH1N, TIM8_BKIN, TSC_G5_IO4.
44 BOOT0 input Dedicated boot memory selection pin sampled at reset (input voltage range 0 to 9 V) that selects boot from user Flash, system memory or embedded SRAM.
45 PB8 bidirectional 5 V-tolerant FM+ capable I/O (FTf) with alternate functions I2C1_SCL, CAN_RX, TIM16_CH1, TIM4_CH3, TIM8_CH2, TIM1_BKIN, TSC_SYNC, COMP1_OUT.
46 PB9 bidirectional 5 V-tolerant FM+ capable I/O (FTf) with alternate functions I2C1_SDA, CAN_TX, TIM17_CH1, TIM4_CH4, TIM8_CH3, IR_OUT, COMP2_OUT.
47 VSS power_in Digital ground supply pin.
48 VDD power_in Digital power supply pin, operating range 2.0 V to 3.6 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-48(7x7)
Category Embedded Processors & Controllers
Pins 48

CAD (KiCad official)

  • Symbol: STM32F303CCT6
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: stm32f303cct6-etched.step / stm32f303cct6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f303cct6.step / stm32f303cct6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (148 pp, sha256 e7a65f330e8fc061, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF