component
TPS7A6133QKVURQ1
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-252-4. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS7A6133QKVURQ1
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-252-4
TPS7A6133QKVURQ1 from Texas Instruments, in a TO-252-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated input voltage pin with a recommended range of 7 V to 40 V (absolute maximum 45 V for transients under 480 ms), bypassed to GND with a capacitor to dampen line transients. |
| 2 | nRST | output | Open-drain reset output that requires an external pullup resistor to VOUT; its absolute maximum rating is 7 V and its low-voltage output range is 0 V to 5.25 V. |
| 3 | GND | power_in | Signal-ground pin of the IC, which is the return for VIN, VOUT and the output capacitor. |
| 4 | ENABLE | input | High-voltage-tolerant enable input with an internal pulldown (enable pin voltage 4 V to 40 V recommended); a high level turns the regulator on, and if left unconnected the device stays disabled. |
| 5 | VOUT | power_out | Regulated 3.3 V output with a limited maximum output current (0 to 300 mA recommended); a low-ESR output capacitor COUT to GND is required for stable operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-252-4 |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
TPS7A6133QKVURQ1 - Footprint:
Package_TO_SOT_SMD:TO-252-4 - 3D model: TO-252-4 (KiCad packages3D, STEP)
- 3D model files:
tps7a6133qkvurq1-etched.step/tps7a6133qkvurq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps7a6133qkvurq1.step/tps7a6133qkvurq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
e95579ec81481585, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).