3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTMCS1100A1QDRQ1
Texas Instruments · Current Sensors · SOIC-8
TMCS1100A1QDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN+ | input | Input current positive pin; current flowing into this pin is treated as positive polarity. |
| 2 | IN+ | input | Input current positive pin; current flowing into this pin is treated as positive polarity. |
| 3 | IN- | input | Input current negative pin, which carries the return path of the sensed current. |
| 4 | IN- | input | Input current negative pin, which carries the return path of the sensed current. |
| 5 | GND | power_in | Analog ground; input voltages VIN+ and VIN- are specified relative to this pin. |
| 6 | VREF | power_in | Zero current output voltage reference that sets the zero-current output level and allows bidirectional or unidirectional sensing; VREF must be within GND - 0.3 V to VS + 0.3 V. |
| 7 | VOUT | output | Output voltage that is proportional to the input current; VOUT must be within GND - 0.3 V to VS + 0.3 V. |
| 8 | VS | power_in | Analog power supply; operating supply voltage is 3 V to 5.5 V for TMCS1100A1-Q1 to A3-Q1 and 4.5 V to 5.5 V for TMCS1100A4-Q1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Magnetic Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Sensitivity error, incl. lifetime and environmental drift | -1.02 | -0.47 | 1.02 | % | 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= 25ºC | 7 | |
| Sensitivity error | -0.7 | 0.2 | 0.7 | % | 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= 25ºC | 7 | |
| Sensitivity error | -0.85 | 0.4 | 0.85 | % | 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= -40ºC to +85ºC | 7 | |
| Sensitivity error | -1.15 | 0.5 | 1.15 | % | 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= -40ºC to +125ºC | 7 | |
| Output voltage offset error (TMCS1100A1-Q1) | VOE | -3 | 0.4 | 3 | mV | 7 | |
| Output voltage offset drift (TMCS1100A1-Q1) | -12 | 3.7 | 12 | µV/℃ | TA= -40ºC to +125ºC | 7 | |
| Offset error, RTI (TMCS1100A1-Q1) | IOS | -60 | 8 | 60 | mA | 7 | |
| Offset error temperature drift, RTI (TMCS1100A1-Q1) | -240 | 74 | 240 | µA/°C | TA= -40ºC to +125ºC | 7 | |
| Power-supply rejection ratio (TMCS1100A1-Q1-A3-Q1) | PSRR | -2 | 1 | 2 | mV/V | VS = 3 V to 5.5 V, VREF = VS/2, TA= -40ºC to +125ºC | 7 |
| Reference voltage rejection ratio, output referred (TMCS1100A1-Q1-A3-Q1) | RVRR | 1 | 3.5 | mV/V | VREF = 0.5 V to 4.5 V | 7 | |
| Nonlinearity error | -0.05 | 0.05 | % | VOUT = 0.5 V to VS, 0.5 V | 7 | ||
| VREF input current | -5 | 1 | 5 | µA | VREF = GND, VS | 8 | |
| VREF external source impedance | 5 | kΩ | Maximum source impedance of external circuit driving VREF | 8 | |||
| Operating supply voltage, TMCS1100A1-Q1-A3-Q1 | VS | 3 | 5 | 5.5 | V | 4 | |
| Input voltage, VIN+ and VIN- (relative to GND) | VIN+,VIN- | -600 | 600 | VPK | 4 | ||
| Operating free-air temperature | TA | -40 | 125 | °C | 4 | ||
| Supply voltage | VS | -0.3 | 6 | V | 4 | ||
| Junction temperature | TJ | -65 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Quiescent current | IQ | 4.5 | 5.5 | mA | TA = 25ºC | 9 | |
| Quiescent current | IQ | 6 | mA | TA = -40ºC to +125ºC | 9 | ||
| Maximum power dissipation (both sides) | PD | 673 | mW | 5 | |||
| Maximum power dissipation (current input, side-1) | PD1 | 640 | mW | IIN = 16 A | 5 | ||
| Maximum power dissipation (side-2) | PD2 | 33 | mW | VS = 5.5 V, IQ = 6mA, no VOUT load | 5 | ||
| Sensitivity (TMCS1100A1-Q1) | 50 | mV/A | 7 | ||||
| Input conductor resistance IN+ to IN- | RIN | 1.8 | mΩ | IN+ to IN- | 7 | ||
| Input conductor resistance temperature drift | 4.4 | μΩ/°C | TA= -40ºC to +125ºC | 8 | |||
| Noise density, RTI (TMCS1100A1-Q1) | 380 | μA/√Hz | 7 | ||||
| Magnetic coupling factor | G | 1.1 | mT/A | TA= 25ºC | 8 | ||
| Common mode rejection ratio, RTI | CMRR | 5 | uA/V | DC to 60Hz | 7 | ||
| Common mode transient immunity | CMTI | 50 | kV/µs | 7 | |||
| Allowable continuous RMS current | IIN,max | 30 | A | TA= 25ºC | 8 | ||
| Allowable continuous RMS current | IIN,max | 25 | A | TA= 85ºC | 8 | ||
| Allowable continuous RMS current | IIN,max | 22.5 | A | TA= 105ºC | 8 | ||
| Allowable continuous RMS current | IIN,max | 16 | A | TA= 125ºC | 8 | ||
| Swing to GND, current driven | 5 | 10 | mV | RL = 10 kΩ to GND, TA= -40ºC to +125ºC | 8 | ||
| Swing to GND, zero current (TMCS1100A1-Q1-A3-Q1) | 5 | 20 | mV | RL = 10 kΩ to GND, TA= -40ºC to +125ºC, VREF = GND, IIN = 0 A | 8 | ||
| Short circuit output current | 90 | mA | VOUT short to ground, short to VS | 8 | |||
| Maximum capacitive load | 1 | nF | No sustained oscillation | 8 | |||
| Closed loop output impedance | ZOUT | 0.2 | Ω | f = 1 Hz to 1 kHz | 8 | ||
| Closed loop output impedance | ZOUT | 2 | Ω | f = 10 kHz | 8 | ||
| Bandwidth | BW | 80 | kHz | -3-dB Bandwidth | 8 | ||
| Slew rate | SR | 1.5 | V/µs | Slew rate of output amplifier during single transient step | 8 | ||
| Response time | tr | 6.5 | µs | for a 1V output transition | 8 | ||
| Propagation delay | tp | 4 | µs | for a 1V output transition | 8 | ||
| Current overload response time | tr,SC | 5 | µs | Input current step amplitude is twice full scale output range | 8 | ||
| Current overload propagation delay | tp,SC | 3 | µs | Input current step amplitude is twice full scale output range | 8 | ||
| Current overload recovery time | 15 | µs | Time from end of current causing output saturation condition to valid output | 8 | |||
| Power on time | 25 | ms | Time from VS > 3 V to valid output | 9 | |||
| Junction-to-ambient thermal resistance | RθJA | 36.6 | °C/W | Applies when device mounted on TMCS1100EVM | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 50.7 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 9.6 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ΨJT | -0.1 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ΨJB | 11.7 | °C/W | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | path directly underneath the package lead footprint, and use a merged copper input trace for both the IN+ and | 38 |
CAD (KiCad official)
- Symbol:
TMCS1100A1QDRQ1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tmcs1100a1qdrq1-etched.step/tmcs1100a1qdrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmcs1100a1qdrq1.step/tmcs1100a1qdrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (49 pp, sha256
e66019599a6cc228, retrieved 2026-10-29, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).