component
ME431ATG
Public Made by Adomby adom
MICRONE Voltage References, TO-92-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownME431ATG
MICRONE · Voltage References · TO-92-3
ME431ATG from MICRONE, in a TO-92-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | The REF pin is the reference input, which the device holds at VREF of 2.5 V typical with reference current IREF of 3 μA typical. |
| 2 | ANODE | power_in | The ANODE pin is the common terminal of the shunt regulator and is connected to the lowest potential of the circuit. |
| 3 | CATHODE | passive | The CATHODE pin sinks cathode current from 1.0 mA to 100 mA with cathode voltage from VREF up to 36 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | TO-92-3 |
| Category | Power Management ICs |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference voltage (0.4% grade) | VREF | 2.49 | 2.5 | 2.51 | V | VKA=VREF, IKA=10mA | 3 |
| Reference voltage (1.0% grade) | VREF | 2.475 | 2.5 | 2.525 | V | VKA=VREF, IKA=10mA | 3 |
| Deviation of reference voltage over-temperature (0 to 70℃) | ΔVREF | 3 | 10 | mV | VKA=VREF, IKA=10mA, 0 to 70℃ | 3 | |
| Deviation of reference voltage over-temperature (-40 to 150℃) | ΔVREF | 3 | 15 | mV | VKA=VREF, IKA=10mA, -40 to 150℃ | 3 | |
| Dynamic impedance | KA / Z / | 0.15 | 0.5 | Ω | VKA=VREF, IKA=1 to 100mA, f≤1.0KHz | 3 | |
| Minimum cathode current for regulation | IKA (MIN) | 0.4 | 1 | mA | VKA=VREF | 3 | |
| Ratio of change in reference voltage to change in cathode voltage (10V to VREF) | ΔVREF/ΔVKA | -0.8 | -2.5 | mV/V | IKA=10mA, ΔVKA=10V to VREF | 3 | |
| Ratio of change in reference voltage to change in cathode voltage (36V to 10V) | ΔVREF/ΔVKA | -0.6 | -1.5 | mV/V | IKA=10mA, ΔVKA=36V to 10V | 3 | |
| Reference current | IREF | 0.7 | 3 | μA | IKA=10mA, R1=10KΩ, R2=∝ | 3 | |
| Deviation of reference current over full temperature range | ΔIREF | 0.1 | 1.2 | μA | IKA=10mA, R1=10KΩ, R2=∝, TA=40 to 150℃ | 3 | |
| Off-state cathode current | IKA (OFF) | 0.03 | 0.3 | μA | VKA=36V, VREF=0 | 3 | |
| Cathode voltage | VKA | 36 | V | Minimum is VREF | 3 | ||
| Cathode current | IKA | 1 | 100 | mA | 3 | ||
| Operating ambient temperature range | TA | -40 | 125 | ℃ | 3 | ||
| Cathode voltage | VKA | 40 | V | 2 | |||
| Cathode current range (continuous) | IKA | -100 | 130 | mA | continuous | 2 | |
| Reference input current range | IREF | 10 | mA | 2 | |||
| Power dissipation | PD | 770 | mW | TO-92 package | 2 | ||
| Junction temperature | TJ | 160 | ℃ | 2 | |||
| Storage temperature range | TSTG | -65 | 150 | ℃ | 2 | ||
| Package thermal impedance | θJA | 150 | ℃/W | TO-92 package | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | ppa | body, such as exercise equipment, medical equipment, security systems, gas equipment, or any apparatus installed in airplanes and other vehicles, without prior written permission of Nanjing Micro | 11 |
CAD (KiCad official)
- Symbol:
ME431ATG - Footprint:
Package_TO_SOT_THT:TO-92_Inline - 3D model: TO-92-3 (KiCad packages3D, STEP)
- 3D model files:
me431atg-etched.step/me431atg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);me431atg.step/me431atg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MICRONE datasheet (11 pp, sha256
30305689f87e8f4e, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).