Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM293MDREP

Texas Instruments · Comparators · SOIC-8

LM293MDREP from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1OUT output Output of comparator 1 with open-collector design compatible with TTL, MOS, and CMOS; maximum 20 mA output current and 36 V output voltage.
2 1IN- input Inverting input of comparator 1; input voltage range -0.3 to 36 V, common-mode voltage 0 to VCC-1.5 V, input bias current -25 to -400 nA.
3 1IN+ input Non-inverting input of comparator 1; input voltage range -0.3 to 36 V, common-mode voltage 0 to VCC-1.5 V, input bias current -25 to -400 nA.
4 GND power_in Ground reference.
5 2IN+ input Non-inverting input of comparator 2; input voltage range -0.3 to 36 V, common-mode voltage 0 to VCC-1.5 V, input bias current -25 to -400 nA.
6 2IN- input Inverting input of comparator 2; input voltage range -0.3 to 36 V, common-mode voltage 0 to VCC-1.5 V, input bias current -25 to -400 nA.
7 2OUT output Output of comparator 2 with open-collector design compatible with TTL, MOS, and CMOS; maximum 20 mA output current and 36 V output voltage.
8 VCC power_in Positive supply voltage; rated 2 V to 36 V maximum (tested to 30 V) with typical supply current 0.4 mA per comparator.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 36 V 2
Differential input voltage VID -36 36 V Differential voltage at IN+ with respect to IN– 2
Input voltage range (either input) VI -0.3 36 V 2
Output voltage VO 36 V 2
Output current IO 20 mA 2
Package thermal impedance, D package θJA 97 °C/W D package 2
Operating virtual junction temperature TJ 150 °C 2
Storage temperature range Tstg -65 150 °C 2
Supply voltage range (max rating; tested to 30 V) VCC 2 36 V Single or dual supplies; max rating, tested to 30 V 1
Operating free-air temperature range TA -55 125 °C LM293MDREP ordering information 1
Input offset voltage, 25 °C VIO 2 5 mV VCC = 5 V to 30 V, VO = 1.4 V 3
Input offset voltage, full range VIO 9 mV Full range (–55 °C to 125 °C); VCC = 5 V to 30 V, VO = 1.4 V 3
Input offset current, 25 °C IIO 5 50 nA VO = 1.4 V 3
Input offset current, full range IIO 250 nA Full range (–55 °C to 125 °C); VO = 1.4 V 3
Input bias current, 25 °C IIB -25 -250 nA VO = 1.4 V 3
Input bias current, full range IIB -400 nA Full range (–55 °C to 125 °C); VO = 1.4 V 3
Common-mode input voltage range, 25 °C (max VCC – 1.5 V) VICR 0 V 25 °C; upper limit printed as VCC – 1.5 V 3
Common-mode input voltage range, full range (max VCC – 2 V) VICR 0 V Full range (–55 °C to 125 °C); upper limit printed as VCC – 2 V 3
Large-signal differential voltage amplification AVD 50 200 V/mV VCC = 15 V, VO = 1.4 V to 11.4 V, RL ≥ 15 kΩ to VCC, 25 °C 3
High-level output current, 25 °C IOH 0.1 50 nA VOH = 5 V, VID = 1 V, 25 °C 3
High-level output current, full range IOH 1 µA Full range (–55 °C to 125 °C); VOH = 30 V, VID = 1 V 3
Low-level output voltage, 25 °C VOL 150 400 mV IOL = 4 mA, VID = –1 V, 25 °C 3
Low-level output voltage, full range VOL 700 mV Full range (–55 °C to 125 °C); IOL = 4 mA, VID = –1 V 3
Low-level output current IOL 6 mA VOL = 1.5 V, VID = –1 V, 25 °C 3
Supply current, VCC = 5 V ICC 0.8 1 mA VCC = 5 V, RL = ∞, 25 °C 3
Supply current, VCC = 30 V ICC 2.5 mA VCC = 30 V, RL = ∞, full range (–55 °C to 125 °C) 3
Response time, 100 mV input step with 5 mV overdrive 1.3 µs VCC = 5 V, TA = 25 °C; RL connected to 5 V through 5.2 kΩ, CL = 15 pF 3
Response time, TTL-level input step 0.3 µs VCC = 5 V, TA = 25 °C; RL connected to 5 V through 5.2 kΩ, CL = 15 pF 3

CAD (KiCad official)

  • Symbol: LM293MDREP
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lm293mdrep-etched.step / lm293mdrep-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm293mdrep.step / lm293mdrep.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (11 pp, sha256 514c497748a8b1b8, retrieved 2026-10-01, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF