Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS3779ADBVR

Texas Instruments · Monitors & Reset Circuits · SOT-23-6

TPS3779ADBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VDD power_in Supply voltage input: connect a 1.5-V to 6.5-V supply to power the device, with a 0.1-µF ceramic capacitor placed close to the pin (required for VDD < 1.5 V).
2 OUT1 output Output for SENSE1, push-pull on the TPS3779 (driven low when SENSE1 falls below VIT- and high after it rises above VIT+); the TPS3780 open-drain version can be pulled up to 6.5 V independent of VDD and requires a pull-up resistor.
3 OUT2 output Output for SENSE2, push-pull on the TPS3779 (driven low when SENSE2 falls below VIT- and high after it rises above VIT+); the TPS3780 open-drain version can be pulled up to 6.5 V independent of VDD and requires a pull-up resistor.
4 SENSE2 input Monitored-voltage input connected through an external resistor divider; OUT2 is asserted when the voltage at this pin drops below the threshold VIT-, with a recommended sense voltage range of 0 V to 6.5 V.
5 GND power_in Ground reference pin for the device.
6 SENSE1 input Monitored-voltage input connected through an external resistor divider; OUT1 is asserted when the voltage at this pin drops below the threshold VIT-, with a recommended sense voltage range of 0 V to 6.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input supply range VDD 1.5 6.5 V 5
Supply current into VDD pin IDD 2.09 3.72 µA VDD = 3.3 V, no load, -40°C < TJ < 85°C 5
Supply current into VDD pin IDD 5.8 µA VDD = 3.3 V, no load, -40°C < TJ < 125°C 5
Supply current into VDD pin IDD 2.29 4 µA VDD = 6.5 V, no load, -40°C < TJ < 85°C 5
Supply current into VDD pin IDD 6.5 µA VDD = 6.5 V, no load, -40°C < TJ < 125°C 5
Positive-going threshold (VIT+) accuracy VIT+ -1 1 % V(SENSE) rising voltage 5
Negative-going threshold (VIT-) accuracy VIT- -1 1 % V(SENSE) falling voltage 5
Input current I(SENSE) -15 15 nA V(SENSE) = 0 V or VDD 5
Low-level output voltage VOL 0.25 V VDD ≥ 1.2 V, ISINK = 0.4 mA 5
Low-level output voltage VOL 0.3 V VDD ≥ 4.5 V, ISINK = 3.2 mA 5
High-level output voltage (TPS3779 only), limit 0.8 VDD VOH 0.8 V VDD ≥ 1.5 V, ISOURCE = 0.4 mA 5
SENSE (rising) to OUT propagation delay tPD(r) 5.5 µs SENSE transitions between 0 V and 1.3 V 6
SENSE (falling) to OUT propagation delay tPD(f) 10 µs SENSE transitions between 0 V and 1.3 V 6
Startup delay tSD 570 µs SENSE transitions between 0 V and 1.3 V 6
Voltage VDD VDD -0.3 7 V 4
Voltage OUT1, OUT2 (TPS3779 only), upper limit VDD + 0.3 V VOUT -0.3 V 4
Voltage SENSE1, SENSE2 VSENSE -0.3 7 V 4
Current OUT1, OUT2 IOUT -20 20 mA 4
Operating junction temperature TJ -40 125 °C 4
Storage temperature Tstg -65 150 °C 4
Power-supply voltage VDD 1.5 6.5 V 4
Sense voltage SENSE1, SENSE2 VSENSE 0 6.5 V 4
Output voltage (TPS3779 only) OUT1, OUT2, upper limit VDD + 0.3 V VOUT 0 V 4
Current OUT1, OUT2 IOUT -5 5 mA 4
Junction temperature TJ -40 25 125 °C 4
Power-on reset voltage V(POR) 0.8 V VOL (max) = 0.2 V, IOL = 15 µA 5
Positive-going input threshold VIT+ 1.194 V V(SENSE) rising voltage 5
Negative-going input threshold, TPS37xxA (0.5% hysteresis) VIT- 1.188 V TPS37xxA (0.5% hysteresis), V(SENSE) falling voltage 5
Input capacitor CIN 0.1 µF 4
Junction-to-ambient thermal resistance (DBV) RθJA 193.9 °C/W 4
Junction-to-case (top) thermal resistance (DBV) RθJC(top) 134.5 °C/W 4
Junction-to-board thermal resistance (DBV) RθJB 39 °C/W 4
Junction-to-top characterization parameter (DBV) ψJT 30.4 °C/W 4
Junction-to-board characterization parameter (DBV) ψJB 38.5 °C/W 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TPS3779ADBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tps3779adbvr-etched.step / tps3779adbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps3779adbvr.step / tps3779adbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (28 pp, sha256 a7da8ded4f330b8d, retrieved 2026-11-13, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF