component

TL061ACP

Public Unreviewed

by Ray

Texas Instruments FET Input Amplifiers, PDIP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentamplifiers-comparatorstl061acp
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

PCB Footprint

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

Datasheet

Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Download PDF
Contents

README

markdown

TL061ACP

Texas Instruments · FET Input Amplifiers · PDIP-8

TL061ACP from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection. Do not connect. On some legacy TL061 revisions this pin was labeled OFFSET N1 (input offset null); leave floating on the current TL061ACP.
2 IN- input Inverting (negative) input of the op-amp. High-impedance JFET input; input bias current typically a few pA at 25°C. Differential input voltage limited to ±30 V.
3 IN+ input Non-inverting (positive) input of the op-amp. High-impedance JFET input; common-mode input voltage range includes VCC+. Input voltage magnitude must not exceed
4 VCC- power_in Negative supply rail. Absolute-maximum -18 V (with respect to the supply midpoint); recommended operating supplies give ±3.5 V to ±18 V dual, or connect to GND for single-supply operation up to 36 V total.
5 NC unconnected No internal connection. Do not connect. On some legacy TL061 revisions this pin was labeled OFFSET N2 (input offset null); leave floating on the current TL061ACP.
6 OUT output Op-amp output. Class-AB, short-circuit protected (unlimited duration, provided dissipation limits are not exceeded). Typical slew rate 3.5 V/µs; can be shorted to either supply.
7 VCC+ power_in Positive supply rail. Absolute-maximum +18 V (with respect to the supply midpoint); recommended ±3.5 V to ±18 V dual-supply, or +7 V to +36 V single-supply with VCC- tied to GND.
8 NC unconnected No internal connection. Do not connect.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package PDIP-8
Category Amplifiers/Comparators
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • TL061ACP
  • TL061ACPBCP
  • TL061ACPIP
  • TL061ACPCD
  • TL061ACPACD
  • TL061ACPBCD
  • TL061ACPID
  • TL061ACPS
  • TL061ACPBCPS
  • TL061ACPIPS

CAD (KiCad official)

  • Symbol: TL061ACP
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: PDIP-8 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (None pp, sha256 8b4d9405b319a9d3, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF