Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT6233CS6#TRMPBF

Analog Devices · Operational Amplifier · TSOT-23-6

LT6233CS6#TRMPBF from Analog Devices, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Amplifier output, which swings within 50mV of either supply rail; output short-circuit duration is indefinite per the absolute maximum ratings.
2 V- power_in Negative supply; total supply voltage V+ to V- must not exceed 12.6V, and the minimum supply voltage is 3V.
3 +IN input Non-inverting input; common-mode input range is 1.5V to 4V at VS = 5V and 1.15V to 2.65V at VS = 3.3V, and input current is limited to ±40mA.
4 -IN input Inverting input; common-mode input range is 1.5V to 4V at VS = 5V and 1.15V to 2.65V at VS = 3.3V, and input current is limited to ±40mA.
5 ENABLE input Enable input (LT6233 and LT6233-10 only); the amplifier is disabled with ENABLE = V+ - 0.35V (1.2mA max supply current reduced to 10µA max), with logic low at 0.3V max and logic high at V+ - 0.35V min.
6 V+ power_in Positive supply; total supply voltage V+ to V- must not exceed 12.6V, and the minimum supply voltage is 3V.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TSOT-23-6
Category Operational Amplifier/Comparator
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS 100 500 µV LT6233S6, LT6233S6-10 (TA = 25°C, VS = 5V/3.3V) 3
Input Offset Voltage Match (Channel-to-Channel) 80 600 µV Note 6 3
Input Bias Current IB 1.5 3 µA 3
Input Offset Current IOS 0.04 0.3 µA 3
Input Noise Voltage Density en 1.9 3 nV/√Hz f = 10kHz, VS = 5V 3
Large-Signal Gain AVOL 73 140 V/mV VS = 5V, VO = 0.5V to 4.5V, RL = 10k to VS/2 3
Large-Signal Gain AVOL 18 35 V/mV VS = 5V, VO = 0.5V to 4.5V, RL = 1k to VS/2 3
Large-Signal Gain AVOL 53 100 V/mV VS = 3.3V, VO = 0.65V to 2.65V, RL = 10k to VS/2 3
Large-Signal Gain AVOL 11 20 V/mV VS = 3.3V, VO = 0.65V to 2.65V, RL = 1k to VS/2 3
Input Voltage Range VCM 1.5 4 V Guaranteed by CMRR, VS = 5V, 0V 3
Input Voltage Range VCM 1.15 2.65 V Guaranteed by CMRR, VS = 3.3V, 0V 3
Common Mode Rejection Ratio CMRR 90 115 dB VS = 5V, VCM = 1.5V to 4V 3
Common Mode Rejection Ratio CMRR 85 110 dB VS = 3.3V, VCM = 1.15V to 2.65V 3
Power Supply Rejection Ratio PSRR 90 115 dB VS = 3V to 10V 4
Minimum Supply Voltage 3 V Note 7 4
Output Voltage Swing Low VOL 4 40 mV No Load 4
Output Voltage Swing Low VOL 75 180 mV ISINK = 5mA 4
Output Voltage Swing Low VOL 165 320 mV VS = 5V, ISINK = 15mA 4
Output Voltage Swing Low VOL 125 240 mV VS = 3.3V, ISINK = 10mA 4
Output Voltage Swing High VOH 5 50 mV No Load 4
Output Voltage Swing High VOH 85 195 mV ISOURCE = 5mA 4
Output Voltage Swing High VOH 220 410 mV VS = 5V, ISOURCE = 15mA 4
Output Voltage Swing High VOH 165 310 mV VS = 3.3V, ISOURCE = 10mA 4
Short-Circuit Current ISC 40 55 mA VS = 5V 4
Supply Current per Amplifier IS 1.05 1.2 mA 4
Disabled Supply Current per Amplifier 0.2 10 µA ENABLE = V+, 0.35V 4
ENABLE Pin Current IENABLE -75 -25 µA ENABLE = 0.3V 4
Turn-On Time tON 500 ns ENABLE = 5V to 0V, RL = 1k, VS = 5V 4
Slew Rate SR 10 15 V/µs VS = 5V, AV = -1, RL = 1k, VO = 1.5V to 3.5V 4
Full-Power Bandwidth FPBW 1.06 1.6 MHz VS = 5V, VOUT = 3VP-P (Note 9) 4
Large-Signal Gain AVOL 97 180 V/mV VS = ±5V, VO = ±4.5V, RL = 10k 7
Large-Signal Gain AVOL 28 55 V/mV VS = ±5V, VO = ±4.5V, RL = 1k 7
Input Voltage Range VCM -3 4 V VS = ±5V, guaranteed by CMRR 7
Common Mode Rejection Ratio CMRR 90 110 dB VS = ±5V, VCM = -3V to 4V 7
Power Supply Rejection Ratio PSRR 90 115 dB VS = ±1.5V to ±5V 7
Supply Current per Amplifier IS 1.15 1.4 mA VS = ±5V 7
ENABLE Pin Current IENABLE -85 -35 µA VS = ±5V, ENABLE = 0.3V 7
Gain-Bandwidth Product (LT6233) GBW 42 60 MHz Frequency = 1MHz 7
Slew Rate SR 12 17 V/µs VS = ±5V, AV = -1, RL = 1k, VO = -2V to 2V 7
Input Offset Voltage (0°C to 70°C) VOS 600 µV l: 0°C < TA < 70°C; LT6233CS6, LT6233CS6-10; VS = 5V, 0V 5
Input Offset Voltage Drift VOS TC 0.5 3 µV/°C l: 0°C < TA < 70°C; VCM = Half Supply 5
Input Bias Current (0°C to 70°C) IB 3.5 µA l: 0°C < TA < 70°C 5
Input Offset Current (0°C to 70°C) IOS 0.4 µA l: 0°C < TA < 70°C 5
Large-Signal Gain (0°C to 70°C) AVOL 47 V/mV l: 0°C < TA < 70°C; VS = 5V, VO = 0.5V to 4.5V, RL = 10k to VS/2 5
Large-Signal Gain (0°C to 70°C) AVOL 12 V/mV l: 0°C < TA < 70°C; VS = 5V, VO = 0.5V to 4.5V, RL = 1k to VS/2 5
Large-Signal Gain (0°C to 70°C) AVOL 40 V/mV l: 0°C < TA < 70°C; VS = 3.3V, VO = 0.65V to 2.65V, RL = 10k to VS/2 5
Short-Circuit Current (0°C to 70°C) ISC 35 mA l: 0°C < TA < 70°C; VS = 5V 5
Supply Current per Amplifier (0°C to 70°C) IS 1.45 mA l: 0°C < TA < 70°C 5
Turn-Off Time (0°C to 70°C) tOFF 120 µs l: 0°C < TA < 70°C; ENABLE = 0V to 5V, RL = 1k, VS = 5V 5
Slew Rate (0°C to 70°C) SR 9 V/µs l: 0°C < TA < 70°C; VS = 5V, AV = -1, RL = 1k, VO = 1.5V to 3.5V 5
Full-Power Bandwidth (0°C to 70°C) FPBW 955 kHz l: 0°C < TA < 70°C; VS = 5V, VOUT = 3VP-P; LT6233C 5
Input Current -40 40 mA Note 2 (printed ±40mA) 2
Operating Temperature Range -40 85 °C Note 4 2
Specified Temperature Range (LT6233CS6#PBF / #TRPBF) 0 70 °C Order table, C grade; Note 5 3
Junction Temperature TJ 150 °C 2
Storage Temperature Range -65 150 °C 2
Thermal Resistance, Junction-to-Ambient (6-Lead TSOT-23) θJA 250 °C/W S6 package 2

CAD (KiCad official)

  • Symbol: LT6233CS6#TRMPBF
  • Footprint: Package_TO_SOT_SMD:TSOT-23-6
  • 3D model: TSOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: lt6233cs6-trmpbf-etched.step / lt6233cs6-trmpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt6233cs6-trmpbf.step / lt6233cs6-trmpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (24 pp, sha256 b7ee4b9125e1ad94, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF