component
TMP411DQDGKRQ1
Public Made by Adomby adom
Texas Instruments Temperature Sensors, VSSOP-8-0.65mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTMP411DQDGKRQ1
Texas Instruments · Temperature Sensors · VSSOP-8-0.65mm
TMP411DQDGKRQ1 from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V+ | power_in | Positive supply pin; for the TMP411D-Q1 the supply range is 1.62 V to 5.5 V. |
| 2 | D+ | input | Analog input connected to the positive terminal of the remote temperature sensor (diode-connected or transistor base-emitter); tie D+ to D− if the remote channel is unused. |
| 3 | D− | input | Analog input connected to the negative terminal of the remote temperature sensor; must be tied to D+ when the remote channel is not used to avoid false fault warnings. |
| 4 | THERM | output | Active-low open-drain thermal flag output that requires a pull-up resistor to V+; it cannot be disabled in software. |
| 5 | GND | power_in | Ground reference pin for the device. |
| 6 | ALERT/THERM2 | output | Active-low open-drain output that is ALERT by default (maskable in software) or can be configured as a second THERM flag (THERM2); it requires a pull-up resistor to V+. |
| 7 | SDA | bidirectional | SMBus/two-wire serial data line, open-drain, requires a pull-up resistor to V+. |
| 8 | SCL | input | SMBus/two-wire serial clock line, open-drain, requires a pull-up resistor to V+. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8-0.65mm |
| Category | Sensors |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TMP411DQDGKRQ1 - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
- 3D model files:
tmp411dqdgkrq1-etched.step/tmp411dqdgkrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmp411dqdgkrq1.step/tmp411dqdgkrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (59 pp, sha256
7d27d12a62253e80, retrieved 2026-10-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).