component

TLV7011DCKR

Public Unreviewed

by Ray

Texas Instruments Comparators, SC-70-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentop-amp-cmptlv7011dckr
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

Datasheet

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

TLV7011DCKR

Texas Instruments · Comparators · SC-70-5

TLV7011DCKR from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Push-pull comparator output. Drives high (near VDD) when IN+ > IN-, low (near GND) otherwise. Rail-to-rail output stage.
2 GND power_in Ground / negative supply reference. Connect to system ground.
3 IN+ input Non-inverting analog comparator input. Rail-to-rail input range (GND - 0.2 V to VDD + 0.2 V).
4 IN- input Inverting analog comparator input. Rail-to-rail input range (GND - 0.2 V to VDD + 0.2 V).
5 VDD power_in Positive supply input, 1.6 V to 5.5 V. Bypass to GND with a 0.1 µF ceramic capacitor placed close to the pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-5
Category Op-amp/Cmp
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • TLV7011DCKR
  • TLV7011DCKRDCKT
  • TLV7011DCKRDPWR

CAD (KiCad official)

  • Symbol: TLV7011DCKR
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SC-70-5 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
tlv7011dckr.step 87 KB You want the bare part, or you mark your own boards.
tlv7011dckr-etched.step 1.6 MB You want the part with TLV7011DCKR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 413 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (53 pp, sha256 e18148a3e2a96540, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF