3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMP4420HGJ-Z
Monolithic Power Systems · DC-DC Converters · TSOT-23-8
MP4420HGJ-Z from Monolithic Power Systems, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PG | output | Open-drain power-good output that goes high when the output voltage exceeds 90% of nominal, pulled up through a resistor (e.g. 100kΩ). |
| 2 | IN | power_in | Supply voltage input that operates from a 4V to 36V rail and requires input capacitor C1 for decoupling, connected with a wide PCB trace. |
| 3 | SW | output | Switch output node connected using a wide PCB trace. |
| 4 | GND | power_in | System ground and reference ground of the regulated output voltage, connected with copper traces and vias. |
| 5 | BST | passive | Bootstrap pin requiring a capacitor to SW to form a floating supply for the high-side switch driver, with a 20Ω resistor in series strongly recommended to reduce SW spike voltage. |
| 6 | EN/SYNC | input | Enable input (high enables the part) that also accepts an external clock of 200kHz to 2.2MHz to set the switching frequency. |
| 7 | VCC | power_out | Internal 5V bias supply output to be decoupled with a 0.1μF to 0.22μF capacitor not exceeding 0.22μF. |
| 8 | FB | input | Feedback input connected to the tap of an external resistor divider from the output to GND to set the output voltage, with frequency fold-back when FB is below 660mV. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | TSOT-23-8 |
| Category | Power Management |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN | -0.3 | 40 | V | 3 | ||
| Switch voltage | VSW | -0.3 | 41 | V | 3 | ||
| All other pins | -0.3 | 6 | V | 3 | |||
| Continuous power dissipation | 1.25 | W | TA = +25°C, TSOT23-8 | 3 | |||
| Junction temperature | TJ | 150 | °C | 3 | |||
| Lead temperature | 260 | °C | 3 | ||||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Continuous supply voltage | VIN | 4 | 36 | V | 3 | ||
| Output voltage | VOUT | 0.8 | V | 0.8V to 0.9xVIN | 3 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 3 | ||
| Quiescent supply current | IQ | 0.5 | 0.7 | mA | VEN = 2V, VFB = 1V | 4 | |
| HS switch on-resistance | RON_HS | 90 | 105 | mΩ | VBST-SW=5V | 4 | |
| LS switch on-resistance | RON_LS | 55 | 75 | mΩ | VCC =5V | 4 | |
| Current limit | ILIMIT | 3.2 | 4.2 | 5.3 | A | Under 40% Duty Cycle | 4 |
| Oscillator frequency | fSW | 320 | 410 | 500 | kHz | VFB=750mV | 4 |
| Fold-back frequency | fFB | 70 | 100 | 130 | kHz | VFB<400mV | 4 |
| Maximum duty cycle | DMAX | 92 | 95 | % | VFB=750mV, 410kHz | 4 | |
| Sync frequency range | fSYNC | 0.2 | 2.4 | MHz | 4 | ||
| Feedback voltage | VFB | 780 | 792 | 804 | mV | 4 | |
| Feedback current | IFB | 10 | 100 | nA | VFB=820mV | 4 | |
| EN rising threshold | VEN RISING | 1.15 | 1.4 | 1.65 | V | 4 | |
| EN falling threshold | VEN FALLING | 1.05 | 1.25 | 1.45 | V | 4 | |
| EN input current | IEN | 4 | 6 | μA | VEN=2V | 4 | |
| EN input current | IEN | 0 | 0.2 | μA | VEN=0 | 4 | |
| VIN UVLO threshold rising | INUVRISING | 3.3 | 3.5 | 3.7 | V | 4 | |
| VIN UVLO threshold falling | INUVFALLING | 3.1 | 3.3 | 3.5 | V | 4 | |
| VCC regulator | VCC | 4.6 | 4.9 | 5.2 | V | ICC=0mA | 4 |
| VCC load regulation | 1.5 | 4 | % | ICC=5mA | 4 | ||
| Soft-start period | tSS | 0.55 | 1.45 | 2.45 | ms | VOUT from 10% to 90% | 4 |
| Thermal shutdown | 150 | 170 | °C | 4 | |||
| PG rising threshold | PGVth RISING | 86.5 | 90 | 93.5 | % | as percentage of VFB | 4 |
| PG falling threshold | PGVth FALLING | 80.5 | 84 | 87.5 | % | as percentage of VFB | 4 |
| PG rising delay | PGTd_RISING | 40 | 90 | 160 | μs | 5 | |
| PG falling delay | PGTd_FALLING | 30 | 55 | 95 | μs | 5 | |
| PG sink voltage | VPG | 0.1 | 0.3 | V | Sink 4mA | 5 | |
| PG leakage current | ILKG_PG | 10 | 100 | nA | 5 | ||
| Shutdown supply current | ISHDN | 8 | μA | VEN = 0V | 4 | ||
| Switch leakage | ILKG SW | 1 | μA | VEN = 0V, VSW =12V | 4 | ||
| Minimum on time | tON MIN | 70 | ns | 4 | |||
| EN threshold hysteresis | VEN_HYS | 150 | mV | 4 | |||
| VIN UVLO hysteresis | INUVHYS | 200 | mV | 4 | |||
| Thermal hysteresis | 30 | °C | 4 | ||||
| PG threshold hysteresis | PGVth_HYS | 6 | % | as percentage of VFB | 5 | ||
| Thermal resistance junction-ambient | θJA | 100 | °C/W | TSOT23-8, JESD51-7 4-layer PCB | 3 | ||
| Thermal resistance junction-case | θJC | 55 | °C/W | TSOT23-8, JESD51-7 4-layer PCB | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | 4 GND System Ground. This pin is the reference ground of the regulated output voltage, and PCB layout requires special care. For best results, connect to GND with copper traces and vias. | 12 |
CAD (KiCad official)
- Symbol:
MP4420HGJ-Z - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
mp4420hgj-z-etched.step/mp4420hgj-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp4420hgj-z.step/mp4420hgj-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (20 pp, sha256
c68628245baef462, retrieved 2026-10-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).