Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MC33078DR

Texas Instruments · Operational Amplifier · SOIC-8

MC33078DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Output of amplifier 1.
2 IN1- input Inverting input of amplifier 1.
3 IN1+ input Non-inverting input of amplifier 1.
4 VCC- power_in Negative supply voltage, VCC- range -5 V to -18 V (recommended operating conditions).
5 IN2+ input Non-inverting input of amplifier 2.
6 IN2- input Inverting input of amplifier 2.
7 OUT2 output Output of amplifier 2.
8 VCC+ power_in Positive supply voltage, VCC+ range 5 V to 18 V (recommended operating conditions).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, VCC+ VCC+ 18 V 2
Supply voltage, VCC- VCC– -18 V 2
Supply voltage, VCC+ – VCC- VCC+ – VCC– 36 V 2
Input current II -10 10 mA 2
Operating virtual junction temperature TJ 150 °C 2
Storage temperature range Tstg -65 150 °C 2
Supply voltage, VCC- VCC– -5 -18 V 2
Supply voltage, VCC+ VCC+ 5 18 V 2
Operating free-air temperature range TA -40 85 °C 2
Input offset voltage VIO 0.15 2 mV TA = 25°C; VO = 0, RS = 10 Ω, VCM = 0 3
Input offset voltage VIO 3 mV TA = –40°C to 85°C; VO = 0, RS = 10 Ω, VCM = 0 3
Input bias current IIB 300 750 nA TA = 25°C; VO = 0, VCM = 0 3
Input bias current IIB 800 nA TA = –40°C to 85°C; VO = 0, VCM = 0 3
Input offset current IIO 25 150 nA TA = 25°C; VO = 0, VCM = 0 3
Input offset current IIO 175 nA TA = –40°C to 85°C; VO = 0, VCM = 0 3
Common-mode input voltage range VICR 13 14 V ΔVIO = 5 mV, VO = 0 3
Large-signal differential voltage amplification AVD 90 110 dB TA = 25°C; RL ≥ 2 kΩ, VO = ±10 V 3
Large-signal differential voltage amplification AVD 85 dB TA = –40°C to 85°C; RL ≥ 2 kΩ, VO = ±10 V 3
Maximum output voltage swing, positive VOM+ 13.2 13.8 V VID = ±1 V; RL = 2 kΩ 3
Maximum output voltage swing, negative VOM– -13.2 -13.7 V VID = ±1 V; RL = 2 kΩ 3
Maximum output voltage swing, positive VOM+ 13.5 14.1 V VID = ±1 V; RL = 10 kΩ 3
Maximum output voltage swing, negative VOM– -14 -14.6 V VID = ±1 V; RL = 10 kΩ 3
Common-mode rejection ratio CMMR 80 100 dB VIN = ±13 V 3
Supply-voltage rejection ratio kSVR 80 105 dB VCC+ = 5 V to 15 V, VCC– = –5 V to –15 V 3
Source output short-circuit current IOS 15 29 mA /VID/ = 1 V, output to GND 3
Sink output short-circuit current IOS -20 -37 mA /VID/ = 1 V, output to GND 3
Supply current (per channel) ICC 2.05 2.5 mA TA = 25°C; VO = 0 3
Supply current (per channel) ICC 2.75 mA TA = –40°C to 85°C; VO = 0 3
Slew rate at unity gain SR 5 7 V/µs AVD = 1, VIN = –10 V to 10 V, RL = 2 kΩ, CL = 100 pF 3
Gain bandwidth product GBW 10 16 MHz f = 100 kHz 3

CAD (KiCad official)

  • Symbol: MC33078DR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mc33078dr-etched.step / mc33078dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mc33078dr.step / mc33078dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (27 pp, sha256 49532d4c67f977b8, retrieved 2026-09-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF