Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN65LVDS9637DGK

Texas Instruments · Pre-ordered Chips · VSSOP-8

SN65LVDS9637DGK from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VCC power_in Supply voltage; recommended range is 3 V to 3.6 V (3.3 V nominal), with an absolute maximum of -0.5 V to 4 V.
2 1Y output LVTTL output signal for channel 1; absolute maximum output range is -0.5 V to VCC + 0.5 V.
3 2Y output LVTTL output signal for channel 2; absolute maximum output range is -0.5 V to VCC + 0.5 V.
4 GND power_in Ground; the network ground terminal to which all voltages except differential bus voltages are referenced.
5 2B input Differential (LVDS) inverting input for channel 2; recommended
6 2A input Differential (LVDS) non-inverting input for channel 2; recommended
7 1B input Differential (LVDS) inverting input for channel 1; recommended
8 1A input Differential (LVDS) non-inverting input for channel 1; recommended

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Interface ICs
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Positive-going differential input voltage threshold VIT+ 100 mV See Figure 7 and Table 1 9
Negative-going differential input voltage threshold VIT- -100 mV See Figure 7 and Table 1 9
High-level output voltage VOH 2.4 V IOH = -8 mA 9
High-level output voltage VOH 2.8 V IOH = -4 mA 9
Low-level output voltage VOL 0.4 V IOL = 8 mA 9
Supply current ICC 5.5 10 mA No load 9
Input current (A or B inputs) II -20 -10 -2 μA VI = 0 9
Input current (A or B inputs) II -3 -1.2 μA VI = 2.4 V 9
Power-off input current (A or B input) II(OFF) 6 20 μA VCC = 0, VI = 3.6 V 9
High-impedance output current IOZ -10 10 μA VO = 0 or VCC 9
Supply voltage VCC 3 3.3 3.6 V 7
Magnitude of differential input voltage /VID/ 0.1 0.6 V 7
Operating free-air temperature TA -40 85 °C SN65 prefix 7
Supply voltage range VCC -0.5 4 V 7
Input voltage range, A or B VI -0.5 4 V A or B 7
Input voltage range, enables and output VI -0.5 V Enables and output; upper limit printed as VCC + 0.5 V 7
Storage temperature Tstg -65 150 °C 7
Propagation delay time, low-to-high-level output tPLH 1.5 2.1 3 ns CL = 10 pF, See Figure 8 10
Propagation delay time, high-to-low-level output tPHL 1.5 2.1 3 ns CL = 10 pF, See Figure 8 10
Pulse skew (/tPHL, tPLH/) tsk(p) 0 0.4 ns CL = 10 pF, See Figure 8 10
Channel-to-channel output skew tsk(o) 0.1 0.3 ns CL = 10 pF, See Figure 8 10
Part-to-part skew tsk(pp) 1 ns 10
Propagation delay time, high-level-to-high-impedance output tPHZ 6.5 12 ns See Figure 9 10
Propagation delay time, low-level-to-high-impedance output tPLZ 5.5 12 ns See Figure 9 10
Propagation delay time, high-impedance-to-high-level output tPZH 8 12 ns See Figure 9 10
Propagation delay time, high-impedance-to-low-level output tPZL 3 12 ns See Figure 9 10
Power rating (DGK package) 425 mW TA ≤ 25°C 8
Power rating (DGK package) 272 mW TA ≤ 70°C 8
Power rating (DGK package) 221 mW TA ≤ 85°C 8
Output signal rise time, 20% to 80% tr 0.6 ns CL = 10 pF, See Figure 8 10
Output signal fall time, 80% to 20% tf 0.7 ns CL = 10 pF, See Figure 8 10
Derating factor above TA = 25°C (DGK package) 3.4 mW/°C Above TA = 25°C 8

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: SN65LVDS9637DGK
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: sn65lvds9637dgk-etched.step / sn65lvds9637dgk-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn65lvds9637dgk.step / sn65lvds9637dgk.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (55 pp, sha256 890e33b3bb5c4e86, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF