3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMSP430FR2155TPTR
Texas Instruments · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)
MSP430FR2155TPTR from Texas Instruments, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P1.2/UCB0SIMO/UCB0SDA/TB0TRG/A2/Veref- | bidirectional | General-purpose I/O (reset default OFF) multiplexed with eUSCI_B0 SIMO/SDA, TB0 external trigger, ADC channel A2 and ADC negative reference Veref-. |
| 2 | P1.1/UCB0CLK/ACLK/COMP0.1/A1 | bidirectional | General-purpose I/O (reset default OFF) multiplexed with eUSCI_B0 clock, ACLK output, eCOMP0 input C1 and ADC channel A1. |
| 3 | P1.0/UCB0STE/SMCLK/COMP0.0/A0/Veref+ | bidirectional | General-purpose I/O (reset default OFF) multiplexed with eUSCI_B0 STE, SMCLK output, eCOMP0 input C0, ADC channel A0 and ADC positive reference Veref+. |
| 4 | TEST/SBWTCK | input | Test mode pin used for JTAG/Spy-Bi-Wire clock; it always has an internal pulldown enabled and is left open when unused. |
| 5 | RST/NMI/SBWTDIO | bidirectional | Reset input (reset default OFF) that can also serve as NMI and Spy-Bi-Wire data; unused it is tied to DVCC through 47 kΩ pullup or the internal pullup with a 10 nF (or 1.1 nF) pulldown. |
| 6 | DVCC | power_in | Supply voltage pin, specified from 1.8 V to 3.6 V with a recommended 4.7 µF to 10 µF capacitor at DVCC. |
| 7 | DVSS | power_in | Ground reference pin; all voltages are referenced to VSS. |
| 8 | P2.7/TB0CLK/XIN | bidirectional | General-purpose I/O multiplexed with TB0 clock input and the input terminal for the external crystal oscillator. |
| 9 | P2.6/MCLK/XOUT | bidirectional | General-purpose I/O multiplexed with the MCLK output and the output terminal for the external crystal oscillator. |
| 10 | P2.5/COMP1.0 | bidirectional | General-purpose I/O multiplexed with eCOMP1 input C0. |
| 11 | P2.4/COMP1.1 | bidirectional | General-purpose I/O multiplexed with eCOMP1 input C1. |
| 12 | P4.7/UCB1SOMI/UCB1SCL | bidirectional | General-purpose I/O multiplexed with eUSCI_B1 SOMI or I2C SCL. |
| 13 | P4.6/UCB1SIMO/UCB1SDA | bidirectional | General-purpose I/O multiplexed with eUSCI_B1 SIMO or I2C SDA. |
| 14 | P4.5/UCB1CLK | bidirectional | General-purpose I/O multiplexed with eUSCI_B1 clock. |
| 15 | P4.4/UCB1STE | bidirectional | General-purpose I/O multiplexed with eUSCI_B1 STE. |
| 16 | P6.6/TB3CLK | bidirectional | General-purpose I/O multiplexed with the TB3 timer clock input. |
| 17 | P6.5/TB3.6 | bidirectional | General-purpose I/O multiplexed with Timer_B3 CCR6 capture/compare. |
| 18 | P6.4/TB3.5 | bidirectional | General-purpose I/O multiplexed with Timer_B3 CCR5 capture/compare. |
| 19 | P6.3/TB3.4 | bidirectional | General-purpose I/O multiplexed with Timer_B3 CCR4 capture/compare. |
| 20 | P6.2/TB3.3 | bidirectional | General-purpose I/O multiplexed with Timer_B3 CCR3 capture/compare. |
| 21 | P6.1/TB3.2 | bidirectional | General-purpose I/O multiplexed with Timer_B3 CCR2 capture/compare. |
| 22 | P6.0/TB3.1 | bidirectional | General-purpose I/O multiplexed with Timer_B3 CCR1 capture/compare. |
| 23 | P4.3/UCA1TXD/UCA1SIMO | bidirectional | General-purpose I/O multiplexed with eUSCI_A1 UART TXD or SPI SIMO. |
| 24 | P4.2/UCA1RXD/UCA1SOMI | bidirectional | General-purpose I/O multiplexed with eUSCI_A1 UART RXD or SPI SOMI. |
| 25 | P4.1/UCA1CLK | bidirectional | General-purpose I/O multiplexed with eUSCI_A1 clock. |
| 26 | P4.0/UCA1STE/ISOTXD/ISORXD | bidirectional | General-purpose I/O multiplexed with eUSCI_A1 STE and the ISO transmit/receive functions. |
| 27 | P2.3/TB1TRG | bidirectional | General-purpose I/O multiplexed with the TB1 external trigger input. |
| 28 | P2.2/TB1CLK | bidirectional | General-purpose I/O multiplexed with the TB1 timer clock input. |
| 29 | P2.1/TB1.2/COMP1.O | bidirectional | General-purpose I/O multiplexed with Timer_B1 CCR2 and eCOMP1 output. |
| 30 | P2.0/TB1.1/COMP0.O | bidirectional | General-purpose I/O multiplexed with Timer_B1 CCR1 and eCOMP0 output. |
| 31 | P1.7/UCA0TXD/UCA0SIMO/TB0.2/TDO/A7/VREF+ | bidirectional | General-purpose I/O multiplexed with eUSCI_A0 TXD or SIMO, Timer_B0 CCR2, JTAG TDO, ADC channel A7 and VREF+. |
| 32 | P1.6/UCA0RXD/UCA0SOMI/TB0.1/TDI/TCLK/A6 | bidirectional | General-purpose I/O multiplexed with eUSCI_A0 RXD or SOMI, Timer_B0 CCR1, JTAG TDI/TCLK and ADC channel A6. |
| 33 | P1.5/UCA0CLK/TMS/A5 | bidirectional | General-purpose I/O multiplexed with eUSCI_A0 clock, JTAG TMS and ADC channel A5. |
| 34 | P1.4/UCA0STE/TCK/A4 | bidirectional | General-purpose I/O multiplexed with eUSCI_A0 STE, JTAG TCK and ADC channel A4. |
| 35 | P3.7 | bidirectional | General-purpose I/O with no secondary function on this FR215x device. |
| 36 | P3.6 | bidirectional | General-purpose I/O with no secondary function on this FR215x device. |
| 37 | P3.5 | bidirectional | General-purpose I/O with no secondary function on this FR215x device. |
| 38 | P3.4/SMCLK | bidirectional | General-purpose I/O multiplexed with the SMCLK output. |
| 39 | P5.4 | bidirectional | General-purpose I/O. |
| 40 | P5.3/TB2TRG/A11 | bidirectional | General-purpose I/O multiplexed with the TB2 external trigger input and ADC channel A11. |
| 41 | P5.2/TB2CLK/A10 | bidirectional | General-purpose I/O multiplexed with the TB2 timer clock input and ADC channel A10. |
| 42 | P5.1/TB2.2/MFM.TX/A9 | bidirectional | General-purpose I/O multiplexed with Timer_B2 CCR2, Manchester module transmit and ADC channel A9. |
| 43 | P5.0/TB2.1/MFM.RX/A8 | bidirectional | General-purpose I/O multiplexed with Timer_B2 CCR1, Manchester module receive and ADC channel A8. |
| 44 | P3.3 | bidirectional | General-purpose I/O with no secondary function on this FR215x device. |
| 45 | P3.2 | bidirectional | General-purpose I/O with no secondary function on this FR215x device. |
| 46 | P3.1 | bidirectional | General-purpose I/O with no secondary function on this FR215x device. |
| 47 | P3.0/MCLK | bidirectional | General-purpose I/O multiplexed with the MCLK output. |
| 48 | P1.3/UCB0SOMI/UCB0SCL/A3 | bidirectional | General-purpose I/O multiplexed with eUSCI_B0 SOMI or I2C SCL and ADC channel A3. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage applied at DVCC pin to VSS | -0.3 | 4.1 | V | Grade T | 27 | ||
| Voltage applied to any pin | -0.3 | 4.1 | V | Referenced to VSS; printed as VCC + 0.3 V with 4.1 V maximum | 27 | ||
| Current across the whole chip including IO currents | 50 | mA | Grade T | 27 | |||
| Diode current at any device pin | -2 | 2 | mA | Grade T | 27 | ||
| Maximum junction temperature | TJ | 115 | °C | Grade T | 27 | ||
| Storage temperature | Tstg | -40 | 125 | °C | Grade T | 27 | |
| Supply voltage applied at DVCC pin | VCC | 1.8 | 3.6 | V | Grade T | 27 | |
| Operating free-air temperature | TA | -40 | 105 | °C | Grade T | 27 | |
| Operating junction temperature | TJ | -40 | 115 | °C | Grade T | 27 | |
| Recommended capacitor at DVCC | CDVCC | 4.7 | 10 | µF | Grade T | 27 | |
| Processor frequency (maximum MCLK frequency), no FRAM wait states | fSYSTEM | 0 | 8 | MHz | NWAITSx = 0 | 27 | |
| Processor frequency (maximum MCLK frequency), with FRAM wait states | fSYSTEM | 0 | 16 | MHz | NWAITSx = 1 | 27 | |
| Processor frequency (maximum MCLK frequency), with FRAM wait states | fSYSTEM | 0 | 24 | MHz | NWAITSx = 2 | 27 | |
| Maximum ACLK frequency | fACLK | 40 | kHz | Grade T | 28 | ||
| Maximum SMCLK frequency | fSMCLK | 24 | MHz | Grade T | 28 | ||
| ADC supply voltage | DVCC | 2 | 3.6 | V | Grade T | 51 | |
| Positive-going input threshold voltage | VIT+ | 1.35 | 2.25 | V | VCC = 3.0 V | 43 | |
| Negative-going input threshold voltage | VIT- | 0.75 | 1.65 | V | VCC = 3.0 V | 43 | |
| Input voltage hysteresis (VIT+ - VIT-) | Vhys | 0.4 | 1.2 | V | VCC = 3.0 V | 43 | |
| Positive-going input threshold voltage | VIT+ | 0.9 | 1.5 | V | VCC = 2.0 V | 43 | |
| Negative-going input threshold voltage | VIT- | 0.5 | 1.1 | V | VCC = 2.0 V | 43 | |
| Input voltage hysteresis (VIT+ - VIT-) | Vhys | 0.3 | 0.8 | V | VCC = 2.0 V | 43 | |
| Pullup or pulldown resistor | RPull | 20 | 35 | 50 | kΩ | For pullup VIN = VSS, for pulldown VIN = VCC | 43 |
| High-level output voltage | VOH | 2.4 | 3 | V | I(OHmax) = -5 mA, VCC = 3.0 V | 43 | |
| High-level output voltage | VOH | 1.4 | 2 | V | I(OHmax) = -3 mA, VCC = 2.0 V | 43 | |
| Low-level output voltage | VOL | 0 | 0.6 | V | I(OLmax) = 3 mA, VCC = 2.0 V | 43 | |
| Digital input high-impedance leakage current | Ilkg(Px.y) | -30 | 30 | nA | VCC = 2.0 V, 3.0 V | 43 | |
| External interrupt timing (external trigger pulse duration to set interrupt flag) | t(int) | 50 | ns | VCC = 2.0 V, 3.0 V | 43 | ||
| SVSH power-down level | VSVSH- | 1.71 | 1.8 | 1.87 | V | 33 | |
| SVSH power-up level | VSVSH+ | 1.76 | 1.88 | 1.99 | V | 33 | |
| FLL lock frequency, 24 MHz, 25°C | fDCO,FLL | -1 | 1 | % | Measured at MCLK, internal trimmed REFO reference, VCC 3.0 V | 37 | |
| FLL lock frequency, 24 MHz | fDCO,FLL | -2 | 2 | % | Measured at MCLK, internal trimmed REFO reference, VCC 3.0 V | 37 | |
| FLL lock frequency, 24 MHz | fDCO,FLL | -0.5 | 0.5 | % | Measured at MCLK, XT1 crystal as reference, VCC 3.0 V | 37 | |
| Duty cycle | fDUTY | 40 | 50 | 60 | % | Measured at MCLK, XT1 crystal as reference, VCC 3.0 V | 37 |
| REFO absolute calibrated tolerance | -3.5 | 3.5 | % | -40°C to 105°C, VCC 1.8 V to 3.6 V | 40 | ||
| MODOSC frequency | fMODOSC | 3 | 3.8 | 4.6 | MHz | VCC 3.0 V | 41 |
| Internal reference, built-in positive reference voltage 2.5 V tolerance | VREF+ | -1.5 | 1.5 | % | REFVSEL = {2} for 2.5 V, INTREFEN = 1, VCC 3.0 V | 41 | |
| Internal reference, built-in positive reference voltage 2.0 V tolerance | VREF+ | -1.5 | 1.5 | % | REFVSEL = {1} for 2.0 V, INTREFEN = 1, VCC 2.5 V | 41 | |
| Internal reference, built-in positive reference voltage 1.5 V tolerance | VREF+ | -1.8 | 1.8 | % | REFVSEL = {0} for 1.5 V, INTREFEN = 1, VCC 1.8 V | 41 | |
| Operating supply current into DVCC terminal (internal reference) | IREF+ | 19 | 26 | µA | INTREFEN = 1, VCC 3 V | 41 | |
| Input offset voltage | VOFFSET | -30 | 30 | mV | eCOMP0, CPEN = 1, CPMSEL = 0 | 53 | |
| Input offset voltage | VOFFSET | -30 | 30 | mV | eCOMP1, CPEN = 1, CPMSEL = 0 | 54 | |
| eCOMP supply voltage | VCC | 2 | 3.6 | V | eCOMP0 | 53 | |
| eCOMP supply voltage | VCC | 2 | 3.6 | V | eCOMP1 | 54 | |
| Integral nonlinearity | INL | -0.5 | 0.5 | LSB | eCOMP0 | 53 | |
| Differential nonlinearity | DNL | -0.5 | 0.5 | LSB | eCOMP0 | 53 | |
| Integral linearity error (12-bit mode) | EI | -2.5 | 2.5 | LSB | Veref+ reference, VCC 2.4 V to 3.6 V | 52 | |
| Differential linearity error (12-bit mode) | ED | -1 | 1 | LSB | Veref+ reference, VCC 2.4 V to 3.6 V | 52 | |
| Offset error (12-bit mode) | EO | -1.5 | 1.5 | mV | Veref+ reference, VCC 2.4 V to 3.6 V | 52 | |
| Gain error (12-bit mode) | EG | -3 | 3 | LSB | Veref+ as reference, VCC 2.4 V to 3.6 V | 52 | |
| Total unadjusted error (12-bit mode) | ET | -4 | 4 | LSB | Veref+ as reference, VCC 2.4 V to 3.6 V | 52 | |
| ADC clock frequency, 10-bit mode | fADCCLK | 6 | MHz | VCC 2.4 V to 3.6 V | 51 | ||
| ADC clock frequency, 12-bit mode | fADCCLK | 4.4 | MHz | VCC 2.4 V to 3.6 V | 51 | ||
| Timer_B input clock frequency | fTB | 24 | MHz | Internal SMCLK or ACLK, external TBCLK with duty cycle 50% ±10% | 45 | ||
| Timer_B capture timing, minimum pulse duration | tTB,cap | 20 | ns | All capture inputs, VCC 2.0 V, 3.0 V | 45 | ||
| eUSCI input clock frequency (UART mode) | feUSCI | 24 | MHz | Internal SMCLK or MODCLK, external UCLK, duty cycle 50% ±10% | 45 | ||
| BITCLK clock frequency (equals baud rate in Mbaud) | fBITCLK | 5 | MHz | VCC 2.0 V, 3.0 V | 45 | ||
| SPI master eUSCI input clock frequency | feUSCI | 8 | MHz | Internal SMCLK, duty cycle 50% ±10% | 46 | ||
| Spy-Bi-Wire input frequency | fSBW | 0 | 8 | MHz | VCC 2.0 V, 3.0 V | 58 | |
| Spy-Bi-Wire low clock pulse duration | tSBW,Low | 0.028 | 15 | µs | VCC 2.0 V, 3.0 V | 58 | |
| TCK input frequency | fTCK | 0 | 10 | MHz | VCC 2.0 V, 3.0 V | 59 | |
| Junction-to-ambient thermal resistance, still air, QFP 48 pin (PT) | RθJA | 67.6 | ºC/W | JEDEC 2S2P board | 32 | ||
| Junction-to-case (top) thermal resistance, QFP 48 pin (PT) | RθJC | 24 | ºC/W | JEDEC 1S0P board | 32 | ||
| Junction-to-board thermal resistance, QFP 48 pin (PT) | RθJB | 31.6 | ºC/W | 32 | |||
| Active mode active current per MHz, execution from FRAM, no wait states | dIAM,FRAM/df | 142 | µA/MHz | VCC = 3.0 V, TA = 25°C | 28 | ||
| Internal very-low-power low-frequency oscillator frequency (VLO) | fVLO | 10 | kHz | Measured at MCLK, VCC 3.0 V | 40 | ||
| REFO calibrated frequency | fREFO | 32768 | Hz | Measured at MCLK, VCC 3.0 V | 40 | ||
| Safe BOR reset delay | tBOR,safe | 10 | ms | 33 | |||
| SVSH hysteresis | VSVSH_hys | 100 | mV | 33 | |||
| Input capacitance, digital only port pins | CI,dig | 3 | pF | VIN = VSS or VCC | 43 | ||
| Temperature sensor voltage | VSENSOR | 788 | mV | TJ = 30°C, VCC 2.0 V, 3.0 V | 41 | ||
| Temperature sensor coefficient | TCSENSOR | 2.32 | mV/°C | TJ = 30°C | 41 |
CAD (KiCad official)
- Symbol:
MSP430FR2155TPTR - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
msp430fr2155tptr-etched.step/msp430fr2155tptr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);msp430fr2155tptr.step/msp430fr2155tptr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (146 pp, sha256
13bb599d63348825, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).