Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

UC3706DW

Texas Instruments · Gate Drivers · SOIC-16-300mil

UC3706DW from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 B INHIBIT input Inhibit input for output B; a diode to the opposite power switch collector keeps one output from turning on until the other has turned off, and it is left open when the inhibit circuit is unused.
2 INV. INPUT input Inverting TTL-compatible digital input with a threshold of approximately 1.2V, no hysteresis, and a 5.5V maximum.
3 N.I. INPUT input Non-inverting TTL-compatible digital input with a threshold of approximately 1.2V, no hysteresis, and a 5.5V maximum.
4 GROUND power_in Ground pin, which must be connected to a common ground together with the other three ground pins.
5 GROUND power_in Ground pin, which must be connected to a common ground together with the other three ground pins.
6 A OUTPUT output Totem-pole output A that sources or sinks up to 1.5A peak (±500mA steady-state).
7 FLIP/FLOP input Grounding this pin activates the internal flip-flop to alternate the two outputs, and leaving it open makes the outputs operate simultaneously so they can be paralleled.
8 VC power_in Collector supply for the output stages, rated 40V maximum, and it draws no current when VIN is low.
9 STOP INV. input Inverting input of the analog shutdown comparator with a 130mV internal threshold, which is grounded when unused.
10 STOP NON-INV. input Non-inverting input of the analog shutdown comparator with a 130mV internal threshold and a common-mode range from ground to VIN-3V, which is grounded when unused.
11 B OUTPUT output Totem-pole output B that sources or sinks up to 1.5A peak (±500mA steady-state).
12 GROUND power_in Ground pin, which must be connected to a common ground together with the other three ground pins.
13 GROUND power_in Ground pin, which must be connected to a common ground together with the other three ground pins.
14 VIN power_in Supply input, optimized for 7 to 40V (5 to 40V operation, 40V maximum) with an internal 5V regulator, and the whole circuit is disabled when it is low.
15 INHIBIT REF input Inhibit threshold reference that can be set from 0.5 to 3.5V, and it is grounded when the inhibit circuit is unused.
16 A INHIBIT input Inhibit input for output A; a diode to the opposite power switch collector keeps one output from turning on until the other has turned off, and it is left open when the inhibit circuit is unused.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16-300mil
Category Motor Driver ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN Supply Current 8 10 mA VIN = 40V 2
VC Supply Current 4 5 mA VC = 40V, Outputs Low 2
VC Leakage Current 0.05 0.1 mA VIN = 0, VC = 30V, No Load 2
Digital Input Low Level 0.8 V 2
Digital Input High Level 2.2 V 2
Input Current -0.6 -1 mA VI = 0 2
Input Leakage 0.05 0.1 mA VI = 5V 2
Output High Saturation VC-VO 2 V IO = -50mA 3
Output Low Saturation VO 0.4 V IO = 50mA 3
Output Low Saturation VO 2.5 V IO = 500mA 3
Inhibit Threshold VREF 0.4 0.6 V VREF = 0.5V 3
Inhibit Threshold VREF 3.3 3.7 V VREF = 3.5V 3
Inhibit Input Current -10 -20 µA VREF = 0 3
Analog Threshold (UC2706 and UC3706) VCM 100 130 160 mV VCM = 0 to 15V, for the UC2706 and UC3706 3
Input Bias Current -10 -20 µA VCM = 0 3
Thermal Shutdown 155 °C 3
Rise Time Delay (from Inverting Input) 110 130 140 ns From Inv. Input to Output 3
10% to 90% Rise Time (from Inverting Input) 20 40 60 ns From Inv. Input to Output 3
Fall Time Delay (from Inverting Input) 80 90 110 ns From Inv. Input to Output 3
90% to 10% Fall Time (from Inverting Input) 25 30 50 ns From Inv. Input to Output 3
Rise Time Delay (from Noninverting Input) 120 130 140 ns From N.I. Input to Output 3
10% to 90% Rise Time (from Noninverting Input) 20 40 60 ns From N.I. Input to Output 3
Fall Time Delay (from Noninverting Input) 100 120 130 ns From N.I. Input to Output 3
90% to 10% Fall Time (from Noninverting Input) 25 30 50 ns From N.I. Input to Output 3
VC Cross-Conduction Current Spike Duration 25 ns Output Rise 3
VC Cross-Conduction Current Spike Duration 0 ns Output Fall 3
Inhibit Delay 250 ns Inhibit Ref. = 1V, Inhibit Inv. = 0.5 to 1.5V 3
Analog Shutdown Delay 180 ns Stop Non-Inv. = 0V, Stop Inv. = 0 to 0.5V 3
Supply Voltage VIN 40 V 2
Collector Supply Voltage VC 40 V 2
Output Current (Steady-State) -500 500 mA Each output, source or sink, steady-state 2
Digital Inputs 5.5 V 2
Operating Temperature Range (family rating) TA -55 125 °C 2
Storage Temperature Range -65 150 °C 2
Lead Temperature (Soldering) 300 °C 10 seconds 2
Supply Voltage (recommended) VIN 7 40 V Circuit optimized for 7 to 40V supply 4
Operating Temperature Range (UC3706) TA 0 70 °C UC3706 range per electrical characteristics header 2

CAD (KiCad official)

  • Symbol: UC3706DW
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: uc3706dw-etched.step / uc3706dw-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); uc3706dw.step / uc3706dw.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (11 pp, sha256 097d5f31b4732c03, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF