component
OPA695IDBVT
Public Made by Adomby adom
Texas Instruments Operational Amplifier, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA695IDBVT
Texas Instruments · Operational Amplifier · SOT-23-6
OPA695IDBVT from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output | output | Amplifier output; the datasheet warns that shorting the output pin directly to the adjacent +VS pin can damage the amplifier, so a series resistor is recommended. |
| 2 | -VS | power_in | Negative power supply; total supply VS = (+VS) - (-VS) must stay within the 5 V to 12 V recommended range and below the 13 V absolute maximum. |
| 3 | Noninverting Input | input | Noninverting input; the input common-mode range is typically ±3.4 V at VS = ±5 V, and the common-mode input impedance is high (450 |
| 4 | Inverting Input | input | Inverting input; this pin has a lower ESD rating (HBM ±500 V) than the other pins (HBM ±1500 V), so handle it with extra care. |
| 5 | DIS | input | Disable control; a logic low below 1.7 V powers the amplifier down to about 160 µA supply current, while a high above 3.5 V or an open pin keeps it enabled. |
| 6 | +VS | power_in | Positive power supply; supply range is 5 V to 12 V (13 V absolute maximum), and the datasheet recommends a 0.1 µF decoupling capacitor placed close to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Total supply voltage VS = (VS+) – (VS–) | VS | 13 | V | 4 | |||
| Differential input voltage | VID | -1.2 | 1.2 | V | 4 | ||
| Continuous input current | IIN | -10 | 10 | mA | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 125 | °C | 4 | ||
| Total supply voltage VS+ – VS- | VS | 5 | 12 | V | 4 | ||
| Operating ambient air temperature | TA | -40 | 25 | 85 | °C | 4 | |
| Open-loop transimpedance gain | ZOL | 45 | 300 | kΩ | VS=±5V, TA=+25°C | 5 | |
| Open-loop transimpedance gain, TA=-40°C to +85°C | ZOL | 41 | kΩ | VS=±5V, TA=-40°C to +85°C | 5 | ||
| Input offset voltage | VOS | -3 | 0.3 | 3 | mV | VS=±5V, VCM=0V | 5 |
| Input offset voltage, TA=-40°C to +85°C | VOS | -4 | 4 | mV | VS=±5V, VCM=0V | 5 | |
| Average input offset voltage drift | -15 | 3 | 15 | μV/°C | VS=±5V, VCM=0V, TA=-40°C to +85°C | 5 | |
| Non-inverting input bias current | -30 | 13 | 30 | μA | VS=±5V, VCM=0V | 5 | |
| Average non-inverting input bias current drift | 60 | 180 | nA/°C | VS=±5V, VCM=0V, TA=-40°C to +85°C | 5 | ||
| Inverting input bias current | -60 | 5 | 60 | μA | VS=±5V, VCM=0V | 5 | |
| Average inverting input bias current drift | -160 | 16 | 160 | nA/°C | VS=±5V, VCM=0V, TA=-40°C to +85°C | 5 | |
| Common-mode input range | CMIR | -3.1 | 3.4 | V | VS=±5V | 5 | |
| Common-mode input range, TA=-40°C to +85°C | CMIR | -3 | V | VS=±5V, TA=-40°C to +85°C | 5 | ||
| Common-mode rejection ratio | CMRR | 51 | 65 | dB | VS=±5V, VCM=0V, ΔVIN=2V | 5 | |
| Common-mode rejection ratio, TA=-40°C to +85°C | CMRR | 50 | dB | VS=±5V, VCM=0V, ΔVIN=2V | 5 | ||
| Output voltage swing | VO | -3.95 | 4.05 | V | VS=±5V, no load | 6 | |
| Output voltage swing, no load, TA=-40°C to +85°C | VO | -3.85 | V | VS=±5V, no load | 6 | ||
| Output voltage swing | VO | -3.65 | 3.75 | V | VS=±5V, RL=100Ω | 6 | |
| Output voltage swing, RL=100Ω, TA=-40°C to +85°C | VO | -3.55 | V | VS=±5V, RL=100Ω | 6 | ||
| Output source current | IO | 90 | 140 | mA | VS=±5V, VO=0V | 6 | |
| Output sink current | IO | -140 | -90 | mA | VS=±5V, VO=0V | 6 | |
| Quiescent current | IQ | 11.7 | 14 | 15.6 | mA | VS=±5V | 6 |
| Quiescent current, TA=-40°C to +85°C | IQ | 10 | 18 | mA | VS=±5V | 6 | |
| Negative power supply rejection ratio | PSRR | 51 | 72 | dB | VS=±5V | 6 | |
| Shutdown quiescent current (+VS) | IQ | 160 | 200 | μA | VS=±5V, VDIS=0V | 6 | |
| Shutdown quiescent current (+VS), TA=-40°C to +85°C | IQ | 210 | μA | VS=±5V, VDIS=0V | 6 | ||
| Enable voltage threshold | 3 | 3.5 | V | VS=±5V | 6 | ||
| Disable voltage threshold | 1.7 | 2.3 | V | VS=±5V | 6 | ||
| DIS control pin input bias current | 95 | 130 | μA | VS=±5V, VDIS=0V | 6 | ||
| DIS control pin input bias current, TA=-40°C to +85°C | 145 | μA | VS=±5V, VDIS=0V | 6 | |||
| Open-loop transimpedance gain | ZOL | 40 | 250 | kΩ | VS=5V, TA=+25°C | 7 | |
| Input offset voltage | VOS | -3 | 0.3 | 3 | mV | VS=5V, VCM=VS/2 | 7 |
| Average input offset voltage drift | -15 | 4 | 15 | μV/°C | VS=5V, VCM=VS/2, TA=-40°C to +85°C | 7 | |
| Non-inverting input bias current | -40 | 15 | 40 | μA | VS=5V, VCM=VS/2 | 7 | |
| Average non-inverting input bias current drift | -170 | 60 | 170 | nA/°C | VS=5V, VCM=VS/2, TA=-40°C to +85°C | 7 | |
| Inverting input bias current | -60 | 5 | 60 | μA | VS=5V, VCM=VS/2 | 7 | |
| Average inverting input bias current drift | -160 | 16 | 160 | nA/°C | VS=5V, VCM=VS/2, TA=-40°C to +85°C | 7 | |
| Common-mode input range (positive) | CMIR | 3.2 | 3.4 | V | VS=5V | 7 | |
| Common-mode input range (negative) | CMIR | 1.6 | 1.8 | V | VS=5V | 7 | |
| Common-mode rejection ratio | CMRR | 51 | 65 | dB | VS=5V, VCM=VS/2, ΔVIN=0.5V | 7 | |
| Output voltage swing (maximum positive), no load | VO | 3.95 | 4.05 | V | VS=5V, no load | 9 | |
| Output voltage swing (minimum positive), no load | VO | 0.9 | 1.05 | V | VS=5V, no load | 9 | |
| Output source current | IO | 70 | 100 | mA | VS=5V, VO=VS/2 | 9 | |
| Output sink current | IO | -100 | -70 | mA | VS=5V, VO=VS/2 | 9 | |
| Quiescent current | IQ | 10.9 | 13 | 14.4 | mA | VS=5V | 9 |
| Shutdown quiescent current (+VS) | IQ | 120 | 160 | μA | VS=5V, VDIS=0V | 9 | |
| Enable voltage threshold | 3.1 | 3.5 | V | VS=5V | 9 | ||
| Disable voltage threshold | 1.7 | 2.4 | V | VS=5V | 9 | ||
| DIS control pin input bias current | 95 | 130 | μA | VS=5V, VDIS=0V | 9 | ||
| Junction-to-ambient thermal resistance (DBV, SOT-23-6) | RθJA | 164 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance (DBV) | RθJC(top) | 80 | °C/W | 4 | |||
| Junction-to-board thermal resistance (DBV) | RθJB | 49 | °C/W | 4 | |||
| Junction-to-top characterization parameter (DBV) | ΨJT | 28 | °C/W | 4 | |||
| Junction-to-board characterization parameter (DBV) | ΨJB | 49 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
OPA695IDBVT - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
opa695idbvt-etched.step/opa695idbvt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa695idbvt.step/opa695idbvt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (66 pp, sha256
593f719ec6b9b39c, retrieved 2026-10-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).