Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MSP430F449IPZR

Texas Instruments · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)

MSP430F449IPZR from Texas Instruments, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DVCC1 power_in Digital supply voltage, positive terminal.
2 P6.3/A3 bidirectional General-purpose digital I/O / analog input a3 to the 12-bit ADC.
3 P6.4/A4 bidirectional General-purpose digital I/O / analog input a4 to the 12-bit ADC.
4 P6.5/A5 bidirectional General-purpose digital I/O / analog input a5 to the 12-bit ADC.
5 P6.6/A6 bidirectional General-purpose digital I/O / analog input a6 to the 12-bit ADC.
6 P6.7/A7/SVSIN bidirectional General-purpose digital I/O / analog input a7 to the 12-bit ADC and analog input to the brownout, supply voltage supervisor.
7 VREF+ power_in Output of the positive terminal of the reference voltage in the ADC.
8 XIN input Input port for crystal oscillator XT1; standard or watch crystals can be connected.
9 XOUT output Output terminal of crystal oscillator XT1.
10 VeREF+ input Input for an external reference voltage to the ADC.
11 VREF-/VeREF- power_in Negative terminal for the ADC reference voltage, either the internal reference voltage or an external applied reference voltage.
12 P5.1/S0 bidirectional General-purpose digital I/O / LCD segment output 0.
13 P5.0/S1 bidirectional General-purpose digital I/O / LCD segment output 1.
14 S2 output LCD segment output 2.
15 S3 output LCD segment output 3.
16 S4 output LCD segment output 4.
17 S5 output LCD segment output 5.
18 S6 output LCD segment output 6.
19 S7 output LCD segment output 7.
20 S8 output LCD segment output 8.
21 S9 output LCD segment output 9.
22 S10 output LCD segment output 10.
23 S11 output LCD segment output 11.
24 S12 output LCD segment output 12.
25 S13 output LCD segment output 13.
26 S14 output LCD segment output 14.
27 S15 output LCD segment output 15.
28 S16 output LCD segment output 16.
29 S17 output LCD segment output 17.
30 S18 output LCD segment output 18.
31 S19 output LCD segment output 19.
32 S20 output LCD segment output 20.
33 S21 output LCD segment output 21.
34 S22 output LCD segment output 22.
35 S23 output LCD segment output 23.
36 S24 output LCD segment output 24.
37 S25 output LCD segment output 25.
38 S26 output LCD segment output 26.
39 S27 output LCD segment output 27.
40 S28 output LCD segment output 28.
41 S29 output LCD segment output 29.
42 S30 output LCD segment output 30.
43 S31 output LCD segment output 31.
44 S32 output LCD segment output 32.
45 S33 output LCD segment output 33.
46 P4.7/S34 bidirectional General-purpose digital I/O / LCD segment output 34.
47 P4.6/S35 bidirectional General-purpose digital I/O / LCD segment output 35.
48 P4.5/UCLK1/S36 bidirectional General-purpose digital I/O / external clock input in USART1 UART or SPI mode, clock output in USART1 SPI mode / LCD segment output 36.
49 P4.4/SOMI1/S37 bidirectional General-purpose digital I/O / slave out/master in of USART1 SPI mode / LCD segment output 37.
50 P4.3/SIMO1/S38 bidirectional General-purpose digital I/O / slave in/master out of USART1 SPI mode / LCD segment output 38.
51 P4.2/STE1/S39 bidirectional General-purpose digital I/O / slave transmit enable of USART1 SPI mode / LCD segment output 39.
52 COM0 output LCD common output COM0, used for LCD backplanes.
53 P5.2/COM1 bidirectional General-purpose digital I/O / common output COM1 for LCD backplanes.
54 P5.3/COM2 bidirectional General-purpose digital I/O / common output COM2 for LCD backplanes.
55 P5.4/COM3 bidirectional General-purpose digital I/O / common output COM3 for LCD backplanes.
56 R03 input Input port of the fourth positive (lowest) analog LCD level (V5).
57 P5.5/R13 bidirectional General-purpose digital I/O / input port of the third most positive analog LCD level (V4 or V3).
58 P5.6/R23 bidirectional General-purpose digital I/O / input port of the second most positive analog LCD level (V2).
59 P5.7/R33 bidirectional General-purpose digital I/O / output port of the most positive analog LCD level (V1).
60 DVCC2 power_in Digital supply voltage, positive terminal.
61 DVSS2 power_in Digital supply voltage, negative terminal.
62 P4.1/URXD1 bidirectional General-purpose digital I/O / receive data input for USART1 UART mode.
63 P4.0/UTXD1 bidirectional General-purpose digital I/O / transmit data output for USART1 UART mode.
64 P3.7/TB6 bidirectional General-purpose digital I/O / Timer_B7 CCR6 capture input CCI6A/CCI6B or compare output Out6.
65 P3.6/TB5 bidirectional General-purpose digital I/O / Timer_B7 CCR5 capture input CCI5A/CCI5B or compare output Out5.
66 P3.5/TB4 bidirectional General-purpose digital I/O / Timer_B7 CCR4 capture input CCI4A/CCI4B or compare output Out4.
67 P3.4/TB3 bidirectional General-purpose digital I/O / Timer_B7 CCR3 capture input CCI3A/CCI3B or compare output Out3.
68 P3.3/UCLK0 bidirectional General-purpose digital I/O / external clock input for USART0 UART or SPI mode, clock output for USART0 SPI mode.
69 P3.2/SOMI0 bidirectional General-purpose digital I/O / slave out/master in of USART0 SPI mode.
70 P3.1/SIMO0 bidirectional General-purpose digital I/O / slave in/master out of USART0 SPI mode.
71 P3.0/STE0 bidirectional General-purpose digital I/O / slave transmit enable of USART0 SPI mode.
72 P2.7 bidirectional General-purpose digital I/O.
73 P2.6/CAOUT bidirectional General-purpose digital I/O / Comparator_A output.
74 P2.5/URXD0 bidirectional General-purpose digital I/O / receive data input for USART0 UART mode.
75 P2.4/UTXD0 bidirectional General-purpose digital I/O / transmit data output for USART0 UART mode.
76 P2.3/TB2 bidirectional General-purpose digital I/O / Timer_B7 CCR2 capture input CCI2A/CCI2B or compare output Out2.
77 P2.2/TB1 bidirectional General-purpose digital I/O / Timer_B7 CCR1 capture input CCI1A/CCI1B or compare output Out1.
78 P2.1/TB0 bidirectional General-purpose digital I/O / Timer_B7 CCR0 capture input CCI0A/CCI0B or compare output Out0.
79 P2.0/TA2 bidirectional General-purpose digital I/O / Timer_A capture input CCI2A or compare output Out2.
80 P1.7/CA1 bidirectional General-purpose digital I/O / Comparator_A input.
81 P1.6/CA0 bidirectional General-purpose digital I/O / Comparator_A input.
82 P1.5/TACLK/ACLK bidirectional General-purpose digital I/O / Timer_A clock signal TACLK input / ACLK output (divided by 1, 2, 4, or 8).
83 P1.4/TBCLK/SMCLK bidirectional General-purpose digital I/O / input clock TBCLK for Timer_B7 / submain system clock SMCLK output.
84 P1.3/TBOUTH/SVSOUT bidirectional General-purpose digital I/O / switches all PWM digital output ports to high impedance for Timer_B7 TB0 to TB6 / SVS comparator output.
85 P1.2/TA1 bidirectional General-purpose digital I/O / Timer_A capture input CCI1A or compare output Out1.
86 P1.1/TA0/MCLK bidirectional General-purpose digital I/O / Timer_A capture input CCI0B or MCLK output; TA0 is only an input on this pin; BSL receive.
87 P1.0/TA0 bidirectional General-purpose digital I/O / Timer_A capture input CCI0A or compare output Out0; BSL transmit.
88 XT2OUT output Output terminal of crystal oscillator XT2.
89 XT2IN input Input port for crystal oscillator XT2; only standard crystals can be connected.
90 TDO/TDI bidirectional Test data output port; TDO/TDI carries data output or programming data input.
91 TDI/TCLK input Test data input or test clock input; the device protection fuse is connected to TDI/TCLK.
92 TMS input Test mode select; used as an input port for device programming and test.
93 TCK input Test clock; the clock input port for device programming and test.
94 RST/NMI input Reset input or nonmaskable interrupt input port.
95 P6.0/A0 bidirectional General-purpose digital I/O / analog input a0 to the 12-bit ADC.
96 P6.1/A1 bidirectional General-purpose digital I/O / analog input a1 to the 12-bit ADC.
97 P6.2/A2 bidirectional General-purpose digital I/O / analog input a2 to the 12-bit ADC.
98 AVSS power_in Analog supply voltage, negative terminal; supplies SVS, brownout, oscillator, comparator_A, ADC12, port 1, and LCD resistive divider circuitry.
99 DVSS1 power_in Digital supply voltage, negative terminal.
100 AVCC power_in Analog supply voltage, positive terminal; supplies SVS, brownout, oscillator, comparator_A, ADC12, port 1, and LCD resistive divider circuitry; must not power up prior to DVCC1/DVCC2.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package LQFP-100(14x14)
Category Embedded Processors & Controllers
Pins 100

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage applied at VCC to VSS VCC -0.3 4.1 V 36
Voltage applied to any pin (referenced to VSS; upper limit VCC+0.3 V) -0.3 V referenced to VSS 36
Diode current at any device terminal -2 2 mA 36
Storage temperature, unprogrammed device Tstg -55 150 °C Unprogrammed device 36
Storage temperature, programmed device Tstg -55 85 °C Programmed device 36
Supply voltage during program execution VCC 1.8 3.6 V AVCC = DVCC1 = DVCC2 = VCC 37
Supply voltage during program execution, SVS enabled, PORON=1 VCC 2 3.6 V SVS enabled, PORON=1 37
Supply voltage during flash memory programming VCC 2.7 3.6 V AVCC = DVCC1 = DVCC2 = VCC 37
Operating free-air temperature range TA -40 85 °C 37
LFXT1 crystal frequency, LF mode (watch crystal) f(LFXT1) 32.768 kHz LF selected, XTS_FLL=0, watch crystal 37
LFXT1 crystal frequency, XT1 ceramic resonator f(LFXT1) 450 8000 kHz XT1 selected, XTS_FLL=1, ceramic resonator 37
LFXT1 crystal frequency, XT1 crystal f(LFXT1) 1000 8000 kHz XT1 selected, XTS_FLL=1, crystal 37
XT2 crystal frequency, ceramic resonator f(XT2) 450 8000 kHz ceramic resonator 37
XT2 crystal frequency, crystal f(XT2) 1000 8000 kHz crystal 37
Processor frequency (signal MCLK) f(System) 4.15 MHz VCC = 1.8 V 37
Processor frequency (signal MCLK) f(System) 8 MHz VCC = 3.6 V 37
Active mode supply current I(AM) 280 350 µA f(MCLK)=f(SMCLK)=1 MHz, f(ACLK)=32768 Hz, XTS_FLL=0, SELM=(0,1), TA = −40°C to 85°C, VCC = 2.2 V 38
Active mode supply current I(AM) 420 560 µA f(MCLK)=f(SMCLK)=1 MHz, f(ACLK)=32768 Hz, XTS_FLL=0, SELM=(0,1), TA = −40°C to 85°C, VCC = 3 V 38
Low-power mode LPM0 supply current I(LPM0) 32 45 µA TA = −40°C to 85°C, VCC = 2.2 V 38
Low-power mode LPM0 supply current I(LPM0) 55 70 µA TA = −40°C to 85°C, VCC = 3 V 38
Low-power mode LPM2 supply current I(LPM2) 11 14 µA f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32768 Hz, SCG0=0, TA = −40°C to 85°C, VCC = 2.2 V 38
Low-power mode LPM2 supply current I(LPM2) 17 22 µA f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32768 Hz, SCG0=0, TA = −40°C to 85°C, VCC = 3 V 38
Low-power mode LPM3 supply current I(LPM3) 1.8 2.2 µA f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32768 Hz, SCG0=1, TA = −40°C, VCC = 3 V 38
Low-power mode LPM3 supply current I(LPM3) 1.6 1.9 µA f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32768 Hz, SCG0=1, TA = 25°C, VCC = 3 V 38
Low-power mode LPM3 supply current I(LPM3) 2.5 3.5 µA f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32768 Hz, SCG0=1, TA = 60°C, VCC = 3 V 38
Low-power mode LPM3 supply current I(LPM3) 4.2 7.5 µA f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32768 Hz, SCG0=1, TA = 85°C, VCC = 3 V 38
Low-power mode LPM4 supply current I(LPM4) 0.1 0.5 µA f(MCLK)=0 MHz, f(SMCLK)=0 MHz, f(ACLK)=0 Hz, SCG0=1, TA = −40°C, VCC = 3 V 38
Low-power mode LPM4 supply current I(LPM4) 0.8 1.2 µA f(MCLK)=0 MHz, f(SMCLK)=0 MHz, f(ACLK)=0 Hz, SCG0=1, TA = 60°C, VCC = 3 V 38
Low-power mode LPM4 supply current I(LPM4) 1.9 3.5 µA f(MCLK)=0 MHz, f(SMCLK)=0 MHz, f(ACLK)=0 Hz, SCG0=1, TA = 85°C, VCC = 3 V 38
Positive-going input threshold voltage, Schmitt-trigger ports VIT+ 1.1 1.5 V VCC = 2.2 V 39
Positive-going input threshold voltage, Schmitt-trigger ports VIT+ 1.5 1.9 V VCC = 3 V 39
Negative-going input threshold voltage, Schmitt-trigger ports VIT− 0.4 0.9 V VCC = 2.2 V 39
Negative-going input threshold voltage, Schmitt-trigger ports VIT− 0.9 1.3 V VCC = 3 V 39
Input voltage hysteresis (VIT+ − VIT−) Vhys 0.3 1.1 V VCC = 2.2 V 39
Input voltage hysteresis (VIT+ − VIT−) Vhys 0.5 1 V VCC = 3 V 39
Leakage current, Port P1 Ilkg(P1.x) -50 50 nA Port 1: V(P1.x) 39
Leakage current, Port P2 Ilkg(P2.x) -50 50 nA Port 2: V(P2.x) 39
Leakage current, Port P3 Ilkg(P3.x) -50 50 nA Port 3: V(P3.x), VCC 2.2 V/3 V 39
Leakage current, Port P4 Ilkg(P4.x) -50 50 nA Port 4: V(P4.x), VCC 2.2 V/3 V 39
Leakage current, Port P5 Ilkg(P5.x) -50 50 nA Port 5: V(P5.x) 39
Leakage current, Port P6 Ilkg(P6.x) -50 50 nA Port 6: V(P6.x) 39
Output frequency, Px.y f(Px.y) 5 MHz CL = 20 pF, VCC = 2.2 V 40
Output frequency, Px.y f(Px.y) 7.5 MHz CL = 20 pF, IL = ±1.5 mA, VCC = 3 V 40
Wake-up delay time from LPM3 td(LPM3) 6 µs f = 1 MHz, VCC 2.2 V/3 V 42
RAM retention voltage VRAMh 1.6 V CPU halted 42
Voltage at P5.7/R33 V(33) 2.5 V Voltage at P5.7/R33 42
Comparator_A supply current I(CC) 25 40 µA CAON=1, CARSEL=0, CAREF=0, VCC = 2.2 V 43
Comparator_A supply current I(CC) 45 60 µA CAON=1, CARSEL=0, CAREF=0, VCC = 3 V 43
Voltage @ 0.25 VCC node V(Ref025) 0.23 0.24 0.25 V PCA0=1, CARSEL=1, CAREF=1, no load at P1.6/CA0 and P1.7/CA1, VCC = 2.2 V / 3 V 43
Voltage @ 0.5 VCC node V(Ref050) 0.47 0.48 0.5 V PCA0=1, CARSEL=1, CAREF=2, no load at P1.6/CA0 and P1.7/CA1, VCC = 2.2 V / 3 V 43
Comparator_A reference voltage V(RefVT) V(RefVT) 390 480 540 mV PCA0=1, CARSEL=1, CAREF=3, no load at P1.6/CA0 and P1.7/CA1, VCC = 2.2 V 43
Offset voltage Vp−VS -30 30 mV See Note 2 43
Comparator_A input hysteresis Vhys 0 0.7 1.4 mV CAON = 1 43
POR/brownout delay time td(BOR) 2000 µs 45
POR/brownout hysteresis Vhys(B_IT−) 70 130 180 mV dVCC/dt ≤ 3 V/s 45
Program and erase supply voltage VCC(PGM/ERASE) 2.7 3.6 V 56
Flash Timing Generator frequency fFTG 257 476 kHz 56
Supply current from DVCC during program IPGM 3 5 mA VCC 2.7 V/3.6 V 56
Supply current from DVCC during erase IERASE 3 7 mA VCC 2.7 V/3.6 V 56

CAD (KiCad official)

  • Symbol: MSP430F449IPZR
  • Footprint: Package_QFP:LQFP-100_14x14mm_P0.5mm
  • 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
  • 3D model files: msp430f449ipzr-etched.step / msp430f449ipzr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); msp430f449ipzr.step / msp430f449ipzr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (89 pp, sha256 ff6c7ef212cfbf3f, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF