Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MP174GS-Z

Monolithic Power Systems · AC-DC Controllers And Regulators · SOIC-8

MP174GS-Z from Monolithic Power Systems, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Control circuit power supply; operating VCC range 5.3V to 5.6V, absolute maximum 6.5V.
2 FB input Regulator feedback; regulates to a 2.55V reference, with OLP trigger at 1.7V and open-loop detection at 0.5V.
3 SOURCE power_in Internal power MOSFET source and ground reference for the VCC and FB pins.
4 SOURCE power_in Internal power MOSFET source and ground reference for the VCC and FB pins.
5 N/C unconnected Not connected.
6 N/C unconnected Not connected.
7 DRAIN passive Internal power MOSFET drain and high-voltage current source input, rated -0.3V to 700V.
8 N/C unconnected Not connected.

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package SOIC-8
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Drain to source voltage -0.3 700 V 3
All other pins voltage -0.3 6.5 V 3
Continuous power dissipation SOIC8 1 W TA = +25°C 3
Junction temperature TJ 150 °C 3
Lead temperature 260 °C 3
Storage temperature -60 150 °C 3
ESD Human Body Model 2 kV 3
ESD Charged Device Model SOIC8 2 kV SOIC8 3
Operating junction temperature TJ -40 125 °C 3
Operating VCC range VCC 5.3 5.6 V 3
Thermal resistance junction-ambient SOIC-8 θJA 96 °C/W JESD51-7, 4-layer PCB 3
Thermal resistance junction-case SOIC-8 θJC 45 °C/W JESD51-7, 4-layer PCB 3
Internal regulator supply current Iregulator 2.2 4.1 6 mA VCC=4V;VDrain=100V 4
Drain pin leakage current ILeak 10 17 μA VCC=5.8V;VDrain=400V 4
Breakdown voltage V(BR)DSS 700 V TJ=25°C 4
ON resistance Ron 13.5 17 Ω TJ=25°C 4
ON resistance Ron 21 25 Ω TJ=125°C 4
VCC level where internal regulator stops VCCOFF 5.4 5.6 6 V VCC increasing 4
VCC level where internal regulator turns on VCCON 5.1 5.3 5.7 V VCC decreasing 4
VCC regulator on and off hysteresis 130 250 mV 4
VCC level where IC stops VCCstop 3 3.4 3.6 V VCC decreasing 4
VCC level where protection phase ends VCCpro 2.4 2.8 V VCC decreasing 4
Internal IC consumption ICC 720 μA fs=28kHz, D=67.8% 4
Internal IC consumption (No switching) ICC 200 uA 4
Internal IC consumption, latch-off phase ICCLATCH 16 24 μA VCC=5.3V 4
Peak current limit ILimit 600 660 720 mA TJ=25°C 4
Leading-edge blanking τLEB1 350 ns 4
SCP threshold ISCP 750 900 mA TJ=25°C 4
Leading-edge blanking for SCP τLEB2 180 ns 4
Minimum off time τminoff 9.5 12 15 μs 4
Maximum on time τmanon 19 24 31 μs 4
Primary MOSFET feedback turn-on threshold VFB 2.45 2.55 2.65 V 4
OLP feedback trigger threshold VFB_OLP 1.6 1.7 1.8 V 4
OLP delay time τOLP 220 ms fs=28kHz 4
Open-loop detection VOLD 0.4 0.5 0.6 V 4
Thermal shutdown threshold 150 °C guaranteed by design 4
Thermal shutdown recovery hysteresis 30 °C guaranteed by design 4

CAD (KiCad official)

  • Symbol: MP174GS-Z
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mp174gs-z-etched.step / mp174gs-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mp174gs-z.step / mp174gs-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (22 pp, sha256 4e3c6ed15e97c190, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF