component
MCP6001RT-E
Public Made by Adomby adom
Microchip Tech Operational Amplifier, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMCP6001RT-E
Microchip Tech · Operational Amplifier · SOT-23-5
MCP6001RT-E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Analog output of the op amp, a low-impedance voltage source. |
| 2 | VDD | power_in | Positive power supply, 1.8V to 6.0V higher than VSS; needs bypass capacitors. |
| 3 | VIN+ | power_in | Noninverting high-impedance CMOS input with low bias current; common-mode range is VDD + 300 mV to VSS - 300 mV. |
| 4 | VIN- | power_in | Inverting high-impedance CMOS input with low bias current. |
| 5 | VSS | power_in | Negative power supply, connected to ground in typical single-supply operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -4.5 | 4.5 | mV | VCM = VSS (Note 1) | 3 | |
| Common-Mode Input Range | VCMR | -0.3 | 0.3 | V | 3 | ||
| Common-Mode Rejection Ratio | CMRR | 60 | 76 | dB | VCM = -0.3V to 5.3V, VDD = 5V | 3 | |
| DC Open-Loop Gain (Large Signal) | AOL | 88 | 112 | dB | VOUT = 0.3V to VDD, 0.3V, VCM =VSS | 3 | |
| Maximum Output Voltage Swing | VOL, VOH | 25 | -25 | mV | VDD = 5.5V, 0.5V input overdrive | 3 | |
| Supply Voltage | VDD | 1.8 | 6 | V | Note 2 | 3 | |
| Quiescent Current per Amplifier | IQ | 50 | 100 | 170 | µA | IO = 0, VDD = 5.5V, VCM = 5V | 3 |
| Input Offset Drift with Temperature | VOS/TA | 2 | µV/°C | TA= -40°C to +125°C, VCM = VSS | 3 | ||
| Power Supply Rejection Ratio | PSRR | 86 | dB | VCM = VSS | 3 | ||
| Input Bias Current | IB | 1 | pA | 3 | |||
| Input Bias Current, Industrial Temperature | IB | 19 | pA | TA = +85°C | 3 | ||
| Input Bias Current, Extended Temperature | IB | 1100 | pA | TA = +125°C | 3 | ||
| Input Offset Current | IOS | 1 | pA | 3 | |||
| Output Short-Circuit Current | ISC | 6 | mA | VDD = 1.8V | 3 | ||
| Output Short-Circuit Current | ISC | 23 | mA | VDD = 5.5V | 3 | ||
| Gain Bandwidth Product | GBWP | 1 | MHz | 4 | |||
| Phase Margin | PM | 90 | ° | G = +1 V/V | 4 | ||
| Slew Rate | SR | 0.6 | V/µs | 4 | |||
| Input Noise Voltage | Eni | 6.1 | µVp-p | f = 0.1 Hz to 10 Hz | 4 | ||
| Input Noise Voltage Density | eni | 28 | nV/Hz | f = 1 kHz | 4 | ||
| Input Noise Current Density | ini | 0.6 | fA/Hz | f = 1 kHz | 4 | ||
| Industrial Temperature Range | TA | -40 | 85 | °C | 4 | ||
| Extended Temperature Range | TA | -40 | 125 | °C | 4 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | Note 1 | 4 | |
| Supply Voltage (absolute maximum) | VDD, VSS | 7 | V | 3 | |||
| Current at Analog Input Pins | VIN+, VIN- | -2 | 2 | mA | 3 | ||
| Analog Inputs Voltage | VIN+, VIN- | -1 | 1 | V | 3 | ||
| All Other Inputs and Outputs Voltage | -0.3 | 0.3 | V | 3 | |||
| Current at Output and Supply Pins | -30 | 30 | mA | 3 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| Storage Temperature Range | TA | -65 | 150 | °C | 4 | ||
| Thermal Resistance, 5-Lead SOT-23 | θJA | 256 | °C/W | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 31 |
CAD (KiCad official)
- Symbol:
MCP6001RT-E - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mcp6001rt-e-etched.step/mcp6001rt-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp6001rt-e.step/mcp6001rt-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (50 pp, sha256
a9b33cface59f4cd, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).