3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownKP421LGA
KIWI · Monitors & Reset Circuits · SOT-23-6
KP421LGA from KIWI, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Chip supply pin; the datasheet gives a 650 V VDD breakdown voltage, a 13.5-17 V start-up voltage, and an 8.5-10.5 V undervoltage-protection threshold. |
| 2 | GND | power_in | Chip reference ground pin. |
| 3 | COMP | input | Ripple-removal loop compensation pin; when left floating, the compensation parameters are fixed internally (3 uF capacitance), and with an external capacitor the COMP clamp voltage is 1.8-2.2 V. |
| 4 | DET | input | MOSFET drain voltage detection pin with a 2 V clamp voltage, whose LED short-circuit protection thresholds are 36-44 uA (trigger) and 70-100 uA (recovery). |
| 5 | CS | input | LED current sense input with a 190-200 mV current limit (VCS_MAX) and a 5-15 mV open-circuit detection threshold. |
| 6 | GATE | output | NMOSFET gate drive output whose maximum gate voltage is 8-12 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | KIWI |
| Package | SOT-23-6 |
| Category | Power Management ICs |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD breakdown voltage | 650 | V | 3 | ||||
| CS, DET pin voltage | -0.3 | 8 | V | 3 | |||
| Maximum power dissipation (SOT23-6) | PDmax | 0.45 | W | TA=50°C, note 2 | 3 | ||
| Chip operating junction temperature | 150 | °C | 3 | ||||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Pin temperature (soldering) | 260 | °C | Soldering 10 s | 3 | |||
| ESD capability | 3000 | V | Human body model | 3 | |||
| Operating junction temperature | -40 | 125 | °C | 3 | |||
| VDD input start-up voltage | VDDON | 13.5 | 16 | 17 | V | 3 | |
| VDD undervoltage protection threshold | VDDOFF | 8.5 | 9.5 | 10.5 | V | 3 | |
| VDD start-up current | IVDDST | 100 | 200 | 300 | uA | VDD<VDD_ON | 3 |
| VDD operating current | IVDDOp | 100 | 200 | 300 | uA | 3 | |
| Current limit | VCS_MAX | 190 | 195 | 200 | mV | 3 | |
| Open-circuit detection threshold | VCS_MIN_L | 5 | 10 | 15 | mV | 3 | |
| Open-circuit detection threshold hysteresis | VCS_MIN_H | 25 | 30 | 35 | mV | 3 | |
| GATE maximum voltage | VGATE_MAX | 8 | 10 | 12 | V | 4 | |
| LED short-circuit recovery threshold | IDETH | 70 | 80 | 100 | uA | 4 | |
| LED short-circuit protection threshold | IDETL | 36 | 40 | 44 | uA | 4 | |
| COMP clamp voltage | COMPmax | 1.8 | 2 | 2.2 | V | COMP pin with capacitor | 4 |
| DET pin clamp voltage | VDETClamp | 2 | V | 4 | |||
| Short-circuit protection delay | TDET1 | 0.4 | ms | 4 | |||
| Short-circuit protection restart time | TDET2 | 500 | ms | 4 | |||
| Thermal resistance junction-to-ambient (SOT23-6) | θJA | 220 | oC/W | SOT23-6, note 2 | 3 | ||
| Over-temperature protection trigger point | TOTP | 135 | °C | 4 |
CAD (KiCad official)
- Symbol:
KP421LGA - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.05 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
kp421lga-etched.step/kp421lga-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);kp421lga.step/kp421lga.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: KIWI datasheet (7 pp, sha256
347cd2cd26fc92f5, retrieved 2026-11-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).