component
S1206-FA-30.0A
Public Made by Adomby adom
SART Nanjing Sart Tech Disposable Fuses, 1206. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownS1206-FA-30.0A
SART Nanjing Sart Tech · Disposable Fuses · 1206
S1206-FA-30.0A from SART Nanjing Sart Tech, in a 1206. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | One end termination of the fast-acting fuse (silver over plated with tin); the element is non-polar, rated 30A, 48V, with 1.0 mΩ typical cold DCR. |
| 2 | 2 | passive | Opposite end termination of the fast-acting fuse (silver over plated with tin); the element is non-polar, rated 30A, 48V, interrupting 300A at 32V DC and 200A at 48V DC. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SART Nanjing Sart Tech |
| Package | 1206 |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Rated current (30.0A part) | 30 | A | 1 | ||||
| Voltage rating (30.0A part, as printed in table row) | 48 | V | 1 | ||||
| Interrupting rating | 300 | A | 32V DC | 1 | |||
| Interrupting rating | 200 | A | 48V DC | 1 | |||
| Typical cold DCR | 1 | mΩ | Measured at ≤10% rated current and 25℃ | 1 | |||
| Typical I2T (melting I2T) | 90 | A2s | Melting I2T at 10 times of rated current | 1 | |||
| Opening time at 100% of rating | 4 | hours | 100% of current rating, no fusing | 4 | |||
| Opening time at 350% of rating | 5 | sec | 350% of current rating | 4 | |||
| Temperature rise | ΔT | 95 | ℃ | 100% of current rating, IEC-60127-4 | 4 | ||
| Voltage drop deviation between mean values | 15 | % | 100% of current rating | 4 | |||
| Solderability coverage | 95 | % | 240℃±5℃, 3sec±0.5sec | 4 | |||
| Resistance to soldering /ΔR/ | ΔR | 10 | % | 260℃±5℃, 10sec±0.5sec | 4 | ||
| Bending test /ΔR/ | ΔR | 10 | % | Distance between holding points 90mm, bending 1mm, time 10s | 4 | ||
| High temperature operating life /ΔR/ | ΔR | 10 | % | T=70℃±2℃, 60%In, 96hours; no fusing | 4 | ||
| Humidity (steady state) /ΔR/ | ΔR | 10 | % | T=40℃±2℃, 90%～95%RH, 1000hours | 4 | ||
| Low temperature storage /ΔR/ | ΔR | 10 | % | T=-55℃±3℃, 96hours | 4 | ||
| High temperature storage /ΔR/ | ΔR | 10 | % | T=125℃±2℃, 96hours | 4 | ||
| Salt spray /ΔR/ | ΔR | 10 | % | 5% salt solution, 48hours | 4 | ||
| Thermal shock /ΔR/ | ΔR | 10 | % | 100 cycles between -65℃/+125℃, 60 minutes each extreme | 4 | ||
| Operating temperature | -55 | 125 | ℃ | 1 | |||
| Storage ambient temperature (recommended) | 5 | 30 | ℃ | Storage | 6 | ||
| Storage relative humidity (recommended) | 25 | 60 | %RH | Storage | 6 | ||
| Infrared reflow peak temperature | 260 | ℃ | Infrared reflow, time 5sec max | 5 | |||
| Wave soldering reservoir temperature | 260 | ℃ | Wave soldering, time in reservoir 10sec max | 5 | |||
| Hand soldering temperature | 350 | ℃ | Hand soldering, time 5sec max | 5 |
CAD (KiCad official)
- Symbol:
S1206-FA-30.0A - Footprint:
Fuse:Fuse_1206_3216Metric - 3D model: 1206 (KiCad packages3D, STEP)
- 3D model files:
s1206-fa-30-0a-etched.step/s1206-fa-30-0a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);s1206-fa-30-0a.step/s1206-fa-30-0a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SART Nanjing Sart Tech datasheet (6 pp, sha256
06b1e373164f757d, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).